BS 6293-2:1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace. MJ threads Limit dimensions for bolts and nuts
Available format(s)
Hardcopy , PDF
Superseded date
15-01-2000
Superseded by
Language(s)
English
Published date
15-03-1994
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
National foreword
1 Scope
2 Normative references
3 Nominal diameters and pitches
4 Tolerance classes
5 Provisions for coated threads
6 Limit dimensions for finished parts (coated or non-coated)
List of references
Defines limit dimensions of MJ threads for bolts and nuts of nominal diameter 1,6 mm to 39 mm for aerospace construction.
| Committee |
ACE/12
|
| DevelopmentNote |
Supersedes BS 6293-2(1982). (10/2013)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| BS EN 2264:1996 | Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) /235°C |
| BS EN 2886:1996 | Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C |
| BS 3643-1:1981 | ISO metric screw threads Principles and basic data |
| BS A 312:1997 | Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS EN 2887:1995 | Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature)/425°C |
| BS 7751-1:1994 | Prevailing torque type wire thread inserts Specification for ISO metric coarse pitch threads |
| BS EN 2650:1997 | Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) /425°C |
| BS EN 2649:1995 | Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C |
| BS A 310:1995 | Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa. Dimensions |
| BS A 315:1997 | Aerospace. Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120°C, 450 MPa (at ambient temperature)/235°C, 600 MPa (at ambient temperature)/425°C, 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C, 900 MPa (at ambient temperature)/650°C, 1100 MPa (at ambient temperatu |
| BS EN 2354:1989 | Specification for eye-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads |
| BS EN 2654:1997 | Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated. Classification: 380 MPa (at ambient temperature)/80°C |
| BS EN 2652:1997 | Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C |
| BS EN 2651:1997 | Screws, pan head, slotted, threaded to head, in brass, tin plated. Classification: 380 MPa (at ambient temperature)/80°C |
| BS EN 2353:1989 | Specification for turnbarrels, control cable in corrosion resisting steel. Dimensions and loads |
| BS EN 2587:1990 | Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads |
| BS EN 2068:1996 | Rod ends with self-lubricating self-aligning bearings. Technical specification |
| BS EN 2583:1997 | Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1275 MPa (at ambient temperature)/650°C. Technical specification |
| BS EN 2609:1989 | Specification for turnbarrels, control cable in copper-zinc alloys. Dimensions and loads |
| BS EN 2653:1997 | Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) /425°C |
| BS A 309:1994 | Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS EN 2601:1996 | Fork ends, adjustable. Technical specification |
| BS EN 2928:1996 | Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification: 1275 MPa (at ambient temperature)/650°C |
| BS EN 2870:1996 | Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature) /315°C |
| BS EN 3740:1997 | Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS A 307:1994 | Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS A 311:1997 | Aerospace. Screws, 100° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS A 313:1997 | Areospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS EN 2907:1996 | Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1 100 MPa (at ambient temperature)/650°C |
| BS EN 2884:1996 | Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS 7752-2:1994 | Free running type wire thread inserts Specification for ISO metric fine pitch threads |
| BS EN 2926:1996 | Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 2874:1996 | Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1550 MPa (at ambient temperature) /315°C |
| BS EN 2940:1996 | Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900MPa (at ambient temperature)/650°C |
| BS A 304:1994 | Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS EN 2885:1996 | Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C |
| BS EN 2938:1996 | Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 2933:1996 | Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650°C |
| BS EN 2910:1994 | Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650°C |
| BS 7751-2:1994 | Prevailing torque type wire thread inserts Specification for ISO metric fine pitch threads |
| BS EN 2911:1995 | Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 1100 MPa (at ambient temperature)/650°C |
| BS EN 2930:1996 | Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification:1210 MPa (at ambient temperature)/730°C |
| BS EN 2927:1996 | Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650°C |
| BS EN 2355:1989 | Specification for fork-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads |
| BS EN 2356:1989 | Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel. Dimensions and loads |
| BS EN 2908:1994 | Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650°C |
| BS EN 2906:1994 | Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650°C |
| BS EN 2498:1990 | Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank. Dimensions and loads |
| BS EN 2753:1996 | Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification. 1100 MPa (at ambient temperature) / 235°C |
| BS EN 2934:1996 | Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification:1275 MPa (at ambient temperature)/650°C |
| BS EN 2935:1996 | Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification:1210 MPa (at ambient temperature)/730°C |
| BS EN 2936:1996 | Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification: 1210 MPa (at ambient temperature)/730°C |
| BS EN 2931:1993 | Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 2909:1995 | Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 1100 MPa (at ambient temperature)/650°C |
| BS EN 2932:1996 | Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 2357:1989 | Specification for stud-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads |
| BS EN 2897:1996 | Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) /235°C |
| BS EN 2939:1994 | Screws, 100° countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 2929:1996 | Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C |
| BS EN 2289:1996 | Rod bodies in aluminium alloy for flight controls. Technical specification |
| BS A 308:1994 | Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| EN 2753:1996 | Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/235 °C |
| ISO 5855-1:1999 | Aerospace MJ threads Part 1: General requirements |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 1501:2009 | ISO miniature screw threads |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.