BS 6180:2011
Current
The latest, up-to-date edition.
Barriers in and about buildings. Code of practice
Hardcopy , PDF
English
31-03-2011
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials, components and methods of design
and construction
5 Preliminary considerations
6 Design criteria
7 Concrete
8 Glass
9 Masonry
10 Metals
11 Plastics
12 Timber
13 Composites
14 Installation
Annexes
Annex A (normative) - Vehicle impact on barriers
Annex B (normative) - Bolt fixing of glass in barriers
Bibliography
Provides recommendations and guidance for the design and construction of temporary and permanent barriers to be provided in and about buildings and places of assembly, such barriers being positioned and designed to protect persons from various hazards and to restrict or control the movement of persons or vehicles.
Committee |
B/208/1
|
DevelopmentNote |
Supersedes BS 6180(1999) and 10/30212801 DC. (03/2011)
|
DocumentType |
Standard
|
Pages |
54
|
PublisherName |
British Standards Institution
|
Status |
Current
|
This British Standard gives recommendations and guidance for the design and construction of temporary and permanent barriers to be provided in and about buildings and places of assembly, such barriers being positioned and designed to protect persons from various hazards and to restrict or control the movement of persons or vehicles. This British Standard applies to: barriers that indicate routes; barriers capable of stopping or diverting moving vehicles within areas where vehicle speed is restricted to a maximum of 16km/h (4.44m/s, 10 mile/h); walls, glazing and other elements of buildings or structures where such elements act as protective barriers; areas other than spectator areas of sports halls and buildings used for spectator sports. This British Standard does not apply to: barriers for resisting impact from vehicles travelling at speeds greater than 16km/h, e.g. bridge parapets beyond the curtilage of a building, or highway safety barriers (see BS6779); barriers used in building operations and works of engineering construction; safety barriers, with or without opening gate features, for the protection of children up to 24 months, where the safety requirement is covered by a specific safety standard, e.g. BSEN1930; permanent means of access to machinery (see BSENISO14122, all parts); barriers used in spectator areas of sports halls, and buildings used for spectator sports (see BSEN13200, all parts).
BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
ISO 7599:2010 | Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium |
BS EN 10253-1:1999 | Butt-welding pipe fittings Wrought carbon steel for general use and without specific inspection requirements |
BS EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
BS 4921:1988 | Specification for sherardized coatings on iron or steel |
BS EN 12167:2011 | Copper and copper alloys. Profiles and bars for general purposes |
BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
BS EN 10143:2006 | Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape |
BS EN ISO 2560:2009 | Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification |
BS 6206:1981 | Specification for impact performance requirements for flat safety glass and safety plastics for use in buildings |
BS 6150(2006) : 2006 | PAINTING OF BUILDINGS - CODE OF PRACTICE |
BS 6496:1984 | Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings |
BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
BS EN 572-3:2012 | Glass in building. Basic soda lime silicate glass products Polished wired glass |
BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
BS EN 1991-1-1:2002 | Eurocode 1. Actions on structures General actions - Densities, self-weight, imposed loads for buildings |
BS EN 1090-1 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
BS 4729(2005) : 2005 | CLAY BRICKS OF SPECIAL SHAPES AND SIZES - RECOMMENDATIONS |
BS EN ISO 7599:2010 | Anodizing of aluminium and its alloys. General specifications for anodic oxidation coatings on aluminium |
BS EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
BS EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements |
BS EN 1991-1-4 : 2005 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
BS EN 12600:2002 | Glass in building. Pendulum test. Impact test method and classification for flat glass |
DD CEN/TS 15680 : DRAFT 2007 | PREFABRICATED TIMBER STAIRS - MECHANICAL TEST METHODS |
BS 6270-3:1991 | Code of practice for cleaning and surface repair of buildings Metals (cleaning only) |
BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
BS EN 1011-2:2001 | Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels |
BS EN 10219-2:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels Tolerances, dimensions and sectional properties |
BS EN 1930:2011 | Child use and care articles. Safety barriers. Safety requirements and test methods |
BS 4842:1984 | Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings |
BS EN ISO 6158:2011 | Metallic and other inorganic coatings. Electrodeposited coatings of chromium for engineering purposes |
BS EN 12206-1:2004 | Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder |
BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS EN 572-6:2012 | Glass in building. Basic soda lime silicate glass products Wired patterned glass |
PD 6484:1979 | Commentary on corrosion at bimetallic contacts and its alleviation |
BS 4592-0(2006) : 2006 | FLOORING, STAIR TREADS AND HANDRAILS FOR INDUSTRIAL USE - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION |
BS EN 12163:2011 | Copper and copper alloys. Rod for general purposes |
BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
BS EN 12164:2011 | Copper and copper alloys. Rod for free machining purposes |
BS EN ISO 3882:2003 | Metallic and other inorganic coatings. Review of methods of measurement of thickness |
BS EN 1011-1:2009 | Welding. Recommendations for welding of metallic materials General guidance for arc welding |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.