BS 3274:1960
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Specification for tubular heat exchangers for general purposes
Hardcopy , PDF
25-09-2012
English
28-09-1960
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Cooperating organizations
Foreword
Introduction
Specification
Section one. General
1. Scope
2. Nomenclature
3. Definitions
4. Pressure classifications
Section two. Materials and stresses
5. Carbon and low alloy steels and cast iron
6. Non-ferrous metals and stainless steels
7. Other materials
8. Stress values for non-ferrous metals not in the
annealed condition
9. Materials to comply with British Standards
10. Test certificates for materials
11. Materials for use at low temperatures
12. Gaskets
13. Gland packing
Section three. Construction
14. Design
15. Fabrication
16. Corrosion allowance
17. Type limitations
18. Tolerances
19. Shells and shell covers
20. Tubes
21. Tube plates
22. Baffles and support plates
23. Floating heads
24. Gaskets
25. Channels and channel covers
26. Branches and connections
27. Shell flanges
28. Bolting
Section four. Inspection, marking, testing and
preparation for despatch
29. Inspection
30. Marking
31. Hydraulic testing
32. Preparation for despatch
Tables
1. Minimum shell thickness
2. Standard tube diameters and minimum nominal
thicknesses
3. Minimum tube-plate thickness
4. Tube hole tolerances
5. Special tube and hole clearance
6. Baffle dimensions
7. Baffle and support plate thickness
8. Tie rods
9. Test pressures
10. Testing procedure for basic types of exchanger
11. Design stresses; copper and copper alloys
12. Design stresses; aluminium and aluminium alloys
13. Design stresses; nickel and nickel alloys
14. Design stresses; stainless steels
15. Dimensions:
Notes relating to Tables 15A to 15L
15A. Ring flanges, Class 75, gaskets - full faced
insertion rubber
15B. Ring flanges, Class 75, gaskets - compressed
asbestos
15C. Ring flanges, Class 150, gaskets - compressed
asbestos
15D. Ring flanges, Class 300, gaskets - compressed
asbestos or metal-jacketed asbestos
15E. Ring flanges, Class 450, gaskets - metal-
jacketed asbestos
15F. Ring flanges, Class 600, gaskets - metal-
jacketed asbestos
15G. Welding-neck flanges, Class 75, gaskets -
metal-jacketed asbestos
15H. Welding-neck flanges, Class 150, gaskets -
metal-jacketed asbestos
15J. Welding-neck flanges, Class 300, gaskets -
metal-jacketed asbestos
15K. Welding-neck flanges, Class 450, gaskets -
metal-jacketed asbestos
15L. Welding-neck flanges, Class 600, gaskets -
metal-jacketed asbestos
Appendices
A. Heat exchanger data sheet
B. Manufacturers' report and test certificate for
tubular heat exchangers
C. Conversion factors from British to metric units
Figures
1. Type 1. Fixed tube plate
2. Type 2. U-tubes
3. Type 2. U-tube (re-boiler or evaporator)
4. Type 3. (i) Internal floating head with clamp
ring
5. Type 3. (ii) Internal floating head without clamp
ring
6. Type 3. (ii) Internal floating head without clamp
ring (re-boiler type)
7. Type 3. (iii) Floating head, external packed
8. Type 3. (iv) Floating head, internal packed
9. External tolerances
10. Finished tolerances on tube-plates, covers
and flanges
Design, construction, inspection, testing of cylindrical shell and plain tube heat exchangers. Shell diameters 6 in to 42 in, tube lengths 6 ft to 16 ft, tube diameters ½ in to 1½ in. Type 1: fixed tube-plate (non-removable tube bundle); Type 2: U-tube (removable tube bundle); Type 3: floating head (removable tube bundle).
| Committee |
PVE/1
|
| DevelopmentNote |
Inactive for the new design. (12/2007)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| BS 1306:1975 | Specification for copper and copper alloy pressure piping systems |
| PD 5500:2000 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| 07/30160560 DC : DRAFT JAN 2007 | PD 5500 AMD 2 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS PD5500(2009) : 2009 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| PD 5500:2003 | Specification for unfired fusion welded pressure vessels |
| BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 4434:1995 | Specification for safety and environmental aspects in the design, construction and installation of refrigerating appliances and systems |
| BS PD5500(2012) : 2012 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 5624:1978 | Code of practice for the lining of vessels and equipment for chemical processes: copper and copper alloys |
| BS 6880-2:1988 | Code of practice for low temperature hot water heating systems of output greater than 45 kW Selection of equipment |
| BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
| BS 853(1990) : 1990 AMD 8979 | SPECIFICATION FOR VESSELS FOR USE IN HEATING SYSTEMS - CALORIFIERS AND STORAGE VESSELS FOR CENTRAL HEATING AND HOT WATER SUPPLY |
| BS 853-1(1996) : 1996 | SPECIFICATION FOR VESSELS FOR USE IN HEATING SYSTEMS - CALORIFIERS AND STORAGE VESSELS FOR CENTRAL HEATING AND HOT WATER SUPPLY |
| BS 1867(1952) : LATEST | SOLID DRAWN ALUMINIUM BRONZE TUBES FOR GENERAL PURPOSES (7 PER CENT ALUMINIUM) |
| BS 1750(1961) : LATEST | BOLTING FOR THE PETROLEUM INDUSTRY |
| BS 1607(1950) : LATEST | SEAMLESS ALLOY STEEL PIPE FOR HIGH-TEMPERATURE SERVICE IN THE PETROLEUM INDUSTRY |
| BS 1605(1950) : LATEST | SEAMLESS CARBON MOLYBDENUM ALLOY STEEL PIPE FOR HIGH TEMPERATURE SERVICE IN THE PETROLEUM INDUSTRY |
| BS 1400:1948 | Schedule of copper alloy ingots and copper and copper alloy castings |
| BS 24-5:1954 | Railway rolling stock material Copper |
| BS 1507 & 1508(1950) : LATEST | STEEL PIPES AND TUBES FOR PRESSURE VESSELS FOR USE IN THE CHEMICAL AND ALLIED INDUSTRIES |
| BS 1628(1950) : LATEST | COLD DRAWN ALLOY STEEL TUBES FOR HEAT EXCHANGERS AND CONDENSERS FOR THE PETROLEUM INDUSTRY |
| BS 1602(1950) : LATEST | ELECTRIC FUSION-WELDED CARBON STEEL PIPE FOR USE IN THE PETROLEUM INDUSTRY (SIZES 30IN AND OVER) |
| BS 3074:1959 | Specification for nickel and nickel alloys: tube |
| BS 1502:1968 | Specification for steels for fired and unfired pressure vessels: sections and bars |
| BS 1471:1963 | Specification for wrought aluminium and aluminium alloys for general engineering purposes - drawn tube |
| BS 3059-2:1978 | Specification for steel boiler and superheater tubes Carbon, alloy and austenitic stainless steel tubes with specified elevated temperature properties |
| BS 1476:1955 | Wrought aluminium and aluminium alloys for general engineering purposes. Bars rods and sections |
| BS 1464(1957) : LATEST | SOLID DRAWN COPPER ALLOY TUBES FOR HEAT EXCHANGE EQUIPMENT IN THE PETROLEUM INDUSTRY |
| BS 1474:1963 | Specification for wrought aluminium and aluminium alloys for general engineering purposes - bars, extruded round tube and sections |
| BS 2017(1963) : LATEST | COPPER TUBES FOR GENERAL PURPOSES |
| BS 1500-1:1958 | Specification for fusion welded pressure vessels for general purposes Carbon and Low Alloy Steels |
| BS 1601(1950) : LATEST | ELECTRIC FUSION-WELDED CARBON STEEL PIPE FOR USE IN THE PETROLEUM INDUSTRY (SIZES 4IN UP TO BUT NOT INCLUDING 30IN) |
| BS 1306-2:1948 | Seamless copper tubes for steam services |
| BS 2041(1953) : LATEST | TUBULAR HEAT EXCHANGERS FOR USE IN THE PETROLEUM INDUSTRY |
| BS 3072:1968 | Nickel and nickel alloys: sheet and plate |
| BS 1603(1950) : LATEST | ELECTRIC FUSION-WELDED CARBON STEEL PIPE FOR HIGH-TEMPERATURE SERVICE IN THE PETROLEUM INDUSTRY (SIZES 18 IN AND OVER) |
| BS 1541(1963) : LATEST | ROLLED COPPER AND COPPER ALLOY PLATE FOR HEAT EXCHANGER AND CONDENSER TUBE PLATES |
| BS 1035-40, 1172-74, 1861, 1954:1964 | Raw copper |
| BS 885:1953 | Brass tubes for general purposes 70/30 arsenical brass, aluminium brass |
| BS 1503(1969) : LATEST | STEELS FOR FIRED AND UNFIRED PRESSURE VESSELS - FORGINGS |
| BS 1606(1950) : LATEST | SEAMLESS CHROMIUM MOLYBDENUM ALLOY STEEL PIPE FOR HIGH TEMPERATURE SERVICE IN THE PETROLEUM INDUSTRY |
| BS 1470:1955 | Wrought aluminium and aluminium alloys for general enginerring purposes, sheet and strip |
| BS 1948:1953 | Copper-silicon alloy rods, sections and forgings (for general engineering purposes) |
| BS 1133(1950) : LATEST | |
| BS 1506:1986 | Specification for carbon, low alloy and stainless steel bars and billets for bolting material to be used in pressure retaining applications |
| BS 1515(1965) : LATEST | |
| BS 378(1963) : LATEST | SOLID DRAWN COPPER ALLOY TUBES FOR CONDENSERS, EVAPORATORS, HEATERS AND COOLERS |
| BS 1604(1950) : LATEST | SEAMLESS CARBON STEEL PIPE FOR HIGH-TEMPERATURE SERVICE IN THE PETROLEUM INDUSTRY |
| BS 1627(1950) : LATEST | COLD DRAWN LOW CARBON STEEL TUBES FOR HEAT EXCHANGERS AND CONDENSERS FOR THE PETROLEUM INDUSTRY |
| BS 1504:1976 | Specification for steel castings for pressure purposes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.