BS 308-3:1972
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Engineering drawing practice. Geometrical tolerancing
Hardcopy , PDF
31-08-1990
English
27-02-1976
Principles using ISO symbols. Establishes the necessary definition, shows methods of indicating geometrical tolerances.
Committee |
TPR/1
|
DevelopmentNote |
Supersedes BS 308A(1964) (07/2004)
|
DocumentType |
Standard
|
Pages |
76
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO 7083:1983 | Similar to |
ISO 5459:2011 | Similar to |
ISO 1101:2017 | Similar to |
ISO 1660:2017 | Similar to |
BS 5550-2.9.1:1978 | Cinematography. 16 mm film. Projector spools Specification for dimensions of spools for 16 mm motion-picture projectors (up to and including 120 m capacity: 18 cm size) |
BS 6494-1:1984 | Hydraulic fluid power valve mounting surfaces Specification for four-port directional control valves |
BS AU 214-3:1988 | Gearbox flanges Specification for dimensions for type S gearbox flanges for commercial vehicles and buses |
BS 387:1979 | Specification for interchangeability dimensions of the drive of solid and segmental circular saws for cold cutting of metals: saw diameter range 224 mm to 2240 mm |
BS 6288-1:1982 | Magnetic tape sound recording and reproducing systems Specification for general conditions and requirements |
BS 1881-105:1984 | Testing concrete Method for determination of flow |
BS 5380:1976 | Specification for hydraulic port and stud coupling using \'O\'-ring sealing and \'G\' series fastening threads |
BS 6322-1:1982 | Tolerances for fasteners Specification for tolerances of bolts, screws and nuts with thread diameters ≥ 1.6 mm and ≤ 150 mm and product grades A, B and C |
BS 4656-29:1981 | Accuracy of machine tools and methods of test Specification for automatic lathes, multi-spindle (indexing drum) type |
BS 6319-1:1983 | Testing of resin and polymer/cement compositions for use in construction Method for preparation of test specimens |
BS 6547:1984 | Method for measurement of variations of form and position of beams in textile machinery |
BS 4551:1980 | Methods of testing mortars, screeds and plasters |
BS 6322-3:1982 | Tolerances for fasteners. Specification for tolerances of washers for metric bolts, screws and nuts with thread diameters from 1 mm up to and including 150 mm. Product grades A and C |
BS 3934-10:1992 | Mechanical standardization of semiconductor devices Schedule of UK national drawings giving dimensions |
BS 5892-6:1980 | Railway rolling stock material (metric) Specification for wheelsets for traction and trailing stock |
BS AU 214-2:1988 | Gearbox flanges Specification for dimensions for type A gearbox flanges for commercial vehicles and buses |
BS 6494-6:1989 | Hydraulic fluid power valve mounting surfaces Specification for pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves |
BS 308-1:1984 | Engineering drawing practice Recommendations for general principles |
BS 6276:1987 | Specification for dimensions and identification code for mounting flanges and shafts ends for hydraulic fluid power pumps and motors |
BS 122-3:1987 | Milling cutters Specification for milling cutters except screwed shank cutters |
BS 308-2:1985 | Engineering drawing practice Recommendations for dimensioning and tolerancing of size |
BS 4210-1:1977 | Specification for 35 mm microcopying of technical drawings Operating procedures |
BS 4656-28:1988 | Accuracy of machine tools and methods of test Specification for numerically controlled turning machines up to and including 1500 mm turning diameter |
BS 2856:1973 | Precise conversion of inch and metric sizes on engineering drawings |
BS 4301:1982 | Recommendations for preparation of drawings for optical elements and systems |
BS 4656-21:1988 | Accuracy of machine tools and methods of test Specification for boring and milling machines, horizontal spindle table type and rotary table type |
BS 4656-22:1988 | Accuracy of machine tools and methods of test Specification for vertical boring and turning lathes, single and double column types |
BS 122-5:1986 | Milling cutters Specification for mounting dimensions and accessories |
BS 4994:1987 | Specification for design and construction of vessels and tanks in reinforced plastics |
BS 1881-115:1986 | Testing concrete Specification for compression testing machines for concrete |
BS C 20:1986 | Specification for aircraft gaseous oxygen replenishment connection (inch dimensions) |
BS 4210-2:1977 | Specification for 35 mm microcopying of technical drawings Photographic requirements for silver film |
BS 4210-3:1977 | Specification for 35 mm microcopying of technical drawings Unitized microfilm carriers |
BS 4656-32:1983 | Accuracy of machine tools and methods of test Specification for boring and milling machines, planer type |
BS 3800-1:1990 | General tests for machine tools Code of practice for testing geometric accuracy of machines operating under no load or finishing conditions |
BS 4358:1968 | Glossary of terms used in air gauging with notes on the technique |
BS 4500-5:1988 | ISO limits and fits Specification for system of cone tolerances for conical workpieces from <i>C</i> = 1:3 to 1:500 and lengths from 6 mm to 630 mm |
BS 1726-1:1987 | Coil springs. Guide for the design of helical compression springs |
BS 3892-1:1982 | Pulverized-fuel ash Specification for pulverized-fuel ash for use as a cementitious component in structural concrete |
BS 6322-2:1982 | Tolerances for fasteners Specification for tolerances of bolts, screws and nuts with thread diameters from 1 mm up to 3 mm and product grade F, for fine mechanics |
BS 6554-1:1984 | Laminations for transformers and inductors for use in telecommunication and electronic equipment Specification for dimensions, mechanical characteristics and electrical testing |
BS 5655-9:1985 | Lifts and service lifts Specification for guide rails |
BS AU 214a-1:1987 | Gearbox flanges Specification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses |
DEFSTAN 25-16/1(1977) : 1977 AMD 1 | PLASTICS (POLYAMIDE) HOSE AND TUBING, AIRBRAKE, AUTOMOTIVE |
BS 6102-1:1981 | Cycles Specification for safety requirements for bicycles |
BS 122-5:1978 | Milling cutters Mounting dimensions and accessories |
BS AU 226:1988 | Specification for nominal dimensions and tolerances of flywheel housings for reciprocating internal combustion engines |
BS 4480-5:1979 | Plain bearings: metric series Dimensions, tolerances and methods of checking thin-walled half bearings |
BS 4656-1:1981 | Accuracy of machine tools and methods of test Specification for lathes, general purpose type |
BS 1881-118:1983 | Testing concrete Method for determination of flexural strength |
BS 4480-4:1979 | Specification for plain bearings: metric series Dimensions, tolerances and methods of checking wrapped bushes |
BS 4656-35:1987 | Accuracy of machine tools and methods of test Specification for capstan, turret and automatic lathes, single spindle type less than 25 mm diameter capacity |
BS 5100:1974 | Guide to the principles of geometrical tolerancing (conforming to BS 308:Part 3:1972) |
BS A 297:1987 | Specification for internal drive, offset cruciform recess (Torq-Set(R)) for rotary fastening devices. Metric series |
BS 7228-5.1(1989) : 1989 | INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - SPECIFICATION FOR CIRCULAR FORM (FORM A) |
BS 6494-2:1986 | Hydraulic fluid power valve mounting surfaces Specification for four-port and five-port servo-valves |
ISO 1708:1989 | Acceptance conditions for general purpose parallel lathes Testing of the accuracy |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.