BS 2011-2.1T:1981
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Environmental testing. Tests Test T. Soldering
Hardcopy , PDF
31-01-2009
English
31-07-1981
National foreword
1 Scope
2 Object
3 Terminology
4 Test Ta: Solderability of wire and tag terminations
5 Test Tb: Resistance of components to soldering heat
6 Test Tc: Solderability of printed boards and metal-
clad laminates
Appendices
A Example of apparatus for accelerated steam ageing
process
B Specification for solder
C Specification for flux constituents
D Specification for solder globule apparatus
E Specimen holder and timing needle arrangement
Tests of the solderability of wire and tag terminations, printed boards and metal-clad laminates; and a test of the ability of components to withstand heating stresses produced by soldering.
Committee |
GEL/104
|
DevelopmentNote |
Supersedes 79/30728 DC. (06/2004)
|
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
IEC 60068-2-54:2006 | Similar to |
UNE-EN 60851-4:1996 | Identical |
DEFSTAN 03-9/2(1992) : 1992 | ELECTRO-DEPOSITION OF SILVER |
DEFSTAN 03-17/3(2007) : 2007 | ELECTRO-DEPOSITION OF GOLD |
DEFSTAN 03-9/3(2007) : 2007 | ELECTRO-DEPOSITION OF SILVER |
DEFSTAN 02-643/3(2010) : 2010 | REQUIREMENTS FOR CABLES ELECTRICAL, SUB-MINIATURE AND SMALL MULTI-CORE, LIMITED FIRE HAZARD FOR SPECIAL PURPOSE |
DEFSTAN 03-17/2(1992) : 1992 | ELECTRO - DEPOSITION OF GOLD |
SAE AMS 03-9 : 2017 | ELECTRO-DEPOSITION OF SILVER |
BS 6137:1982 | Specification for electroplated coatings of tin/lead alloys |
DEFSTAN 61-12(PT5)/4(2005) : 2005 | WIRES, CORDS, AND CABLES, ELECTRICAL - METRIC UNITS - PART 5: CABLES, SPECIAL PURPOSE, ELECTRICAL AND CABLES, POWER, ELECTRICAL (SMALL MULTI-CORE CABLES) |
DEFSTAN 22-48/2(2001) : 2001 | SPECIFICATION FOR POSITIVE TEMPERATURE COEFFICIENT THERMISTORS FOR THERMAL PROTECTION OF ELECTRIC MOTORS |
DEFSTAN 02-643/2(2002) : 2002 | REQUIREMENTS FOR CABLES ELECTRICAL, SUB-MINIATURE AND SMALL MULTICORE, LIMITED FIRE HAZARD FOR SPECIAL PURPOSES |
DEFSTAN 02-526/2(2008) : 2008 | REQUIREMENTS FOR CABLES ELECTRIC, ELASTOMERIC, LIMITED FIRE HAZARD SHEATHED FOR GENERAL SERVICES |
BS EN 123800:1997 | Harmonized system of quality assessment for electronic components. Sectional specification. Flexible multilayer printed boards with through connections |
BS CECC 20000:1983 | Harmonized system of quality assessment for electronic components: generic specification: semiconductor optoelectronic and liquid crystal devices |
SAE AMS 03-17 : 2018 | ELECTRO-DEPOSITION OF GOLD |
DEFSTAN 61-12(PT5)/5(2008) : 2008 | WIRES, CORDS AND CABLES, ELECTRICAL-METRIC UNITS - PART 5: CABLES, SPECIAL PURPOSE, ELECTRICAL AND CABLES, POWER, ELECTRICAL (SMALL MULTI-CORE CABLES) |
BS EN 147000:1995 | Harmonized system of quality assessment for electronic components. Generic specification. Sockets for use with electrical relays of assessed quality |
BS QC 390000:1992 | Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Generic specification |
BS 6231:1981 | Specification for PVC-insulated cables for switchgear and controlgear wiring |
BS EN 61249-5-4:1997 | Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatings Conductive inks |
BS 123400-003:2001 | System of quality assessment. Capability detail specification. Flexible single-sided and double-sided printed boards without through-connections |
BS CECC 32200:1989 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed chip capacitors with metallized electrodes and polyethylene-terephthalate dielectric for direct current |
BS 6893-2:1987 | Flexible insulating sleeving for electrical purposes Methods of test |
BS 4393:1969 | Specification for tin or tin-lead coated copper wire |
BS QC 960000:1992 | Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Generic specification |
BS EN 134000:1995 | Harmonized system of quality assessment for electronic components. Generic specification: variable capacitors. (Qualification approval and capability approval) |
BS EN 116000-3:1996 | Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays Test and measurement procedures |
BS 6231:1990 | Specification for PVC-insulated cables for switchgear and controlgear wiring |
BS 6231:1998 | Specification for PVC-insulated cables for switchgear and controlgear wiring |
BS 2011-2.1Td:1990 | Environmental testing. Tests Test Td. Solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
BS EN 116303:1996 | Harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical all-or-nothing heavy load relays of assessed quality (hermetically sealed, 5A to 25A) |
BS 9522 N0003:1990 | Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet couplingnon-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealedwith non-removable solder contact styles. Full plus airframe fit assessment |
BS 2011-2.1Ta:1989 | Environmental testing. Tests Test Ta. Soldering. Solderability testing by the wetting balance method |
BS 6368:1983 | Specification for axial lead cores made of magnetic oxides or iron powder |
BS EN 61797-1:1997 | Transformers and inductors for use in telecommunication and electronic equipment. Main dimensions of coil formers Coil formers for laminated cores |
BS 2011-1.1:1983 | Environmental testing General and guidance |
BS QC 221400:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with screw coupling. Characteristic impedance 50 ohms (Type SMC) |
BS EN 140103:1996 | Harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound resistors (Assessment level P) |
BS CECC 63000:1990 | Harmonized system of quality assessment for electronic components. Generic specification: film and hybrid integrated circuits |
BS 4292-2:1989 | Method for specifying electroplated coatings of gold and gold alloys Gold and gold alloys for decorative and protective purposes |
BS 5057:1992 | Specification for flat, quick-connect terminations |
BS CECC 00802:1994 | Harmonized system of quality assessment for electronic components. Guidance document: CECC Standard method for the specification of surface mounting components (SMDs) of assessed quality |
BS 4292-1:1989 | Method for specifying electroplated coatings of gold and gold alloys Gold and gold alloys for engineering purposes |
BS QC 221300:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling. Characteristic impedance 50 ohms (Type SMB) |
BS EN 117000:1997 | Harmonized system of quality assessment for electronic components. Generic specification. Solid state all-or-nothing relays. Generic data and methods of test |
BS EN 137000:1996 | Harmonized system of quality assessment for electronic components. Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors |
BS EN 119000:1997 | Harmonized system of quality assessment for electronic components. Generic specification: dry and mercury wetted reed contact units |
BS QC 410000:1990 | Harmonized system of quality assessment for electronic components: potentiometers for use in electronic equipment |
BS CECC 63000:1985 | Harmonized system of quality assessment for electronic components: generic specification: film and hybrid integrated circuits |
BS EN 123600:1997 | Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid multilayer printed boards with through connections |
BS 4584-103.3:1992 | Metal-clad base materials for printed wiring boards. Special materials used in connection with printed circuits Specification for permanent polymer coating materials (solder resist) for use in the fabrication of printed boards |
BS 4290:1989 | Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes |
BS G 230:1984 | Specification for general requirements for aircraft electrical cables (second series) |
BS 6221-11:1991 | Printed wiring boards Specification for flex-rigid multilayer printed boards with through connections |
BS 3G 230:2000 | Specification for general requirements for aircraft electrical cables (second series) |
BS 6885:1988 | Specification for miniature cartridge fuse links for use on printed wiring boards |
BS 6221-2:1991 | Printed wiring boards Methods of test |
BS QC 420000:1992 | Harmonized system of quality assessment for electronic components. Varistors for use in electronic equipment: generic specification |
BS 5772-6:1984 | Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods Climatic tests and soldering tests |
BS EN 61249-8-7:1997 | Materials for interconnection structures. Sectional specification set for non-conductive films and coatings Marking legend inks |
BS EN 116205-116206/116207 : 1996 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - BLANK DETAIL SPECIFICATION - HERMETICALLY SEALED RELAYS - FOR SEVERE STATIC ENVIRONMENTAL CONDITIONS (116205) - FOR SEVERE MOBILE ENVIRONMENTAL CONDITIONS (116206) - FOR SEVERE AIRBORNE ENVIRONMENTAL CONDITIONS (116207) |
BS QC 400000:1990 | Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment: generic specification |
BS QC 222000:1996 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling. Characteristic impedance 50 ohms. (Type TNC) |
BS 2816:1989 | Method for specifying electroplated coatings of silver and silver alloys for engineering purposes |
BS 4393:1991 | Specification for solderable tin or tin-lead coated wires for component terminations |
BS 6221-10:1991 | Printed wiring boards Specification for flex-rigid double-sided printed boards with through connections |
BS 6221-20:1984 | Printed wiring boards Guide for the assembly of printed wiring boards |
BS 9600:1983 | Specification for piezoelectric crystal filters of assessed quality: generic data and methods of test |
BS QC 960500:1992 | Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Sectional specification for in-line package switches |
BS EN 140104:1996 | Harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors (Assessment levels SB and SC) |
BS EN 169000:1993 | Harmonized system of quality assessment for electronic components. Generic specification. Quartz crystal controlled oscillators |
BS QC 222400:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 5,6 mm (0,22 in). Characteristic impedance 75 ohms (type 1,6/5,6). Characteristic impedance 50 ohms (type 1,8/5,6) with similar mating dimensions |
BS QC 760000:1990 | Harmonized system of quality assessment for electronic components. Film and hybrid film integrated circuits. Generic specification |
BS 3G 233:1990 | Specification for electric cables for general airframe or equipment interconnect use (135°C), extruded insulation |
BS 9450:1998 | Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures). Generic data and methods of test |
BS QC 221200:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (Type BNC) |
BS QC 160000-1:1987 | Harmonized system of quality assessment for electronic components. Electrical relays. Generic specification: electromechanical all-or-nothing relays Test and measurement procedures |
BS 6201-1:1982 | Fixed capacitors for use in electronic equipment Methods of test |
BS EN ISO 9455-2:1996 | Soft soldering fluxes. Test methods Determination of non-volatile matter, ebulliometric method |
BS CECC 30800:1991 | Harmonized system of quality assessment for electronic components. Sectional specification: tantalum surface mounting capacitors |
BS 5057:1988 | Specification for flat quick-connect terminations |
BS 6221-9:1991 | Printed wiring boards Specification for flexible multilayer boards with through connections |
BS G 235:1987 | Specification for electric cables for general airframe or equipment interconnect use (150°C), wrapped insulation with silver plated conductors |
BS EN 60512-12-6:1997 | Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests Test 12f. Sealing against flux and cleaning solvents in machine soldering |
BS EN 120000:1996 | Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices |
BS EN 129000:1996 | Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors |
BS 2G 230:1991 | Specification for general requirements for aircraft electrical cables (second series) |
BS EN 123700:1997 | Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid double sided printed boards with through connections |
BS 123500-003:2001 | System of quality assessment. Capability detail specification. Flexible Single-sided and double-sided printed boards with through-connections |
BS 1872:1984 | Specification for electroplated coatings of tin |
BS CECC 16000-1:1992 | Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General |
BS 2G 232:1987 | Specification for electric cables for general airframe or equipment interconnect use (135°C), wrapped insulation |
BS QC 300000:1983 | Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Generic specification |
BS 6702:1991 | Specification for lampholders for tubular fluorescent lamps and starterholders |
BS 5267:1976 | Specification. Capacitors for single phase a.c. motors |
BS 6702:1986 | Specification for lampholders for tubular fluorescent lamps and starterholders |
BS 9400:1970 | Specification for integrated electronic circuits and micro-assemblies of assessed quality (qualification approval procedures): generic data and methods of test |
BS 9940-0:1983 | Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment Generic specification |
BS 9500:1990 | Specification for sockets of assessed quality for plug-in electronic components: generic data and methods of test |
BS EN 60249-1:1993 | Base materials for printed circuits Base materials for printed circuits. Test methods |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
BS 2011-2.1B:1977 | Environmental testing. Tests Tests B. Dry Heat |
BS 4597(1970) : LATEST | GENERAL REQUIREMENTS AND METHODS OF TEST FOR MULTILAYER PRINTED WIRING BOARDS USING PLATED THROUGH HOLES |
BS 4025(1966) : LATEST | THE GENERAL REQUIREMENTS AND METHODS OF TEST FOR PRINTED CIRCUITS |
BS 2877(1976) : LATEST | METHOD FOR THE DETERMINATION OF DROPPING POINT OF LUBRICATING GREASE |
BS 2011-2.1Ca:1977 | Environmental testing. Tests Test Ca. Damp heat, steady state |
IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
BS 4584:1970 | Specification for metal clad base materials for printed circuits. Methods of test |
ISO 2176:1995 | Petroleum products — Lubricating grease — Determination of dropping point |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.