BS 1010-2:1973
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Specification for draw-off taps and stopvalves for water services (screw-down pattern) Draw-off taps and above-ground stopvalves
Hardcopy , PDF
24-09-2012
English
17-08-1973
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Co-operating organizations
Foreword
Specification
1. General
1.1 Scope
1.2 Definitions
1.3 Illustrations
1.4 Nominal size
1.5 Dimensions
1.6 Colour coding
1.7 Testing
1.8 Marking
2. Materials
2.1 General
2.2 Composition
3. Workmanship
3.1 Castings
3.2 Hot pressings
3.3 Machining
3.4 Thickness of parts
3.5 Chromium and nickel plating
4. Design and construction
4.1 Waterway
4.2 Seat
4.3 Screw threads
4.4 Head seal
4.5 Washer plate and washer plate unit
4.6 Body, head, cover, spindle and lockshield
4.7 Method of attaching handle
4.8 Clearance between handle and head
4.9 Seat washer
4.10 Gland packing
4.11 Union connections
4.12 Hexagonal shoulders
4.13 Flow-straightening and aerating devices
4.14 Interlock control
4.15 Combination tap assemblies
Appendices
A. Requirements for 'O' rings
B. Method for the determination of low temperature
flexibility of 'O' rings
C. Method for the determination of adhesion to, and
corrosion of, metals by 'O' rings
D. Properties of lubricating oil for tests for 'O'
ring material in Appendix A
E. Method for the determination of surface condition
of 'O' ring material on bending after ageing in
air
Dimensions, test requirements for screw-down pattern draw-off taps and above-ground stopvalves ¼ in to 2 in nominal sizes. Material (mainly metal), design, dimensions of components and union ends.
| Committee |
B/504
|
| DevelopmentNote |
Inactive for the new design. (09/2007)
|
| DocumentType |
Standard
|
| Pages |
86
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| BS 3456-102.21:1988 | Specification for safety of household and similar electrical appliances. Particular requirements Storage water heaters |
| BS 1206:1974 | Specification for fireclay sinks: dimensions and workmanship |
| 11/30228295 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING, OPERATION AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
| BS 5412-5:1976 | Specification for the performance of draw-off taps with metal bodies for water services Physio-chemical characteristics: materials, coatings |
| BS 6465-1:1984 | Sanitary installations. Code of practice for scale of provision, selection and installation of sanitary appliances |
| BS 5412&5413-3(1976) : AMD 3156 | SPECIFICATION FOR THE PERFORMANCE OF DRAW-OFF TAPS WITH METAL BODIES FOR WATER SERVICES - HYDRAULIC CHARACTERISTICS |
| BS 5412-3:1976 | Specification for the performance of draw-off taps with metal bodies for water services Hydraulic characteristics |
| BS 6340-4:1984 | Shower units Specification for shower heads and related equipment |
| BS 8558:2015 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| BS 5412-1:1976 | Specification for the performance of draw-off taps with metal bodies for water services Dimensional and design characteristics |
| BS 5274:1985 | Specification for fire hose reels (water) for fixed installations |
| BS 5546:2010 | Specification for installation and maintenance of gas-fired water-heating appliances of rated input not exceeding 70 kW net |
| BS 5412&5413-2(1976) : AMD 3155 | SPECIFICATION FOR THE PERFORMANCE OF DRAW-OFF TAPS WITH METAL BODIES FOR WATER SERVICES - WATER TIGHTNESS AND PRESSURE RESISTANCE CHARACTERISTICS |
| BS 2580:1979 | Specification for underground plug cocks for cold water services |
| BS 5412-2:1976 | Specification for the performance of draw-off taps with metal bodies for water services Water tightness and pressure resistance characteristics |
| BS 5546:1990 | Specification for installation of gas hot water supplies for domestic purposes (1st, 2nd and 3rd family gases) |
| BS 5306-2:1990 | Fire extinguishing installations and equipment on premises Specification for sprinkler systems |
| BS 5546:2000 | Specification for installation of hot water supplies for domestic purposes, using gas-fired appliances of rated input not exceeding 70 kW |
| BS 864-2:1983 | Capillary and compression tube fittings of copper and copper alloy Specification for capillary and compression fittings for copper tubes |
| BS 6700:1997 | Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages |
| BS 5546:1979 | Code of practice for installation of gas hot water supplies for domestic purposes (2nd family gases) |
| BS 6700(2006) : 2006 | DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - SPECIFICATION |
| ESI 41-23 : ISSUE 1 | METAL ENCLOSED AUTOMATIC FUSE SWITCH EQUIPMENT ( RATINGS 12.5, 16 AND 20 KA AT 7.2 KV AND 12KV) |
| BS 5412&5413-1(1976) : AMD 4593 | SPECIFICATION FOR THE PERFORMANCE OF DRAW OFF TAPS WITH METAL BODIES FOR WATER SERVICES - DIMENSIONAL AND DESIGN CHARACTERISTICS |
| BS 5412-4:1976 | Specification for the performance of draw-off taps with metal bodies for water services Mechanical and endurance characteristics |
| BS 6675:1986 | Specification for servicing valves (copper alloy) for water services |
| BS 8558:2011 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| BS 5502-25:1991 | Buildings and structures for agriculture Code of practice for design and installation of services and facilities |
| BS 5433:1976 | Specification for underground stopvalves for water services |
| BS 5412&5413-5(1976) : AMD 4591 | SPECIFICATION FOR THE PERFORMANCE OF DRAW-OFF TAPS WITH METAL BODIES FOR WATER SERVICES - PHYSIO-CHEMICAL CHARACTERISTICS MATERIALS COATINGS |
| BS 1415-1:1976 | Mixing valves Non-thermostatic, non-compensating mixing valves |
| 09/30166542 DC : 0 | BS 5546 - SPECIFICATION FOR INSTALLATION AND MAINTENANCE OF GAS-FIRED WATER-HEATING APPLIANCES OF RATED INPUT NOT EXCEEDING 70 KW NET |
| BS 5779:1979 | Specification for spray mixing taps |
| 15/30299694 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
| BS 2745-1:1993 | Washer-disinfectors for medical purposes Specification for general requirements |
| BS 5412&5413-4(1976) : AMD 3714 | SPECIFICATION FOR THE PERFORMANCE OF DRAW-OFF TAPS WITH METAL BODIES FOR WATER SERVICES - MECHANICAL AND ENDURANCE CHARACTERISTICS |
| BS PAS 33(1999) : 1999 | SPECIFICATION FOR THE DESIGN, INSTALLATION AND COMMISSIONING OF GAS FIRED CENTRAL HEATING SYSTEMS IN DOMESTIC PREMISES |
| BS 3284:1967 | Specification for polythene pipe (Type 50) for cold water services |
| BS 57:1951 | Specification. B.A. screws bolts and nuts |
| BS 61:1969 | Specification for threads for light gauge copper tubes and fittings |
| BS 1737(1951) : LATEST | JOINTING MATERIALS AND COMPOUNDS FOR WATER, TOWN GAS AND LOW-PRESSURE STEAM INSTALLATIONS |
| BS 1083:1965 | Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads) |
| BS 2871-1:1971 | Specification for copper and copper alloys. Tubes Copper tubes for water, gas and sanitation |
| BS 1449-4(1967) : LATEST | STEEL PLATE, SHEET AND STRIP |
| BS 3964:1980 | Specification for flexible vulcanized fibre sheets |
| BS 1224:1970 | Specification for electroplated coatings of nickel and chromium |
| BS 3457:1973 | Specification for materials for water tap and stopvalve seat washers |
| BS 84:1956 | Specification for parallel screw threads of Whitworth form |
| ISO 228-2:1987 | Pipe threads where pressure-tight joints are not made on the threads Part 2: Verification by means of limit gauges |
| BS 864-3:1975 | Capillary and compression tube fittings of copper and copper alloy Compression fittings for polyethylene pipes |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| BS 3885:1965 | Tolerances for hot brass stampings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.