BIS IS/IEC 60947-2 : 2003
Current
The latest, up-to-date edition.
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT BREAKERS
12-01-2013
NATIONAL FOREWORD
1 General
2 Definitions
3 Classification
4 Characteristics of circuit-breakers
5 Product information
6 Normal service, mounting and transport conditions
7 Constructional and performance requirements
8 Tests
Annex A (normative) - Co-ordination under short-circuit
conditions between a circuit-breaker and another
short-circuit protective device associated in the
same circuit
Annex B (normative) - Circuit-breakers incorporating residual
current protection
Annex C (normative) - Individual pole short-circuit test
sequence
Annex D - Vacant
Annex E (informative) - Items subject to agreement between
manufacturer and user
Annex F (normative) - Additional tests for circuit-breakers
with electronic over-current protection
Annex G (normative) - Power loss
Annex H (normative) - Test sequence for circuit-breakers for
IT systems
Annex J (normative) - Electromagnetic compatibility (EMC) -
Requirements and test methods for circuit-breakers
Annex K (informative) - Glossary of symbols related to
products covered by this standard
Annex L (normative) - Circuit-breakers not fulfilling the
requirements for overcurrent protection
Annex M (normative) - Modular residual current devices
(without integral current breaking device)
Annex N (normative) - Electromagnetic compatibility (EMC) -
Additional requirements and test methods for devices
not covered by Annexes B, F and M
Alphabetical index of tests
Pertains to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c. it also contains additional requirements for integrally fused circuit-breakers.
| Committee |
ETD 7
|
| DevelopmentNote |
Supersedes BIS IS 13947-2. (09/2008) Issued: December 2007. (05/2016) NEW CHILD AMD 1 2023 IS ADDED
|
| DocumentType |
Standard
|
| ProductNote |
NEW CHILD AMD 1 2023 IS ADDED
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| Supersedes |
| BIS IS/IEC 60898-1 : 2002 | ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR AC OPERATION |
| BIS IS/IEC 60947-3 : 1999 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE COMBINATION UNITS |
| BIS IS/IEC 60947-4-1 : 2000 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| BIS IS/IEC 60947-4-1 : 2000 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| BIS IS 14700-3-2 : 1999(R2003) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3: LIMITS - SECTION 2: LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT 16 A PER PHASE) |
| BIS IS 9000-14-1 TO 3 : 1988(R2015) | BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC AND ELECTRICAL ITEMS - PART 14: TEST N: CHANGE OF TEMP |
| IEC 60898:1995 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 60934:2000+AMD1:2007+AMD2:2013 CSV | Circuit-breakers for equipment (CBE) |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
| IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules |
| BIS SP 30 : 2011(R2016) | NATIONAL ELECTRICAL CODE |
| BIS IS 14700-4-2 : 1999(R2003) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 2: ELECTROSTATIC DISCHARGE IMMUNITY TEST |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| BIS IS 14700-4-3 : 2008 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 3: RADIATED, RADIO FREQUENCY, ELETROMAGNETIC FIELD IMMUNITY TEST |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| BIS IS 8828 : 1996(R2006) | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS |
| BIS IS 9000-5-1&2 : 1981(R2004) | BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC AND ELECTRICAL ITEMS - PART 5: DAMP HEAT (CYCLIC) TEST |
| IEC TR 61000-5-2:1997 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling |
| IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| BIS IS 12640-1 : 2008 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS FOR HOUSEHOLD AND SIMILAR USES - PART 1: CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION (RCCBS) |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| BIS IS 14700-4-4 : 1999(R2003) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 4: ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
| BIS IS 14700-3-3 : 2008 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3: LIMITS - SECTION 3: LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| IEC 60755:2017 | General safety requirements for residual current operated protective devices |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| BIS IS 1885-17 : 1979(R2017) | ELECTROTECHNICAL VOCABULARY - PART 17: SWITCHGEAR AND CONTROLGEAR |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| BIS IS 12640-2 : 2008 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKING FOR HOUSEHOLD AND SIMILAR USES - PART 2: CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION (RCBOS) |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| BIS IS 6873-4 : 1999(R2003) | LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS - PART 4: INDUSTRIAL, SCIENTIFIC AND MEDICAL (ISM) RADIO-FREQUENCY EQUIPMENT |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| BIS IS/IEC 60947-1 : 2007(R2017) | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| BIS IS 6873-7 : 2012 | LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS - PART 7: INFORMATION TECHNOLOGY EQUIPMENT |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.