BIS IS 1030 : 1998
Current
The latest, up-to-date edition.
CARBON STEEL CASTINGS FOR GENERAL ENGINEERING PURPOSES - SPECIFICATION
12-01-2013
1 SCOPE
2 REFERENCES
3 TERMINOLOGY
4 GRADES
5 SUPPLY OF MATERIAL
6 MANUFACTURE
7 PARTICULARS TO BE SPECIFIED WHILE ORDERING
8 CHEMICAL COMPOSITION
9 WORKMANSHIP AND FINISH
10 FREEDOM FROM DEFECTS
11 FETTLING AND DRESSING
12 HEAT TREATMENT
13 MECHANICAL TESTS
14 NON-DESTRUCTIVE TESTS
15 REPAIR OF CASTINGS
16 HYDRAULIC TEST
17 METHOD OF SAMPLING
18 MARKING
ANNEX A - LIST OF REFERRED INDIAN STANDARDS
ANNEX B - INFORMATION TO BE SUPPLIED BY THE PURCHASER
Specifies the requirements for carbon steel castings for general purposes.
| Committee |
MTD 17
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| BIS IS 10386-11 : 2012 | SAFETY CODE FOR CONSTRUCTION, OPERATION AND MAINTENANCE OF RIVER VALLEY PROJECTS - PART 11: UNDERGROUND EXCAVATION |
| BIS IS 9338 : 2013 | CAST IRON/S.G. IRON/CAST STEEL SCREW-DOWN STOP VALVES FOR WATER WORKS PURPOSES - SPECIFICATION |
| BIS IS 5312-1 : 2004(R2009) | SWING CHECK TYPE REFLUX (NON-RETURN) VALVES FOR WATER WORKS PURPOSES - SPECIFICATION - PART 1: SINGLE-DOOR PATTERN |
| BIS IS 8800 : 1997 AMD 1 2009 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS (EXCLUDING INVESTMENT CASTINGS) |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BIS IS 5290 : 1993(R2008) | LANDING VALVES - SPECIFICATION |
| BIS IS 16045 : 2013 | COPPER ALLOY SCREW - DOWN STOP VALVES AND STOP AND CHECK VALVES FOR MARINE APPLICATION - SPECIFICATION |
| BIS IS 15998 : 2013 | CAST IRON, SPHEROIDAL/NODULAR CAST IRON AND CAST STEEL SCREW-DOWN STOP VALVES AND STOP AND CHECK VALVES FOR MARINE APPLICATIONS - SPECIFICATION |
| BIS IS 3177 : 1999(R2004) | CODE OF PRACTICE FOR ELECTRIC OVERHEAD TRAVELLING CRANES AND GANTRY CRANES OTHER THAN STEEL WORK CRANES |
| BIS IS 6533-2 : 1989(R2003) | CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF STEEL CHIMNEY - PART 2: STRUCTURAL ASPECT |
| BIS IS 14846 : 2000 AMD 3 2010 | SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) - SPECIFICATION |
| BIS IS 5530 : 1987(R1998) | RECOMMENDATIONS FOR PRODUCTION, RECTIFICATION AND REPAIR OF STEEL CASTINGS BY METAL ARC WELDING PROCESS |
| BIS IS 11732 : 1995(R2005) | ACCEPTANCE STANDARDS FOR DYE PENETRANT INSPECTION OF STEEL CASTINGS |
| BIS IS 10724 : 1990(R2005) | ACCEPTANCE STANDARD FOR MAGNETIC PARTICLE TESTING OF STEEL CASTING |
| BIS IS 3658 : 1999(R2005) | CODE OF PRACTICE FOR LIQUID PENETRANT FLAW DETECTION |
| BIS IS 12938 : 1990(R2005) | ACCEPTANCE STANDARDS FOR RADIOGRAPHIC INSPECTION OF STEEL CASTINGS |
| BIS IS 1757 : 1988(R2009) | METHOD FOR CHARPY IMPACT TEST (V-NOTCH) FOR METALLIC MATERIAL |
| BIS IS 6601 : 1987(R1996) | PERMISSIBLE DEVIATION IN CHEMICAL COMPOSITION FOR PRODUCTS ANALYSIS OF STEEL |
| BIS IS 1500 : 2005 | METHOD FOR BRINELL HARDNESS TEST FOR METALLIC MATERIALS |
| BIS IS 3703 : 2004 | RECOMMENDED PRACTICE FOR MAGNETIC PARTICLE FLAW DETECTION |
| BIS IS 8800 : 1997 AMD 1 2009 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS (EXCLUDING INVESTMENT CASTINGS) |
| BIS IS 228 : 1959 | METHODS OF CHEMICAL ANALYSIS OF PIG IRON, CAST IRON AND PLAIN CARBON AND LOW ALLOY STEEL |
| BIS IS 2595 : 2008 | INDUSTRIAL RADIOGRAPHIC TESTING - CODE OF PRACTICE |
| BIS IS 1599 : 2012(R2017) | METALLIC MATERIALS - BEND TEST |
| BIS IS 6907 : 1992(R2002) | METHOD OF SAMPLING STEEL CASTINGS |
| BIS IS 9565 : 1995(R2005) | ACCEPTANCE STANDARDS FOR ULTRASONIC INSPECTION OF STEEL CASTINGS |
| BIS IS 1608 : 2005 | METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE |
| BIS IS 4897 : 1994(R2004) | DEVIATIONS ON UNTOLERANCED DIMENSIONS AND MASS OF STEEL CASTINGS |
| BIS IS 7666 : 1988(R2005) | ULTRASONIC EXAMINATION OF FERRITIC CASTINGS OF CARBON AND LOW ALLOY STEEL - RECOMMENDED PROCEDURE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.