ASTM G 3 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
Available format(s)
Hardcopy , PDF
Superseded date
20-05-2024
Superseded by
Language(s)
English
Published date
15-12-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.This practice covers conventions for reporting and displaying electrochemical corrosion data.
| Committee |
G 01
|
| DocumentType |
Standard Practice
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers conventions for reporting and displaying electrochemical corrosion data. Conventions for potential, current density, electrochemical impedance and admittance, as well as conventions for graphical presentation of such data are included.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. See also 7.4.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| NACE SP 02 90 : 2007 | IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
| ASTM F 1113 : 1987 : R2005 : EDT 1 | Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode) |
| ASTM F 746 : 2004 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| ASTM G 96 : 1990 : R1996 : EDT 1 | Standard Guide for On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| BS EN ISO 11846:2008 | Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys |
| ASTM G 215 : 2017 : REDLINE | Standard Guide for Electrode Potential Measurement |
| NACE SP 01 07 : 2017 | ELECTROCHEMICAL REALKALIZATION AND CHLORIDE EXTRACTION FOR REINFORCED CONCRETE |
| ASTM G 116 : 1999 | Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion |
| ASTM G 162 : 1999 : R2004 | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| ASTM G 61 : 1986 : R2003 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| NACE SP 01 00 : 2014 | CATHODIC PROTECTION TO CONTROL EXTERNAL CORROSION OF CONCRETE PRESSURE PIPELINES AND MORTAR-COATED STEEL PIPELINES FOR WATER OR WASTE WATER SERVICE |
| ASTM G 150 : 2013 | Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels |
| ASTM G 200 : 2009 : R2014 | Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil |
| ASTM F 746 : 2004 : R2014 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| ASTM G 59 : 1997 : EDT 1 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM F 2660 : 2013 : REDLINE | Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement |
| ASTM G 185 : 2006 : R2016 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM F 1113 : 1987 : R2017 | Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode) |
| ASTM G 199:2009 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 82 : 1998 : R2014 | Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance |
| ASTM G 61 : 1986 : R2014 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| ASTM G 59 : 1997 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM G 170 :2006 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM F 1113 : 1987 : R1999 | Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode) |
| ASTM F 1875 : 1998 : R2004 | Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface |
| ASTM D 6208 : 2007 : R2014 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM G 71 : 1981 | GUIDE FOR CONDUCTING AND EVALUATING GALVANIC CORROSION TESTS IN ELECTROLYTES |
| ASTM G 162 : 1999 | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| 98/705334 DC : DRAFT MAR 1998 | ISO/CD 12732 - METHOD FOR ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION TEST (BASED ON CIHAL'S METHOD) |
| ASTM F 1113 : 1987 : R2011 | Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode) |
| ASTM G 71 : 1981 : R2003 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM G 106 : 1989 : R2015 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM G 162 : 1999 : R2010 | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| ASTM G 71 : 1981 : R1998 : EDT 1 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| NACE SP 04 08 : 2014 | CATHODIC PROTECTION OF REINFORCING STEEL IN BURIED OR SUBMERGED CONCRETE STRUCTURES |
| ASTM G 59 : 1997 : R2009 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM F 1875 : 1998 : R2014 | Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface |
| ASTM G 111 : 1997 : R2013 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 97 : 1997 : R2007 | Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications |
| ASTM C 876 : 2015 : REDLINE | Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete |
| ASTM G 116 : 1999 : R2010 | Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion |
| ASTM G 189:2007 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM D 6208 : 2007 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM F 1875 : 1998 | Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface |
| BS ISO 11846 : 1995 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF SOLUTION HEAT-TREATABLE ALUMINIUM ALLOYS |
| ASTM G 199 : 2009 : R2014 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 109 : 2007 : R2013 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| ASTM G 108 : 1994 : R1999 | Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels |
| ASTM G 108 : 1994 : R2010 | Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels |
| ASTM G 170 : 2006 : R2012 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM G 96 : 1990 : R2001 : EDT 1 | Standard Guide for On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM G 106 : 1989 : R1999 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| NACE RP 02 90 : 0 | IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
| I.S. EN ISO 11846:2008 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF SOLUTION HEAT-TREATABLE ALUMINIUM ALLOYS |
| NACE SP 03 08 : 2008(R2018) | INSPECTION METHODS FOR CORROSION EVALUATION OF CONVENTIONALLY REINFORCED CONCRETE STRUCTURES |
| ASTM G 149 : 1997 | Standard Practice for Conducting the Washer Test for Atmospheric Galvanic Corrosion (Withdrawn 2004) |
| ASTM G 108 : 1994 : R2004 : EDT 1 | Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels |
| ASTM G 82:1998 | Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance |
| ASTM G 96 : 1990 : R2013 | Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM G 108 : 1994 : R2015 | Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels |
| ISO 11846:1995 | Corrosion of metals and alloys Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys |
| UNI EN ISO 11846 : 2008 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF SOLUTION HEAT-TREATABLE ALUMINIUM ALLOYS |
| ASTM G 108 : 1994 : R2004 | Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels |
| NACE 11100 : 2000(R2018) | USE OF REFERENCE ELECTRODES FOR ATMOSPHERICALLY EXPOSED REINFORCED CONCRETE STRUCTURES |
| BS ISO 17474:2012 | Corrosion of metals and alloys. Conventions applicable to electrochemical measurements in corrosion testing |
| SAE CRP-4 : 1992 | RECOMMENDED METHODS FOR CONDUCTING CORROSION TESTS IN GASOLINE/METHANOL FUEL MIXTURES |
| ASTM G 111 : 1997 : R2006 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 116 : 1999 : R2004 | Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion |
| ASTM G 97 : 1997 : R2013 | Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications |
| ASTM G 200 : 2009 | Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil |
| ASTM F 1875 : 1998 : R2009 | Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface |
| ASTM G 71 : 1981 : R2009 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM G 119 : 2009 : R2016 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM G 119 : 2009 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM G 109 : 2007 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| ASTM G 96 : 1990 : R2008 | Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM G 111 : 1997 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 69 : 2012 : REDLINE | Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys |
| NACE 31014 : 0 | FIELD MONITORING OF CORROSION RATES IN OIL AND GAS PRODUCTION ENVIRONMENTS USING ELECTROCHEMICAL TECHNIQUES |
| EN ISO 11846:2008 | Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995) |
| ASTM G 106 : 1989 : R2010 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM G 61 : 1986 : R2009 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| ASTM G 97 : 1997 | Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications |
| ASTM G 189 : 2007 : R2013 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM G 71 : 1981 : R2014 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ISO 16429:2004 | Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods |
| ASTM G 61 : 1986 : R1998 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| ISO 17474:2012 | Corrosion of metals and alloys — Conventions applicable to electrochemical measurements in corrosion testing |
| AASHTO T 373M/T 373 : 2017 | METHOD OF TEST FOR COMPARATIVE QUALITATIVE CORROSION CHARACTERIZATION OF STEEL BARS USED FOR CONCRETE REINFORCEMENT (LINEAR POLARIZATION RESISTANCE AND POTENTIODYNAMIC POLARIZATION TESTS) |
| ASTM G 111 : 1997 : R2018 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 185 : 2006 : R2012 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM F 746 : 2004 : R2009 : EDT 1 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| NACE RP 01 00 : 2004 | CATHODIC PROTECTION OF PRESTRESSED CONCRETE CYLINDER PIPELINES |
| ASTM A 955/A 955M : 2018-02 | SPECIFICATION FOR DEFORMED AND PLAIN STAINLESS-STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM G 116 : 1999 : R2015 | Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion |
| ASTM F 3268 : 2018 | Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals |
| ASTM G 185 :2006 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 106 : 1989 : R2004 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM G 97 : 1997 : R2002 : EDT 1 | Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications |
| ASTM G 59 : 1997 : R2014 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM F 3044 : 2014 | Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| ASTM G 82 : 1998 : R2009 | Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance |
| ASTM G 180 : 2013 : REDLINE | TEST METHOD FOR CORROSION INHIBITING ADMIXTURES FOR STEEL IN CONCRETE BY POLARIZATION RESISTANCE IN CEMENTITIOUS SLURRIES |
| ASTM G 61 : 1986 : R2003 : EDT 1 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| ASTM G 59 : 1997 : R2003 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| DIN EN ISO 11846:2008-08 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF SOLUTION HEAT-TREATABLE ALUMINIUM ALLOYS |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.