ASTM F 2493 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
Hardcopy , PDF
18-10-2019
English
01-01-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
F 09
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the general requirements for the P225/60R16 97S radial standard reference test tire. The tire covered by this specification is primarily for use as a reference tire for braking traction, snow traction, and wear performance evaluations, but may also be used for other evaluations, such as pavement roughness, noise, or other tests that require a reference tire.
1.1.1Other standard reference test tires are also used for these purposes and are referenced in Section 2.
1.2This specification provides a rim code diameter of 16 standard tire design and construction, standard dimensions, and specifies the conditions of storage.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 2872 : 2019 | Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire |
| ASTM E 1136 : 2019 | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
| ASTM F 2870 : 2019 | Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire |
| ASTM E 1136 : 2017 | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
| ASTM F 2872 : 2016 | Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire |
| ASTM F 1805 : 2018 | Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces |
| ASTM F 1649 : 2013 | Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems |
| ASTM F 2870 : 2016 | Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire |
| ASTM F 2871 : 2016 | Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire |
| ASTM F 1806 : 2014 | Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use |
| ASTM E 1136 : 1993 : R2003 | Standard Specification for A Radial Standard Reference Test Tire |
| ASTM D 2240 : 2000 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3182 : 2015 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM E 1136 : 1993 : R1998 | Standard Specification for A Radial Standard Reference Test Tire |
| ASTM D 3182 : 2007 : R2012 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM F 2872 : 2016 | Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire |
| ASTM F 2870 : 2016 | Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire |
| ASTM D 3182 : 1989 : R2006 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2240 : 2004 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM E 1136 : 2010 | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
| ASTM D 3182 : 1989 : R2001 : EDT 1 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM F 2871 : 2011 | Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire |
| ASTM D 2240 : 2004 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM F 2870 : 2011 | Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire |
| ASTM E 1136 : 2017 | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
| ASTM D 3182 : 2007 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM F 2872 : 2011 | Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire |
| ASTM D 2240 : 2002 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 2240 : 2015 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 2240 : 2003 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM F 2871 : 2016 | Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire |
| ASTM D 2240 : 2002 : REV B | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3182 : 1989 : R2001 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 2240 : 2005 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3182 : 1989 : R1994 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2240 : 2005 : R2010 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3182 : 2016 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2240 : 2002 : REV A | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM E 1136 : 2014 | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
| ASTM D 3182 : 2015 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.