ASTM F 2431 : 2004 : R2018
Current
The latest, up-to-date edition.
Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
Hardcopy , PDF
English
15-08-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 01.09, 2018 Describes inner rings for needle roller bearings having thick outer rings.
| Committee |
F 34
|
| DevelopmentNote |
Supersedes MS 51962 (F) (04/2006)
|
| DocumentType |
Standard
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2004 This standard also refers MIL STD 197
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers inner rings for needle roller bearings having thick outer rings.
1.2The inner rings being specified are intended for use on unhardened shafts in conjunction with the MS51961 needle roller bearings specified in Specification F2246.
1.2.1For needle roller bearings with thin outer rings (Specification F2162, MS17131, MS52141) use inner rings specified in Specification F2163.
1.3Inner rings designed to this specification are intended for use in applications requiring high radial load with minimal angular shaft misalignment.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This specification contains many of the requirements of MS51962, which was originally developed by the Department of Defense and maintained by the Defense Supply Center in Richmond. The following government activity codes may be found in the Department of Defense, Standardization Directory SD-1.2
| Preparing activity | Custodians | Review Activity |
| DLA–GS4 | Army –AT | Air Force–84 |
| Navy–OS | ||
| Air Force–-99 |
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 2430 : 2004 : R2018 | Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race) |
| ASTM F 2246 : 2006 : R2013 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
| ASTM F 2162 : 2001 : R2008 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| ASTM E 18 : 2024 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM F 2246 : 2006 : EDT 1 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| ASTM F 2162 : 2001 : EDT 2 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| ASTM E 18 : 2022 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM F 2246 : 2006 : R2013 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
| ISO 5593:1997 | Rolling bearings Vocabulary |
| ASTM E 18 : 2020 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM F 2163 : 2001 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| ASTM F 2163 : 2001 : EDT 1 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
| SAE AMS STD 66 : 1998 | STEEL: CHEMICAL COMPOSITION AND HARDENABILITY |
| ASTM F 2163 : 2001 : R2016 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
| ASTM F 2246 : 2003 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
| ASTM F 2163 : 2001 : R2008 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
| ASTM F 2246 : 2006 : R2022 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
| ASTM F 2246 : 2006 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
| ASTM F 2162 : 2001 : R2016 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| ASTM E 18 : 2019 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM F 2162 : 2001 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| ASTM F 2162 : 2001 : EDT 1 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
| SAE J 404 : 2009 | CHEMICAL COMPOSITIONS OF SAE ALLOY STEELS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.