ASTM F 2282 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
Hardcopy , PDF
18-11-2023
English
24-05-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1.1This specification establishes quality assurance requirements for the physical, mechanical, and metallurgical requirements for carbon and alloy steel wire, rods, and bars in coils intended for the manufacture of mechanical fasteners which includes: bolts, nuts, rivets, screws, washers, and special parts manufactured cold.
| Committee |
F 16
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification establishes quality assurance requirements for the physical, mechanical, and metallurgical requirements for carbon and alloy steel wire, rods, and bars in coils intended for the manufacture of mechanical fasteners which includes: bolts, nuts, rivets, screws, washers, and special parts manufactured cold.
Note 1:The Steel Industry uses the term “quality” to designate characteristics of a material which make it particularly well suited to a specific fabrication and/or application and does not imply “quality” in the usual sense.
1.2Wire size range includes 0.062 to 1.375 in.
1.3Rod size range usually includes 7/32in. (0.219) to 47/64in. (0.734) and generally offered in 1/64increments (0.0156).
1.4Bar size range includes 3/8in. (0.375) to 11/2in. (1.500).
1.5Sizes for wire, rod and bar outside the ranges of paragraphs 1.2 – 1.4 may be ordered by agreement between purchaser and supplier.
1.6Material is furnished in many application variations. The purchaser should advise the supplier regarding the manufacturing process and finished product application as appropriate. Five application variations are:
| Cold Heading |
| Recessed Head |
| Socket Head |
| Scrapless Nut |
| Tubular Rivet |
1.6.1Wire is furnished for all five application variations.
1.6.2Rod and bar are furnished to the single application variation; Cold Heading.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A 574 : 2021 | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| ASTM A 574 : 2017 | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| ASTM F 2882/F2882M : 2017 | Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric) |
| ASTM A 370 : 2021 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM F 1789 : 2014 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2016 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1470 : 2012 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 1789 : 2017 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2006 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 1077 : 2014 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 1077 : 2014 : R2021 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM F 1789 : 2001 : REV A | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1470 : 2002 | Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 1789 : 2017 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2012 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2001 : REV B | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1789 : 2005 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2022 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1470 : 2009 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 1789 : 2003 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2006 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 10 : 2023 | Standard Test Method for Brinell Hardness of Metallic Materials |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM F 1789 : 2014 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 10 : 2001 | Standard Test Method for Brinell Hardness of Metallic Materials |
| ASTM F 1789 : 2002 : REV A | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1789 : 2009 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2006 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2004 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 1077 : 1991 : R1997 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM F 1789 : 2007 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2007 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2015 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2002 : REV B | Standard Terminology of F16 Mechanical Fasteners |
| ASTM A 751 : 2021 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| ASTM A 370 : 2020 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM F 1789 : 2010 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM A 370 : 2023 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM F 1789 : 2012 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2005 : REV D | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2017 : REV A : EDT 1 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2010 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2010 : REV A : EDT 1 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2015 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 1077 : 2001 : EDT 1 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM A 751 : 2020 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM A 370 : 2011 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM F 1789 : 2000 : REV A | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1470 : 2018 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 1789 : 2007 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2011 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1470 : 2001 | Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM E 381 : 2022 | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| ASTM F 1789 : 2004 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 1077 : 2001 : R2005 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM F 1789 : 2005 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 1077 : 2001 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM A 370 : 2022 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM F 1470 : 2019 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM A 29/A29M : 2023 | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASTM F 1789 : 2008 : REV D | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 112 : 2013 : R2021 | Standard Test Methods for Determining Average Grain Size |
| ASTM E 112 : 2013 | Standard Test Methods for Determining Average Grain Size |
| ASTM F 1789 : 2007 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2011 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 381 : 2020 | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| ASTM A 29/A29M : 2020 | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASTM F 1789 : 2005 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM E 10 : 2018 | Standard Test Method for Brinell Hardness of Metallic Materials |
| ASTM F 1789 : 2002 | Standard Terminology of F16 Mechanical Fasteners |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.