ASTM F 1602 : 2012 : R2017
Current
The latest, up-to-date edition.
Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
Hardcopy , PDF
English
22-12-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 15.12, 2017 Specifies jacketed kettles that use steam as a heat source for cooking food in institutional and commercial food service establishments.
| Committee |
F 26
|
| DevelopmentNote |
Supersedes A A 52145. (07/2003) Supersedes MIL K 43359 (E). (09/2004)
|
| DocumentType |
Standard
|
| Pages |
7
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
1.1This specification covers jacketed kettles that use steam as a heat source for cooking food in commercial and institutional food service establishments. This specification does not cover equipment used by food processors who normally package the food that they cook.
1.2The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 1785 : 1997 : R2020 | Standard Test Method for Performance of Steam Kettles |
| ASTM F 1785 : 1997 : R2015 | Standard Test Method for Performance of Steam Kettles |
| ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
| ASTM A 240/A240M : 2011 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| ASTM F 1785 : 1997 : R2003 | Standard Test Method for Performance of Steam Kettles |
| ASTM F 1785 : 1997 : R2015 | Standard Test Method for Performance of Steam Kettles |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASTM A 240/A240M : 2005 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM F 1166 : 2021 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities<rangeref></rangeref > |
| ASTM F 1785 : 1997 : R2008 | Standard Test Method for Performance of Steam Kettles |
| ASTM B 456 : 2017 : REDLINE | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| ASTM B 456 : 2017 : R2022 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
| ASME PV CODE 4 : 2017 | BPVC Section IV-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF HEATING BOILERS |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM A 240/A240M : 2022 : REV B | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 240/A240M : 2022 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM F 1166 : 1995 : REV A : R2006 | Standard Practice for Human Engineering Design for Marine Systems, Equipment and Facilities |
| NSF 4 : 2016 | COMMERCIAL COOKING, RETHERMALIZATION, AND POWERED HOT FOOD HOLDING AND TRANSPORTATION EQUIPMENT |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| MIL-STD-1399-300 Revision B:2008 | ELECTRIC POWER, ALTERNATING CURRENT |
| ASTM F 1166 : 2007 : R2013 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities |
| ASTM A 240/A240M : 2022 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 240/A240M : 2020 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 580/A580M : 2018 | Standard Specification for Stainless Steel Wire |
| ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| ASTM F 1785 : 1997 : R2003 : EDT 1 | Standard Test Method for Performance of Steam Kettles |
| ASTM F 1166 : 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| ASTM B 456 : 2017 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium |
| ASTM F 1166 : 1995 : REV A : R2000 | Standard Practice for Human Engineering Design for Marine Systems, Equipment and Facilities |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| ASTM A 285/A285M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
| ASTM F 1785:1997 | Standard Test Method for Performance of Steam Kettles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.