ASTM F 139 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
Hardcopy , PDF
27-05-2020
English
01-10-2012
CONTAINED IN VOL. 13.01, 2015 Describes the chemical, mechanical, and metallurgical requirements for wrought 18chromium-14nickel-2.5molybdenum stainless steel sheet and strip used for the manufacture of surgical implants.
| Committee |
F 04
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought 18chromium-14nickel-2.5molybdenum stainless steel sheet and strip used for the manufacture of surgical implants.
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
| 15/30310217 DC : 0 | BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL |
| ASTM F 452 : 1976 : R2008 | Standard Specification for Preformed Cranioplasty Plates |
| ASTM F 2027 : 2016 : REDLINE | Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
| BS ISO 5832-1:2007 | Implants for surgery. Metallic materials Wrought stainless steel |
| ASTM F 1542 : 1994 : R2000 | Standard Specification for the Requirements and Disclosure of Self-Closing Aneurysm Clips (Withdrawn 2009) |
| ASTM F 452 : 1976 : R2014 | Standard Specification for Preformed Cranioplasty Plates |
| ASTM F 982 : 1986 : R2002 | Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion |
| ASTM F 452 : 1976 : R2002 | Standard Specification for Preformed Cranioplasty Plates |
| ASTM F 352 : 1971 : R1987 | Specification for Lock Washers Made From Stainless Steel (Withdrawn 1993) |
| ASTM F 384 : 2017 : REDLINE | Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices |
| ASTM F 345 : 1971 : R1987 | Specification for Counterbored Hex-Head Bolts (McLaughlin Type) Made From Stainless Steel (Withdrawn 1993) |
| ASTM F 2257 : 2014 : REDLINE | Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
| ASTM F 339 : 1971 | SPECIFICATION FOR CLOVERLEAF INTRAMEDULLARY PINS |
| ASTM F 344 : 1971 : R1987 | Specification for Counterbored Hex-Head Bolts (Thornton Type) Made From Stainless Steel (Withdrawn 1993) |
| ASTM F 982 : 1986 : R1998 | Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion |
| ASTM F 351 : 1971 : R1987 | Specification for Hex-Head Bolts (McLaughlin Type) and Lock Washers Made From Stainless Steel (Withdrawn 1993) |
| ISO 5832-1:2016 | Implants for surgery — Metallic materials — Part 1: Wrought stainless steel |
| ASTM F 350 : 1971 : R1987 | Specification for Hex-Head Bolts (Thornton Type) and Lock Washers Made From Stainless Steel (Withdrawn 1993) |
| ASTM F 452 : 1976 : R1998 | Standard Specification for Preformed Cranioplasty Plates |
| ASTM F 982 : 1986 : R2008 | Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion (Withdrawn 2017) |
| NBR 15676-1 : 2017 | ORTHOPEDIC IMPLANTS - METALLIC BONE PLATES - PART 1: REQUIREMENTS |
| ISO 5832-1:2016 | Implants for surgery — Metallic materials — Part 1: Wrought stainless steel |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM A 480/A480M : 2017-11 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.