ASTM E 976 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
Hardcopy , PDF
06-01-2022
English
30-12-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 07
|
| DocumentType |
Guide
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide defines simple economical procedures for testing or comparing the performance of acoustic emission sensors. These procedures allow the user to check for degradation of a sensor or to select sets of sensors with nearly identical performances. The procedures are not capable of providing an absolute calibration of the sensor nor do they assure transferability of data sets between organizations.
1.2Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM F 2174 : 2002 : R2019 | Standard Practice for Verifying Acoustic Emission Sensor Response |
| ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
| ASTM E 1888/E1888M : 2017 | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
| ASTM E 2076/E2076M : 2015 | Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 1211/E1211M : 2017 | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
| ASTM E 2075/E2075M : 2015 : R2020 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
| ASTM E 1139/E1139M : 2017 | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
| ASTM E 2478 : 2011 : R2016 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
| ASTM E 1419/E1419M : 2015 : REV A : R2020 | Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission |
| ASTM F 1797 : 2018 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks |
| ASTM F 1430/F1430M : 2020 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
| ASTM F 914/F914M : 2020 | Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments |
| ASTM E 2981 : 2021 | Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 1930/E1930M : 2017 | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
| ASTM E 569/E569M : 2020 | Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
| ASTM E 2982 : 2021 | Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 2598/E2598M : 2013 | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
| ASTM E 1932 : 2012 : R2017 | Standard Guide for Acoustic Emission Examination of Small Parts |
| ASTM E 2191/E2191M : 2016 | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
| ASTM E 2533 : 2021 | Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications |
| ASTM E 650/E650M : 2017 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
| ASTM E 2661/E2661M : 2020 : EDT 1 | Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications |
| ASTM E 2907/E2907M : 2013 : R2019 | Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
| ASTM E 1118/E1118M : 2016 : R2020 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 2075 : 2000 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
| ASTM E 2374 : 2016 | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 2374 : 2004 | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 2374 : 2015 | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 2374 : 2010 | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 2075 : 2005 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.