ASTM E 70
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE
Superseded date
12-03-2017
Superseded by
Published date
01-01-2015
CONTAINED IN VOL. 15.05, 2017 Establishes the apparatus and procedures for the electrometric measurement of pH values of aqueous solutions with the glass electrode.
| Committee |
D 16
|
| DocumentType |
Standard
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| O-S-635 Revision E:2007 | SODIUM POLYPHOSPHATES, TECHNICAL |
| ASTM D 5400 : 2015 : REDLINE | Standard Test Methods for Hydroxypropylcellulose |
| ASTM D 461 : 1993 | Standard Test Methods for Felt (Withdrawn 2004) |
| ASTM D 778 : 1997 : R2002 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures) |
| ASTM D 1287 : 2011 : REDLINE | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 1208 : 1996 : R2012 | Standard Test Methods for Common Properties of Certain Pigments |
| ASTM D 4213 : 2008 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 3450 : 2015 : REDLINE | Standard Test Method for Washability Properties of Interior Architectural Coatings |
| ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
| SAE AMS 2821 : 2017 | SALTS, HEAT-TREATING (FOR METALS) |
| MIL-PRF-85570 Revision E:2012 | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
| SAE AMS1435C | Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways |
| ASTM D 1417 : 2016 : REDLINE | Standard Test Methods for Rubber Latices—Synthetic |
| SAE AMSF24610A | Fixant, Hold Down |
| SAE AMS1539 | CLEANING COMPOUND, TERPENE Circuit Board Cleaner |
| SAE AMS1428J | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV |
| MIL-H-22072 Revision C:1984 | HYDRAULIC FLUID, CATAPULT, NATO CODE NUMBER H-579 |
| MIL-C-52947 Revision B:1986 | COAGULANT, WATER TREATMENT: POLYELECTROLYTE, CATIONIC, LIQUID |
| MIL-T-48149 Revision A:1976 | Titanium Dioxide, Dry |
| MIL-C-81947 Revision A:1975 | COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-P-47184 Revision A:1990 | PLATING, NICKEL-TUNGSTEN, ELECTRODEPOSIT ON ALUMINUM ALLOYS, BY SELECTIVE (BRUSH) METHOD |
| MIL-C-51090 Revision A:1963 | CASEIN HYDROLYSATE |
| MIL-DTL-32585 Base Document:2017 | Insulation, Thermal and Acoustic, Fibrous Glass |
| MIL-I-22023 Revision D:1982 | INSULATION FELT, THERMAL AND SOUND ABSORBING FELT, FIBROUS GLASS, FLEXIBLE |
| O-P-1731 Base Document:1973 | PENETRATING FLUID |
| MIL-DTL-24800 Base Document:1996 | CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS |
| O-S-602 Revision E:1977 | SODIUM HYPOCHLORITE SOLUTION |
| MIL I 85470 : A | INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH |
| MIL-DTL-27686 Revision G:1997 | INHIBITOR, ICING, FUEL SYSTEM |
| MIL-DTL-757 Revision C:2012 | Lead Styphnate, Normal |
| MIL-L-00757 Revision B:1994 | LEAD STYPHNATE, NORMAL |
| P-W-155 Revision C:1978 | WAX, FLOOR, WATER-EMULSION |
| A-A-19 Revision D:2009 | Scale Removing Compound (Powder, Sulfamic Acid) |
| TT-S-223 Revision B:1978 | SEALER, SURFACE, FLOOR, WATER EMULSION TYPE |
| MIL-STD-1330 Revision D:1996 | STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS |
| O-C-430 Revision A:1975 | CLEANING COMPOUND, PAINT BRUSH |
| MIL-L-16355 Revision E:1993 | LEAD STYPHNATE, BASIC |
| MIL-G-13734 Revision B:1968 | GERMICIDE, QUARTERNARY AMMONIUM TYPE |
| A-A-1270 Base Document:1996 | ADHESIVE, POLYVINYL ACETATE EMULSION, GENERAL PURPOSE |
| MIL-PRF-29607 Base Document:1996 | CLEANING COMPOUND, AVIONICS COMPONENTS, NON-OZONE DEPLETING |
| MIL-L-3055 Revision C:1992 | LEAD AZIDE |
| MIL-C-87936 Revision A:1985 | CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE |
| DOD-F-24610 Base Document:1982 | FIXANT, HOLD DOWN |
| JJJ-L-821 Revision A:1969 | LITHOGRAPHIC PLATE PRESERVING GUM |
| MIL-L-63470 Base Document:1981 | Lithium Chloride (For Use In Ammunition) |
| A-A-2702 Revision B:1998 | SEALING COMPOUND (LIQUID PROTECTANT AND "BEAUTIFIER") |
| MIL I 27686 : F | INHIBITOR, ICING, FUEL SYSTEM |
| MIL-PRF-32359 Base Document:2012 | CLEANER, GENERAL, FOR GROUND VEHICLES AND GROUND SUPPORT EQUIPMENT, HAP-FREE |
| MIL-PRF-22344 Revision E:2004 | INSULATION, PIPE, THERMAL |
| MIL-C-83873 Revision A:1993 | CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
| MIL C 29602 : 0 | CLEANING COMPOUNDS, FOR PARTS WASHERS AND SPRAY CABINETS |
| MIL-PRF-32405 Base Document:2013 | CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
| P-F-430 Revision C:1978 | FINISH, FLOOR, WATER EMULSION (FOR USE ON LIGHT COLORED FLOORS) |
| P-C-436 Revision E:1986 | CLEANING COMPOUND, ALKALI, BOILING VAT (SOAK) OR HYDROSTEAM |
| CCC-C-46 Revision D:1986 | CLOTH, CLEANING, NONWOVEN FABRIC |
| MIL-PRF-32177 Revision A:2012 | CLEANING COMPOUND, NONSKID |
| MIL L 0016355 : D | LEAD STYPHNATE, BASIC |
| O-B-420 Revision C:1976 | BLEACH, LAUNDRY, ORGANIC CHLORINE |
| A-A-50169 Revision B:2011 | Skin Protective Compounds, Chemical Barrier |
| MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-D-83411 Revision A:1973 | DEICER/ANTI-ICER FLUID (FOR RUNWAYS AND TAXIWAYS) |
| MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| MIL-STD-1678-3 Revision C:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 3: PHYSICAL, MECHANICAL, ENVIRONMENTAL AND MATERIAL MEASUREMENTS (PART 3 OF 6 PARTS) |
| MIL-PRF-32587 Base Document:2018 | Remover, Paint, Hap-Free, Neutral |
| MIL-P-47215 Revision B:1992 | PRIMER, ABLATIVE RESISTANT COATING |
| ASTM D 1076 : 2015 : REDLINE | Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
| ASTM D 6361/D6361M : 1998 : R2015 | Standard Guide for Selecting Cleaning Agents and Processes |
| ASTM D 778 : 1997 : R2007 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures) (Withdrawn 2010) |
| ASTM D 778 : 1997 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures) |
| ASTM F 62 : 1968 : R1984 | Method of Test for Tin in Electronic Grade Hydrogen Peroxide Solutions |
| ASTM D 4078 : 2002 : R2008 | Standard Specification for Water Emulsion Floor Polish |
| ASTM D 1208 : 1996 : R2007 | Standard Test Methods for Common Properties of Certain Pigments |
| ASTM D 1583 : 2001 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
| ASTM D 6813 : 2002 : REV A : R2013 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
| ASTM D 6666 : 2004 : R2014 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
| ASTM D 3837 : 1995 : R2002 | Standard Practice for Preparing a Solution of Alkali-Soluble Resins |
| ASTM D 4608 : 1989 : R2003 | Standard Test Method for Citrate in Detergents |
| ASTM D 3837 : 1995 | Standard Practice for Preparing a Solution of Alkali-Soluble Resins |
| ASTM D 3837 : 1995 : R2012 | Standard Practice for Preparing a Solution of Alkali–Soluble Resins |
| ASTM D 4608 : 1989 : R2009 | Standard Test Method for Citrate in Detergents |
| BS M 75:1994 | Aircraft de-icing/anti-icing Newtonian fluids, ISO type I |
| ASTM D 6666 : 2004 : R2009 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
| ASTM D 2363 : 1979 : R1995 : EDT 1 | Standard Test Methods for Hydroxypropyl Methylcellulose |
| ASTM F 7 : 1995 : R2016 | Standard Specification for Aluminum Oxide Powder |
| ASTM D 2363 : 1979 : R2011 | Standard Test Methods for Hydroxypropyl Methylcellulose |
| AASHTO T 157 : 2012(R2016) | Standard Method of Test for Air-Entraining Admixtures for Concrete<br> |
| ASTM F 7 : 1995 : R2011 | Standard Specification for Aluminum Oxide Powder |
| ASTM D 2165 : 1994 : R2012 : EDT 1 | Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers (Withdrawn 2021) |
| ASTM D 3837 : 1995 : R2019 | Standard Practice for Preparing a Solution of Alkali–Soluble Resins |
| DIN EN 16900:2015-09 (Draft) | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| ASTM D 464 : 2015 : REDLINE | Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products |
| ASTM D 3837 : 1995 : R2007 | Standard Practice for Preparing a Solution of Alkali-Soluble Resins |
| ASTM D 3716 : 2014 : REDLINE | Standard Test Methods for Use of Emulsion Polymers in Floor Polishes |
| ASTM D 501 : 2003 : R2009 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
| ASTM D 6361 : 1998 | Standard Guide for Selecting Cleaning Agents and Processes |
| ASTM D 4608 : 1989 : R1995 : EDT 1 | Standard Test Method for Citrate in Detergents |
| ASTM D 2363 : 1979 : R2000 : EDT 1 | Standard Test Methods for Hydroxypropyl Methylcellulose |
| ASTM F 7 : 1995 : R2006 | Standard Specification for Aluminum Oxide Powder |
| ASTM D 2165 : 1994 : R2006 | Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers |
| ASTM D 1293 : 2018 : REDLINE | Standard Test Methods for pH of Water |
| ASTM C 400 : 1998 : R2006 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
| ASTM D 3440 : 2013 : REDLINE | GUIDE FOR PREPARING SPECIFICATIONS FOR WATER-EMULSION FLOOR POLISHES |
| ASTM D 7544 : 2012 : R2017 | Standard Specification for Pyrolysis Liquid Biofuel |
| ASTM D 6739 : 2011 | Standard Test Method for Silica<char: emdash>pH Value |
| ASTM F 7 : 1995 : R2000 | Standard Specification for Aluminum Oxide Powder |
| ASTM D 202 : 2017 : REDLINE | Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation |
| ASTM D 1172 : 2015 : REDLINE | Standard Guide for pH of Aqueous Solutions of Soaps and Detergents |
| ASTM D 7044 : 2015 : REDLINE | Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids |
| ASTM D 4317 : 2016 : REDLINE | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
| ASTM C 25 : 2017 : REDLINE | TEST METHODS FOR CHEMICAL ANALYSIS OF LIMESTONE, QUICKLIME, AND HYDRATED LIME |
| ASTM D 2165 : 1994 : R2000 | Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers |
| ASTM D 6666 : 2004 : R2019 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
| ASTM C 400 : 1998 : R2013 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
| ASTM E 359 : 2017 : REDLINE | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
| ASTM C 400 : 1998 : R2013 : EDT 1 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
| ASTM E 1910 : 2004 | Test Method for Agricultural pH Control Agents |
| ASTM D 4608 : 1989 : R2017 | Standard Test Method for Citrate in Detergents |
| ASTM D 6666 : 2004 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 4441 : 2015 : REDLINE | Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
| PD CEN/TR 17103:2017 | Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination |
| ASTM E 1547 : 2009 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM C 400 : 1998 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
| BS M 78:1995 | Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II |
| ASTM D 7705/D7705M : 2012 | Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction |
| ASTM D 2363 : 1979 : R2006 | Standard Test Methods for Hydroxypropyl Methylcellulose |
| ASTM D 501 : 2003 : R2016 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
| ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM D 7544 : 2012 | Standard Specification for Pyrolysis Liquid Biofuel |
| ASTM E 1547 : 2009 : R2017 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM D 6739 : 2011 : R2015 | Standard Test Method for Silica—pH Value |
| ASTM D 501 : 2003 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
| MIL-PRF-29602 Revision A:2005 | CLEANING COMPOUNDS, PARTS WASHER AND SPRAY CABINET |
| ASTM B 368 : 2009 : R2014 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| SAE J3021_201410 | Recommended Practice for Determining Material Properties of Li-Battery Cathode Active Materials |
| ASTM D 465 : 2015 : REDLINE | Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products |
| ASTM D 7100 : 2011 : REDLINE | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
| ASTM D 6361/D6361M : 1998 : R2010 : EDT 1 | Standard Guide for Selecting Cleaning Agents and Processes |
| ASTM D 4213 : 2008 : R2012 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
| ASTM D 4078 : 2002 : R2015 | Standard Specification for Water Emulsion Floor Polish |
| ASTM D 4010 : 1983 : R1995 | Standard Specification for Waterless Hand Cleaner (Withdrawn 2000) |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| UNE-EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| ASTM D 2106 : 2007 | Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents |
| ASTM D 4584 : 2005 : R2010 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
| ASTM D 2106 : 2007 : R2017 | Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents |
| ASTM D 4584 : 2005 : R2015 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
| ASTM D 6813 : 2002 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 1627 : 1994 : R2000 | Standard Test Methods for Chemical Analysis of Acid Copper Chromate (Withdrawn 2006) |
| ASTM F 862 : 2011 | Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids |
| ASTM D 2106 : 2007 : R2012 | Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents |
| ASTM D 6813 : 2002 : REV A | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| TAPPI T 252 : 2002 | PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD |
| ASTM D 2073 : 1992 : R1998 : EDT 1 | Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines, Amidoamines, and Diamines by Referee Potentiometric Method (Withdrawn 2007) |
| ASTM D 2081 : 1992 : R1998 | Standard Test Method for pH of Fatty Quaternary Ammonium Chlorides (Withdrawn 2007) |
| ASTM D 2106 : 2007 : EDT 1 | Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents |
| ASTM D 4143 : 2016 : REDLINE | Standard Guide for Testing Latex Vehicles |
| ASTM D 2080 : 1992 : R1998 | Standard Test Method for Average Molecular Weight of Fatty Quaternary Ammonium Chlorides (Withdrawn 2007) |
| TAPPI T 252 : 2002 : R2012 | PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD |
| ASTM D 4584 : 2005 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
| TAPPI T 252 : 2002 : R2007 | PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD |
| ASTM F 862 : 2011 : R2017 | Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids |
| ASTM D 6813 : 2002 : REV A : R2007 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM E 1910/E1910M : 2015 : REDLINE | Standard Test Method for Agricultural pH Control Agents, Measurement of pH Change and Buffering Capacity |
| SAE AMSC19853 | Carbon Removing Compound (For Use in Agitated Tank) |
| CSA N287.5 :2011 | EXAMINATION AND TESTING REQUIREMENTS FOR CONCRETE CONTAINMENT STRUCTURES FOR NUCLEAR POWER PLANTS |
| ASTM D 4078 : 2002 | Standard Specification for Water Emulsion Floor Polish |
| ASTM D 1208 : 1996 : R2002 | Standard Test Methods for Common Properties of Certain Pigments |
| ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
| ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 1583 : 2001 : R2013 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
| ASTM E 2275 : 2014 : REDLINE | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
| SAE MS1005_201708 | Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids—Specification |
| SAE AMS1541C | Cleaner, Fuel Drop Tank Water-Soluble |
| BS EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods |
| EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| TT-R-2918 Revision A:2001 | REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
| ASTM B 368 : 2009 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| MIL-PRF-85704 Revision C:1998 | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| ASTM D 1583 : 2001 : R2008 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
| ASTM D 1279 : 1982 : R1994 | Standard Test Method for Buffering Action of Metal Cleaners (Withdrawn 1999) |
| ASTM D 1208 : 1996 | Standard Test Methods for Common Properties of Certain Pigments |
| ASTM D 1583 : 2001 : R2018 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
| SAE AS5900C | Standard Test Method for Aerodynamic Acceptance of AMS1424 and AMS1428 Aircraft Deicing/Anti-Icing Fluids |
| SAE AMS1424N | Fluid, Aircraft Deicing/Anti-Icing, SAE Type 1 |
| SAE AMS1548B | Cleaner, Turbine Engine Gas Path Solvent Emulsion Type |
| SAE MS1000_201302 | Lubricants, Industrial Oils, and Related Products - Classification |
| CEN/TR 17103:2017 | Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination |
| SAE AMS1725C | Skin Protective Compound, Chemical Barrier |
| SAE AMS1431D | Compound, Solid Runway and Taxiway Deicing/Anti-Icing |
| SAE J2334_201604 | Laboratory Cyclic Corrosion Test |
| TAPPI T 428 : 2013 | HOT WATER EXTRACTABLE ACIDITY OR ALKALINITY OF PAPER |
| SAE AMS1426D | Fluid, Deicing/Anti-Icing, Runways and Taxiways Glycol Base |
| SAE AMS 1432 : 1995 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS, POTASSIUM ACETATE BASE |
| SAE AMS1476C | Deodorant, Aircraft Toilet |
| SAE AMS3803A | Wipes, Cotton, Loosely Woven |
| S.R. CEN/TR 17103:2017 | FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
| ASTM E 180 : 2003 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.