ASTM E 694 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Laboratory Glass Volumetric Apparatus
Hardcopy , PDF
15-02-2024
English
16-01-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers general requirements common to glass volumetric apparatus.
| Committee |
E 41
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers general requirements common to glass volumetric apparatus. Specific dimensions and tolerances for applicable instruments are given in other specifications as cited throughout this specification. Glass must conform to Specifications E438 and be calibrated in accordance with Practice E542.
1.1.1Class A—Each instrument shall be marked with the letter A to signify compliance with applicable construction and accuracy requirements. Instruments may be marked with an identification marker (serial number) at the option of the manufacturer.
1.1.2Class B—General purpose instruments are of the same basic design as Class A. However, volumetric tolerances for Class B instruments shall be within twice the specified range allowed for Class A unless otherwise specified.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| NASA-STD-7012A:2023 | LEAK TEST REQUIREMENTS |
| ASTM E 1349 : 2006 : R2022 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM E 1189 : 2000 : R2022 | Standard Specification for Micro-Burets (Koch Style) |
| ASTM C 185 : 2020 | Standard Test Method for Air Content of Hydraulic Cement Mortar |
| ASTM D 5085 : 2021 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Suppressed Ion Chromatography |
| ASTM D 3606 : 2022 | Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography |
| ASTM D 8421 : 2022 | Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Matrices by Co-solvation followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM E 50 : 2017 | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 200 : 2023 | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM E 1377 : 1999 : R2022 | Standard Specification for Laboratory Glass Kjeldahl Flasks |
| ASTM E 288 : 2010 : R2017 | Standard Specification for Laboratory Glass Volumetric Flasks |
| ASTM D 5086 : 2020 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| ASTM C 1009 : 2021 | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
| ASTM E 788 : 1997 : R2019 | Standard Specification for Pipet, Blood Diluting |
| ASTM D 8535 : 2023 | Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Soil/Biosolid Matrices by Solvent Extraction, Filtering, and Followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM E 1094 : 2004 : R2021 | Standard Specification for Pharmaceutical Glass Graduates |
| ASTM E 1293 : 2002 : R2019 | Standard Specification for Glass Measuring Pipets |
| ASTM E 3171 : 2021 : REV A | Standard Test Method for Determination of Total Silver in Textiles by ICP-OES or ICP-MS Analysis |
| ASTM E 911 : 1998 : R2021 | Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
| ASTM E 1878 : 1997 | Standard Specification for Laboratory Glass Volumetric Flasks, Special Use |
| ASTM E 1272 : 2002 : R2007 | Standard Specification for Laboratory Glass Graduated Cylinders |
| ASTM E 1045 : 2000 : R2005 | Standard Specification for Pipet, Sahli Hemoglobin |
| ASTM C 188 : 2017 | Standard Test Method for Density of Hydraulic Cement |
| ASTM E 1272 : 2002 | Standard Specification for Laboratory Glass Graduated Cylinders |
| ASTM E 1272 : 1995 : R1999 | Standard Specification for Laboratory Glass Graduated Cylinders |
| ASTM E 676 : 1994 : R1998 | Standard Specification for Interchangeable Taper-Ground Joints |
| ASTM E 675 : 1994 : R1998 | Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers |
| ASTM E 1878 : 1997 : R2013 | Standard Specification for Laboratory Glass Volumetric Flasks, Special Use |
| ASTM E 1272 : 2002 : R2019 | Standard Specification for Laboratory Glass Graduated Cylinders |
| ASTM E 911 : 1998 : R2015 | Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
| ASTM E 1878 : 1997 : R2003 | Standard Specification for Laboratory Glass Volumetric Flasks, Special Use |
| ASTM E 542 : 2001 : R2021 | Standard Practice for Calibration of Laboratory Volumetric Apparatus |
| ASTM E 1272 : 2002 : R2012 | Standard Specification for Laboratory Glass Graduated Cylinders |
| ASTM E 288 : 1994 : R1998 | Standard Specification for Laboratory Glass Volumetric Flasks |
| ASTM E 671 : 1998 : R2022 | Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus |
| ASTM E 1045 : 2000 : R2010 | Standard Specification for Pipet, Sahli Hemoglobin |
| ASTM E 1045 : 2000 : R2016 | Standard Specification for Pipet, Sahli Hemoglobin |
| ASTM E 1045 :2000 | Standard Specification for Pipet, Sahli Hemoglobin |
| ASTM E 542 : 2001 : R2012 | Standard Practice for Calibration of Laboratory Volumetric Apparatus |
| ASTM E 1045 : 2000 : R2022 | Standard Specification for Pipet, Sahli Hemoglobin |
| ASTM C 188 : 2017 : R2023 | Standard Test Method for Density of Hydraulic Cement |
| ASTM E 1045 : 1985 : R1996 | Standard Specification for Pipet, Sahli Hemoglobin |
| ASTM E 1878 : 1997 : R2008 | Standard Specification for Laboratory Glass Volumetric Flasks, Special Use |
| ASTM E 671 : 1998 : R2016 | Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus |
| ASTM E 542 : 2022 | Standard Practice for Gravimetric Calibration of Laboratory Volumetric Instruments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.