ASTM E 631 : 2015 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Terminology of Building Constructions
Available format(s)
PDF
Language(s)
English
Published date
17-04-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.11, 2015 Defines the terms and definitions pertaining to the field of buildings, and in particular, terms related to the standards generated by ASTM Committee E 06 on Performance of Buildings.
| Committee |
E 06
|
| DevelopmentNote |
Supersedes ASTM E 540. (03/2002)
|
| DocumentType |
Redline
|
| Pages |
35
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This Terminology consists of terms and definitions pertaining to the subject field of buildings and building construction, and in particular, terms related to the standards generated by ASTM Committee E06 on Performance of Buildings.
1.2The purpose of this Terminology is to provide preferred and admitted designations along with the meanings and explanations of technical concepts applied in the subject field of buildings and construction, written for both the non-expert and the expert user.
1.3This comprehensive Terminology standard contains all ASTM standardized definitions generated in ASTM Committee E06 that are considered general in nature. Beyond this comprehensive terminology, there are also separate terminology standards that have been developed within Committee E06 by a number of technical subcommittees.
1.3.1These separate general terminologies are created relative to specific subject fields and the terminological entries have been grouped for convenient use (see Section 2 and Appendix X1). Some terminology data contained in those other subsidiary terminology standards also appear in this comprehensive standard.
1.3.2The following standards are separate terminologies that have been developed within specific E06 Subcommittees whose term entry lists are provided in Appendix X1:
| E833 | Terminology of Building Economics |
| E1480 | Terminology of Facility Management (Building-Related) |
| E1481 | Terminology of Railing Systems and Rails for Buildings |
| E1605 | Terminology Relating to Lead in Buildings |
| E1749 | Terminology Relating to Rigid Wall Relocatable Shelters |
| E2110 | Terminology for Exterior Insulation and Finish Systems (EIFS) |
| E2151 | Terminology of Guides for Specifying and Evaluating Performance |
| E2265 | Terminology for Anchors and Fasteners in Concrete and Masonry |
1.4Terms are listed in alphabetical sequence. Compound terms appear in the natural spoken order. To show the relationships in certain families of concepts, groups of narrower terms and their definitions are grouped under the definition of the broader term. Each such sub-entry is listed also (in italics) with a cross-reference to the special class.
1.5Certain standard definitions herein are adopted from other sources. Each is an exact copy. The source is identified at the right margin following the definition, and is listed in Section 2.
| ASTM E 196 : 2006 : R2012 | Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs |
| ASTM E 283 : 2004 | Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen |
| ASTM E 1748 : 1995 | Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System |
| ASTM E 2178 : 2013 : REDLINE | Standard Test Method for Air Permeance of Building Materials |
| ASTM E 3036 : 2015 | Standard Guide for Notating Facade Conditions in the Field |
| ASTM E 998 : 2012 : REDLINE | Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method |
| ASTM E 564 : 2006 | Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings |
| ASTM E 1666 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
| ASTM C 1564 : 2015 : REDLINE | Standard Guide for Use of Silicone Sealants for Protective Glazing Systems |
| ASTM F 2078 : 2015 : REDLINE | Standard Terminology Relating to Hydrogen Embrittlement Testing |
| ASTM D 6630/D6630M : 2016 : REDLINE | Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance |
| ASTM E 970 : 2017 : REDLINE | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
| ASTM E 605/E605M : 1993 : R2015 : EDT 1 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 2068 : 2000 : R2016 | Standard Test Method for Determination of Operating Force of Sliding Windows and Doors |
| ASTM E 661 : 2003 : R2015 : EDT 1 | Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads |
| ASTM E 1258 : 1988 : R2012 | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| ASTM E 2817 : 2011 : R2018 | Standard Test Method for Test Fueling Masonry Heaters |
| ASTM D 4099 : 1995 | Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999) |
| ASTM E 2485 : 2006 | Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings |
| ASTM E 605 : 1993 : R2000 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 2268 : 2004 : R2011 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference |
| ASTM E 2392/E2392M : 2010 | Standard Guide for Design of Earthen Wall Building Systems |
| ASTM E 1666 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
| ASTM E 741 : 2011 : R2017 | Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution |
| ASTM E 1693 : 1995 : R1999 | Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets |
| ASTM E 1664 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
| ASTM C 1715/C1715M : 2015 : REDLINE | Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems |
| ASTM E 1836/E1836M : 2009 : R2016 | Standard Practice for Building Floor Area Measurements for Facility Management |
| ASTM E 2635 : 2014 : REDLINE | Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation |
| ASTM E 1646 : 1995 : R2003 | Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference |
| ASTM E 2395 : 2006 | Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact. |
| ASTM D 7445 : 2018 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
| ASTM E 1694 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies |
| ASTM E 2558 : 2013 : REDLINE | Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces |
| ASTM E 2052 : 1999 | Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008) |
| ASTM E 767 : 1996 : R2001 | Standard Test Method for Shear Strength Properties of Metal Connector Plates (Withdrawn 2005) |
| ASTM E 1668 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff |
| ASTM E 1121 : 2015 : REDLINE | Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
| ASTM E 2359 : 2006 | Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly |
| ASTM E 331 : 2000 : R2009 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 2134 : 2001 : R2006 | Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) |
| ASTM E 605 : 1993 : R2011 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 1368 : 2014 : REDLINE | Standard Practice for Visual Inspection of Asbestos Abatement Projects |
| ASTM E 741 : 2011 | Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution |
| ASTM E 1857 : 1997 : R2004 | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
| ASTM E 987 : 1988 : R2001 | Standard Test Methods for Deglazing Force of Fenestration Products |
| ASTM E 2271 : 2005 : REV A : R2012 : EDT 1 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities |
| ASTM E 1668 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff |
| ASTM E 2319 : 2004 | Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen |
| ASTM E 2068 : 2000 : R2008 | Standard Test Method for Determination of Operating Force of Sliding Windows and Doors |
| ASTM E 575 : 2005 : R2011 | Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies |
| ASTM E 1424 : 1991 : R2016 | Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen |
| ASTM E 2099 : 2000 : R2007 | Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
| ASTM C 1735 : 2017 : REDLINE | Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation |
| ASTM E 1668 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff |
| ASTM E 1692 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants |
| ASTM E 1665 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Facility Protection |
| ASTM E 2112 : 2007 : R2016 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
| ASTM E 529 : 2004 : R2011 | Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction |
| ASTM E 2556/E2556M : 2010 : R2016 | Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment |
| ASTM E 1258 : 1988 : R1998 | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| ASTM E 2271 : 2005 : REV A | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
| ASTM E 241 : 2009 | Standard Guide for Limiting Water-Induced Damage to Buildings |
| ASTM E 2392/E2392M : 2010 : R2016 | Standard Guide for Design of Earthen Wall Building Systems |
| ASTM D 4756 : 2015 : REDLINE | Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit |
| ASTM C 1788 : 2014 | Standard Specification for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications |
| ASTM E 547 : 2000 : R2016 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference |
| ASTM E 2127 : 2001 : REV A : R2015 : EDT 1 | Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction |
| ASTM E 405 : 2004 : R2018 | Standard Test Methods for Wear Testing Rotary Operators for Windows |
| ASTM E 1971 : 2005 : R2011 | Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings |
| ASTM E 1425 : 2014 : REDLINE | Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems |
| ASTM E 937 : 1993 : R2011 | Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM D 1356 : 2017 : REDLINE | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 447 : 1997 | Test Methods for Compressive Strength of Laboratory Constructed Masonry Prisms (Withdrawn 1998) |
| ASTM E 1556 : 2012 : REDLINE | Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair |
| ASTM E 894 : 1988 : R2004 | Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings |
| ASTM E 2260 : 2003 : R2012 | Standard Guide for Repointing (Tuckpointing) Historic Masonry |
| ASTM E 1185 : 2015 : REDLINE | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
| ASTM E 1800 : 2013 : REDLINE | Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels |
| ASTM E 2269 : 2014 : REDLINE | Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography |
| ASTM E 547 : 2000 : R2009 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference |
| ASTM E 405 : 2004 : R2012 | Standard Test Methods for Wear Testing Rotary Operators for Windows |
| ASTM E 2954 : 2015 | Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members |
| ASTM E 1669 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding |
| ASTM C 1764 : 2012 : R2016 | Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications |
| ASTM E 1424 : 1991 : R2008 | Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen |
| ASTM E 1612 : 1994 : R2005 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM E 1996 : 2017 : REDLINE | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM E 1399/E1399M : 1997 : R2013 : EDT 1 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM E 2786 : 2010 : R2015 | Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems |
| ASTM E 1514 : 1998 : R2011 | Standard Specification for Structural Standing Seam Steel Roof Panel Systems |
| ASTM E 1481 : 2000 : REV A | Standard Terminology of Railing Systems and Rails for Buildings |
| ASTM E 2516 : 2011 : REDLINE | Standard Classification for Cost Estimate Classification System |
| ASTM E 1074 : 2015 : REDLINE | Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems |
| ASTM D 8052/D8052M : 2017 | Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies |
| ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 2260 : 2003 | Standard Guide for Repointing (Tuckpointing) Historic Masonry |
| ASTM E 1993 : 1998 : R2008 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM E 1701 : 1995 : R2018 | Standard Classification for Serviceability of an Office Facility for Manageability |
| ASTM E 1692 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants |
| ASTM E 2336 : 2016 : REDLINE | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ASTM E 1667 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants |
| ASTM E 964 : 2015 : REDLINE | Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems |
| ASTM E 1555 : 2012 : REDLINE | Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair |
| ASTM E 1783 : 1996 : R2005 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM E 330 : 2002 | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 1664 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
| ASTM E 546 : 2014 : REDLINE | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units |
| ASTM E 2168 : 2010 : R2016 | Standard Classification for Allowance, Contingency, and Reserve Sums in Building Construction Estimating |
| ASTM F 842 : 2017 : REDLINE | Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact |
| ASTM E 196 : 2006 | Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs |
| ASTM E 2127 : 2001 : REV A : R2006 | Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction |
| ASTM E 767 : 1996 | Standard Test Method for Shear Strength Properties of Metal Connector Plates |
| ASTM E 894 : 1988 : R1998 | Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings |
| ASTM E 2140 : 2001 | Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
| ASTM E 241 : 2009 : R2014 : EDT 1 | Standard Guide for Limiting Water-Induced Damage to Buildings |
| ASTM E 1513 : 1993 : R2000 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 2358 : 2017 : REDLINE | Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades |
| ASTM E 73 : 2013 : REDLINE | Standard Practice for Static Load Testing of Truss Assemblies |
| ASTM E 1057 : 2015 : REDLINE | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
| ASTM E 2271 : 2005 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
| ASTM E 1857 : 1997 : R2013 : EDT 1 | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
| ASTM E 936 : 1998 | Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing |
| ASTM E 1258 : 1988 : R2008 | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| ASTM E 2957 : 2017 : REDLINE | Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
| ASTM E 2260 : 2003 : R2012 : EDT 1 | Standard Guide for Repointing (Tuckpointing) Historic Masonry |
| ASTM E 1692 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants |
| ASTM E 2925 : 2017 : REDLINE | Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function |
| ASTM E 1637 : 1998 : R2003 | Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
| ASTM E 3119 : 2017 : EDT 1 | Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing |
| ASTM E 2168 : 2010 | Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating |
| ASTM E 2461 : 2012 : R2017 | Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs |
| ASTM E 1646 : 1995 : R2018 | Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference |
| ASTM E 2322 : 2003 : R2009 | Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction |
| ASTM E 1801 : 2015 : REDLINE | Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters |
| ASTM E 1464 : 1992 : R2005 | Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities (Withdrawn 2014) |
| ASTM E 2461 : 2012 | Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs |
| ASTM E 2013 : 2012 : REDLINE | Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study |
| ASTM E 2619 : 2008 | Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings |
| ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 2637 : 2017 : REDLINE | Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification <astmref design="E2150"/> |
| ASTM E 1670 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance |
| ASTM E 2779 : 2010 : R2017 | Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters |
| ASTM D 5319 : 2017 : REDLINE | Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
| ASTM E 1583 : 2017 | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
| ASTM E 2032 : 2009 : R2017 | Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM E 661 : 2003 | Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads |
| ASTM E 1612/E1612M : 1994 : R2017 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM E 835/E835M : 1993 : R2002 | Standard Guide for Modular Coordination of Clay and Concrete Masonry Units (Withdrawn 2011) |
| ASTM E 1424 : 1991 : R2000 | Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen |
| ASTM E 1677 : 2011 : REDLINE | SPECIFICATION FOR AIR BARRIER (AB) MATERIAL OR SYSTEM FOR LOW-RISE FRAMED BUILDING WALLS |
| ASTM E 2270 : 2014 : REDLINE | Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions |
| ASTM E 2400 : 2006 | Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems |
| ASTM E 2268 : 2004 : R2016 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference |
| ASTM E 2691 : 2016 : REDLINE | Standard Practice for Job Productivity Measurement |
| ASTM E 2140 : 2001 : R2009 | Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
| ASTM E 1481 : 2000 : REV A : R2008 | Standard Terminology of Railing Systems and Rails for Buildings |
| ASTM E 1300 : 2016 : REDLINE | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 1334 : 1995 : R2005 | Standard Practice for Rating the Serviceability of a Building or Building-Related Facility |
| ASTM E 1233/E1233M : 2014 : REDLINE | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential |
| ASTM E 2127 : 2001 : REV A : R2007 | Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction |
| ASTM E 2112 : 2007 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
| ASTM E 2570/E2570M : 2007 : R2019 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
| ASTM E 1670 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance |
| ASTM E 1664 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors<rangeref></rangeref > |
| ASTM E 1637 : 1998 : R2017 : EDT 1 | Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
| ASTM E 695 : 2003 : R2015 : EDT 1 | Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading |
| ASTM E 2484 : 2008 : R2015 | Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Withdrawn 2024) |
| ASTM E 1514 : 1998 | Standard Specification for Structural Standing Seam Steel Roof Panel Systems |
| ASTM E 1514 : 1998 : R2003 | Standard Specification for Structural Standing Seam Steel Roof Panel Systems |
| ASTM E 1669 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding |
| ASTM F 3038 : 2014 | Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems |
| ASTM E 1258 : 1988 : R2003 | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| ASTM E 936 : 1998 : R2004 | Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (Withdrawn 2012) |
| ASTM E 1667 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants |
| ASTM E 2649 : 2012 | Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy |
| ASTM C 1787 : 2014 | Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications |
| ASTM E 1662 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment |
| ASTM E 2322 :2003 | Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction |
| ASTM E 2432 : 2017 : REDLINE | GUIDE FOR GENERAL PRINCIPLES OF SUSTAINABILITY RELATIVE TO BUILDINGS |
| ASTM E 3087 : 2017 | Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods |
| ASTM F 3057 : 2016 : REDLINE | Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings |
| ASTM E 1662 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment |
| ASTM E 2484 : 2008 | Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices |
| ASTM E 1670 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance |
| ASTM E 2844 : 2015 : EDT 1 | Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit |
| ASTM E 1637 : 1998 : R2011 | Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
| ASTM E 990 : 2013 : REDLINE | Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels |
| ASTM E 1637 : 1998 | Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
| ASTM E 2321 : 2003 | Standard Practice for Use of Test Methods E 96 for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS) |
| ASTM E 3037 : 2016 | Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems |
| ASTM E 2323 : 2004 | Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer (Withdrawn 2012) |
| ASTM E 1662 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment |
| ASTM E 1694 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies |
| ASTM E 2841 : 2011 | Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions |
| ASTM E 2785 : 2014 : REDLINE | Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions |
| ASTM E 331 : 2000 : R2016 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 405 : 2004 | Standard Test Methods for Wear Testing Rotary Operators for Windows |
| ASTM E 1423 : 2014 : REDLINE | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
| ASTM E 2268 : 2004 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference |
| ASTM E 1190 : 2011-11 | TEST METHODS FOR STRENGTH OF POWER-ACTUATED FASTENERS INSTALLED IN STRUCTURAL MEMBERS |
| ASTM E 1803 : 2014 : REDLINE | Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels |
| ASTM E 1669 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding |
| ASTM E 3026 : 2015 | Standard Guide for Readily Observable Moisture Affected Materials and Conditions Conducive to Elevated Moisture in Commercial Buildings: Visual Moisture Assessment Process |
| ASTM E 2099 : 2000 : R2014 : EDT 1 | Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
| 02/104966 DC : 0 | ISO/DIS 12055 - BUILDING CONSTRUCTION - GUARDRAIL SYSTEMS AND RAILS FOR BUILDINGS |
| ASTM E 1748 : 1995 : R2001 | Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System |
| ASTM E 1666 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
| ASTM E 1646 : 1995 | Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference |
| ASTM E 1826 : 2012 : REDLINE | Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded |
| ASTM E 1671 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Cleanliness |
| ASTM E 3130 : 2018 | Standard Guide for Developing Cost-Effective Community Resilience Strategies |
| ASTM E 2570 : 2007 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
| ASTM F 2912 : 2017 : REDLINE | Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings |
| ASTM E 1857 : 1997 | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
| ASTM E 3121/E3121M : 2017 | Standard Test Methods for Field Testing of Anchors in Concrete or Masonry |
| ASTM E 1851 : 2015 : REDLINE | Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures |
| ASTM E 2103/E2103M : 2013-06 | CLASSIFICATION FOR BRIDGE ELEMENTS - UNIFORMAT 2 |
| ASTM E 835/E835M : 1993 : R1999 | Standard Guide for Modular Coordination of Clay and Concrete Masonry Units |
| ASTM E 2266 : 2011 : REDLINE | Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion |
| ASTM E 1765 : 2016 : REDLINE | Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes |
| ASTM E 1399 : 1997 : R2009 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM C 1199 : 2014 : REDLINE | Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods |
| ASTM E 2843 : 2017 : REDLINE | Standard Specification for Demonstrating That a Building is in Walkable Proximity to Neighborhood Assets |
| ASTM E 1971 : 2005 | Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings |
| ASTM E 2514 : 2015 : REDLINE | Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses |
| ASTM E 1804 : 2016 : REDLINE | Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
| ASTM E 1480 : 1992 : R2004 | Standard Terminology of Facility Management (Building-Related) |
| ASTM E 695 : 2003 | Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading |
| ASTM D 7254 : 2017 : REDLINE | Standard Specification for Polypropylene (PP) Siding |
| ASTM E 1694 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies |
| ASTM C 1795 : 2017 : REDLINE | Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels |
| ASTM E 1701 : 1995 : R2005 | Standard Classification for Serviceability of an Office Facility for Manageability |
| ASTM C 1815 : 2017 | Standard Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension |
| ASTM E 1612/E1612M : 1994 : R2013 : EDT 1 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM E 1748 : 1995 : R2009 | Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System |
| ASTM E 1399 : 1997 : R2005 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM E 331 : 2000 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 575 : 2005 | Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies |
| ASTM E 2342/E2342M : 2010 : R2015 : EDT 1 | Standard Test Method for Durability Testing of Duct Sealants |
| ASTM E 547 : 2000 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference |
| ASTM E 1827 : 2011 : R2017 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
| ASTM E 3008/E3008M : 2016 | Standard Classification for Transportation Surface Elements—UNIFORMAT II |
| ASTM E 987 : 1988 : R2017 | Standard Test Methods for Deglazing Force of Fenestration Products |
| ASTM E 917 : 2015-10 | PRACTICE FOR MEASURING LIFE-CYCLE COSTS OF BUILDINGS AND BUILDING SYSTEMS |
| ASTM E 1671 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Cleanliness |
| ASTM E 1665 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Facility Protection |
| ASTM D 3841 : 2016 : REDLINE | Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
| ASTM E 2322 : 2003 : R2015 | Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction |
| ASTM E 154/E154M : 2008 : REV A : R2013 : EDT 1 | Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
| ASTM E 2032 : 2009 : R2013 | Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM E 1993/E1993M : 1998 : R2013 : EDT 1 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM E 2556/E2556M : 2010 | Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment |
| ASTM E 330/E330M : 2014 : REDLINE | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 1730 : 2015 : REDLINE | SPECIFICATION FOR RIGID FOAM FOR USE IN STRUCTURAL SANDWICH PANEL CORES |
| ASTM E 1480 : 1992 : R2013 | Standard Terminology of Facility Management (Building-Related) |
| ASTM E 1783 : 1996 : R2009 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM E 1233 : 2006 | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential |
| ASTM E 330 : 2002 : R2010 | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 2969 : 2017 | Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction |
| ASTM E 2392 : 2005 | Standard Guide for Design of Earthen Wall Building Systems |
| ASTM E 1612 : 1994 : R2000 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM E 1513 : 1993 : R2005 : EDT 1 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 2114 : 2017-03 | TERMINOLOGY FOR SUSTAINABILITY RELATIVE TO THE PERFORMANCE OF BUILDINGS |
| ASTM C 1851 : 2018 | Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus |
| ASTM E 987 : 1988 : R1994 : EDT 1 | Standard Test Methods for Deglazing Force of Fenestration Products |
| ASTM D 4973 : 1993 | Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999) |
| ASTM E 2264 : 2005 : R2013 | Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products |
| ASTM E 2506 : 2015 : REDLINE | Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities |
| ISO 20492-1:2008 | Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests |
| ASTM E 3069 : 2017 | Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall |
| ASTM E 3038 : 2016 | Standard Practice for Assessing and Qualifying Candidates as Inspectors of Firestop Systems and Fire-Resistive Joint Systems |
| ASTM E 2780 : 2010 : R2017 | Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters |
| ASTM E 2813 : 2012 | Standard Practice for Building Enclosure Commissioning |
| ASTM E 1661 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 3053 : 2017 | Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel |
| ASTM E 1410 : 1991 : R2005 | Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings (Withdrawn 2014) |
| ASTM E 2074 : 2000 | Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies |
| ASTM E 2393: 2010 | Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers |
| ASTM E 2912 : 2017 : REDLINE | Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction |
| ASTM E 2780 : 2010 | Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters |
| ASTM E 1660 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| ASTM E 2813 : 2012 : EDT 1 | Standard Practice for Building Enclosure Commissioning |
| ASTM E 2393 : 2010 : REV A | Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers |
| ASTM E 2393 : 2010 : REV A : R2015 | Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers |
| ASTM E 2837 : 2013 : R2017 | Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies |
| ASTM E 3054/E3054M : 2016 | Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes |
| ASTM E 2074 : 2000 : EDT 1 | Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies (Withdrawn 2007) |
| ASTM E 1661 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 2010 : 2001 | Standard Test Method for Positive Pressure Fire Tests of Window Assemblies (Withdrawn 2007) |
| ASTM E 1661 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 1660 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| ASTM E 1660 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| ASTM E 2837 : 2013 | Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies |
| ASTM E 1661 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 1509 : 2012 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
| ASTM E 1660 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| ASTM E 1509 : 2012 : R2017 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
| ASTM E 1410 : 1991 : R1997 : EDT 1 | Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings |
| ASTM E 3119 : 2017 | Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing |
| ASTM E 783 : 2002 | Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors |
| ASTM E 564 : 2006 : R2012 | Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings |
| ASTM E 2353 : 2016 : REDLINE | Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades |
| ASTM E 937 : 1993 : R2000 | Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 283 : 2004 : R2012 | Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen |
| ASTM E 2431 : 2012 : REDLINE | Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings |
| ASTM E 2134 : 2001 | Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) |
| ASTM E 1680 : 2016 : REDLINE | Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems |
| ASTM E 576 : 2014 : REDLINE | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position |
| ASTM E 2620 : 2015 : REDLINE | Standard Classification for Program and Project Estimate Summaries |
| CSA A123.21 : 2014 | STANDARD TEST METHOD FOR THE DYNAMIC WIND UPLIFT RESISTANCE OF MEMBRANE-ROOFING SYSTEMS |
| ASTM E 1612 : 1994 : R2009 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM E 1825 : 2017 : REDLINE | Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems |
| ASTM E 529 : 2004 | Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction |
| ASTM E 2141 : 2014 : REDLINE | Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units |
| ASTM E 2127 : 2001 : REV A | Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction |
| ASTM E 1993 : 1998 : R2002 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM E 605 : 1993 : R2006 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 2204 : 2015 : REDLINE | Standard Guide for Summarizing the Economic Impacts of Building-Related Projects |
| ASTM E 1369 : 2015 : REDLINE | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
| ASTM E 1334 : 1995 : R1999 | Standard Practice for Rating the Serviceability of a Building or Building-Related Facility |
| ASTM E 3090/E3090M : 2017 | Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems |
| ASTM E 865 : 2012 : REDLINE | Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels |
| ASTM E 1679 : 2013 : REDLINE | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed |
| ASTM E 2395 : 2006 : R2013 | Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact |
| ASTM E 2032 : 2009 | Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM E 2140 : 2001 : R2017 | Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
| ASTM E 2513 : 2007 : R2012 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| ASTM E 1701 : 1995 : R1999 | Standard Classification for Serviceability of an Office Facility for Manageability |
| ASTM E 1783/E1783M : 1996 : R2017 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM E 1693 : 1995 : R2018 | Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets<rangeref></rangeref > |
| ASTM E 2786 : 2010 | Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems |
| ASTM E 2779 : 2010 | Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters |
| ASTM E 1480 : 1992 : R1998 : EDT 1 | Standard Terminology of Facility Management (Building-Related) |
| ASTM E 1991 : 2005 | Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products (Withdrawn 2014) |
| ASTM E 2150 : 2017 : REDLINE | Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure |
| ASTM E 1665 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Facility Protection |
| ASTM E 2953 : 2014 | Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units |
| ASTM D 3679 : 2017 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
| ASTM E 894 : 1988 : R2010 | Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings |
| ASTM F 588 : 2017 : REDLINE | Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact |
| ASTM E 2068 : 2000 | Standard Test Method for Determination of Operating Force of Sliding Windows and Doors |
| ASTM E 661 : 2003 : R2009 | Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads |
| ASTM E 987 : 1988 : R2009 | Standard Test Methods for Deglazing Force of Fenestration Products |
| ASTM E 1946 : 2012 | Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects |
| ASTM E 1794 : 2013 : REDLINE | Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels |
| ASTM E 2319 : 2004 : R2011 | Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen |
| ASTM E 1671 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Cleanliness |
| ASTM D 4477 : 2016 : REDLINE | Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
| ASTM E 3074/E3074M : 2016 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities |
| ASTM E 1667 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants |
| ASTM E 1669 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding<rangeref></rangeref > |
| ASTM E 937/E937M : 1993 : R2015 : EDT 1 | Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 2099 : 2000 | Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
| ASTM E 1748 : 1995 : R2017 | Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System |
| ASTM E 1665 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Facility Protection |
| ASTM E 1399/E1399M : 1997 : R2017 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM E 1464 : 1992 : R1999 | Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities |
| ASTM E 1836/E1836M : 2009 : EDT 1 | Standard Practice for Building Floor Area Measurements for Facility Management |
| ASTM D 3678 : 2014 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
| ASTM E 1481 : 2000 : REV A : R2014 : EDT 1 | Standard Terminology of Railing Systems and Rails for Buildings |
| ASTM E 2513 : 2007 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| ASTM E 2320 : 2004 : R2018 | Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions |
| ASTM E 2320 : 2004 : R2012 | Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions |
| ASTM E 2320 : 2004 | Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions |
| ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
| ASTM E 2351 : 2004 : REV A : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality (Withdrawn 2022) |
| ASTM E 2136 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability |
| ASTM E 2351 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality |
| ASTM E 2351 : 2004 : REV A | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality |
| ASTM E 2267 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality (Withdrawn 2022) |
| ASTM E 2267 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality |
| ASTM E 2924 : 2014 | Standard Practice for Intumescent Coatings |
| ASTM D 5206 : 2013 : REDLINE | Standard Test Method for Windload Resistance of Rigid Plastic Siding |
| ASTM E 1700 : 2016 : REDLINE | Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope<rangeref></rangeref > |
| ASTM E 2750 : 2017 : REDLINE | Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM E814 |
| ASTM E 1662 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment |
| ASTM E 1663 : 2003 | Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology |
| ASTM E 695 : 2003 : R2009 | Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading |
| ASTM E 997 : 2015 : REDLINE | Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing |
| ASTM E 1091 : 2013 : REDLINE | Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
| ASTM E 1979 : 2017 : REDLINE | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM E 937 : 1993 : R2005 | Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 2156 : 2004 : R2013 | Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings (Withdrawn 2022) |
| ASTM E 2128 : 2017 : REDLINE | Standard Guide for Evaluating Water Leakage of Building Walls |
| ASTM E 1513 : 1993 : R2011 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 2400/E2400M : 2006 : R2015 : EDT 1 | Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems |
| ASTM E 1692 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants |
| ASTM E 1693 : 1995 : R2012 | Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets |
| ASTM E 1514 : 1998 : R2017 : EDT 1 | Standard Specification for Structural Standing Seam Steel Roof Panel Systems |
| ASTM C 1401 : 2014 : REDLINE | Standard Guide for Structural Sealant Glazing |
| ASTM E 1827 : 2011 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
| ASTM E 2778 : 2014 | Standard Specification for Custom Tiled/Mortared Masonry Heaters (Stoves) |
| ASHRAE 119 : 1988(RA 2004) | AIR LEAKAGE PERFORMANCE FOR DETACHED SINGLE-FAMILY RESIDENTIAL BUILDINGS |
| ASTM D 7586/D7586M : 2011 | Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies (Withdrawn 2020) |
| ASTM E 2115 : 2015 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
| ASTM E 1646 : 1995 : R2011 | Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference |
| ASTM C 1764 : 2012 | Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications |
| ASTM E 1699 : 2014 : REDLINE | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
| ASTM E 1105 : 2015 : REDLINE | Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference |
| ASTM E 2156 : 2004 | Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings |
| ASTM E 1668 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff |
| ASTM E 1993 : 1998 : R2002 : EDT 1 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM E 2129 : 2010-11 | PRACTICE FOR DATA COLLECTION FOR SUSTAINABILITY ASSESSMENT OF BUILDING PRODUCTS |
| ASTM E 1513/E1513M : 1993 : R2015 : EDT 1 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 1664 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
| ASTM F 3006 : 2013 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
| ASTM E 2392/E2392M : 2010 : EDT 1 | Standard Guide for Design of Earthen Wall Building Systems |
| ASTM E 1667 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants |
| ASTM E 2777 : 2014 | Standard Guide for Vegetative (Green) Roof Systems |
| ASTM E 2817 : 2011 | Standard Test Method for Test Fueling Masonry Heaters |
| ASTM E 2844 : 2015 | Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit |
| ASTM E 1694 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies |
| ASTM E 1663 : 2003 : R2010 | Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology |
| ASTM E 1671 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Cleanliness |
| ASTM E 1993 : 1998 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM E 2511 : 2017 : REDLINE | Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies |
| ASTM E 1693 : 1995 : R2005 | Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets |
| ASTM D 7186 : 2014 : REDLINE | Standard Practice for Quality Assurance Observation of Roof Construction and Repair |
| ASTM E 1186 : 2017 : REDLINE | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
| ASTM E 1080 : 1985 | Practice for Static Load Testing of Wood-Framed Truss Assemblies (Withdrawn 1995) |
| ASTM E 1701 : 1995 : R2012 | Standard Classification for Serviceability of an Office Facility for Manageability |
| ASTM E 489 : 1992 : R1997 | Standard Test Method for Tensile Strength Properties of Metal Connector Plates (Withdrawn 2005) |
| ASTM E 2126 : 2011-07 | TEST METHODS FOR CYCLIC (REVERSED) LOAD TEST FOR SHEAR RESISTANCE OF VERTICAL ELEMENTS OF THE LATERAL FORCE RESISTING SYSTEMS FOR BUILDINGS |
| ASTM E 1670 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance |
| ASTM E 2264 :2005 | Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products |
| ASTM E 1783/E1783M : 1996 : R2013 : EDT 1 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM E 3120 : 2017 | Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings |
| ASTM E 2121 : 2013 : REDLINE | Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings |
| ASTM E 2816 : 2018 : REDLINE | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 1399 : 1997 : R2000 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM E 1666 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
| ASTM E 1334 : 1995 : R2012 | Standard Practice for Rating the Serviceability of a Building or Building-Related Facility (Withdrawn 2013) |
| ASTM E 1745 : 2017 : REDLINE | Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
| ASTM E 2166 : 2016 : REDLINE | Standard Practice for Organizing and Managing Building Data |
| ASTM E 1783 : 1996 : R2000 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM D 7338 : 2014 : REDLINE | Standard Guide for Assessment Of Fungal Growth in Buildings |
| ASTM E 864 : 2012 : REDLINE | Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
| ASTM C 1589/C1589M : 2018 : REDLINE | Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
| ASTM E 2127 : 2001 | Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction |
| ASTM D 779 : 2016 | Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method |
| ASTM E 2619/E2619M : 2017 : REDLINE | Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings |
| ASTM E 621 : 1994 : R1999 : EDT 1 | Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380) (Withdrawn 2008) |
| ASTM E 1677 : 2011 : REDLINE | SPECIFICATION FOR AIR BARRIER (AB) MATERIAL OR SYSTEM FOR LOW-RISE FRAMED BUILDING WALLS |
| ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM E 1613 : 2012 : REDLINE | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| ASTM E 1645 : 2016 : REDLINE | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 546 : 2014 : REDLINE | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units |
| ASTM E 774 : 1997 | Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units (Withdrawn 2006) |
| ASTM E 1553 : 1993 | Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002) |
| ASTM E 998 : 2012 : REDLINE | Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method |
| ASTM E 1644 : 2017 : REDLINE | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM E 1729 : 2016 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
| ASTM E 1726 : 2016 : REDLINE | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1775 : 2016 : REDLINE | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM E 73 : 2013 : REDLINE | Standard Practice for Static Load Testing of Truss Assemblies |
| ASTM E 1728 : 2016 : REDLINE | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 1828 : 2001 | Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (Withdrawn 2010) |
| ASTM E 1186 : 2017 : REDLINE | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
| ASTM E 1423 : 2014 : REDLINE | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
| ASTM E 997 : 2015 : REDLINE | Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing |
| ASTM E 1679 : 2013 : REDLINE | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed |
| ASTM E 1727 : 2016 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
| ASTM C 168 : 2017-06 | TERMINOLOGY RELATING TO THERMAL INSULATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.