ASTM E 329 : 2021
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
Hardcopy , PDF
11-12-2023
English
14-07-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 36
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification defines the minimum requirements for agencies engaged in any of the following:
(a)Inspection of specified methods and materials used in construction,
(b)Special Inspection, and
(c)Testing of materials used in construction.
1.2Criteria are provided for assessing the competence of an agency to properly perform designated inspections, tests, or Special Inspection services. This specification establishes essential characteristics pertaining to the organization, management, personnel, facilities, quality systems, responsibilities, duties, inspection and testing methods, records, and reports of the agency. This specification may be supplemented by more specific criteria and requirements, if required.
1.2.1This specification specifically addresses factors relevant to an agency’s ability to produce precise, accurate test data or determine the conformity of construction activities and materials used in construction with regulations, codes, standards, and approved project plans and specifications containing the requirements against which the inspection or test, or both, will be performed. Specific or general requirements include:
1.2.1.1Facilities and management of the agency,
1.2.1.2Sufficiency and technical competency of personnel,
1.2.1.3Suitability, calibration, and maintenance of equipment,
1.2.1.4Quality system, audit, and review,
1.2.1.5Responsibilities, duties, and authority of agencies,
1.2.1.6Validity and appropriateness of sampling, testing, and inspection methods and procedures,
1.2.1.7Management of records,
1.2.1.8Reporting, review, and transmission of test and inspection data or findings, and
1.2.1.9Specific requirements for identified fields (concrete, soil, etc.).
1.3This specification can be used as a basis to assess an agency and is intended for use in accrediting agencies, public or private, engaged in inspection, testing, and Special Inspection of construction activities and materials used in construction. These services include but are not limited to reinforced concrete, precast concrete, structural steel erection, welding, bolting, soil and rock, foundations, masonry, sprayed fire-resistive materials, fire stops, exterior insulation and finish system (EIFS), and Special Cases. Building officials can use Specification E329 to assess the competency of agencies in the fields covered by Specification E329.
1.4A certificate of accreditation, including the scope of accreditation, is required to comply with this specification.
1.5The users of an accredited agency must review the agency's scope of accreditation to ensure the agency has been accredited for its technical competence to perform the specific inspections or tests requested by the user.
1.6This specification is not intended to:
(a)circumvent or replace the agreement between the agency and the owner that should clearly define the responsibilities and authorities of the agency;
(b)address design requirements that supersede applicable codes, laws, and regulations; or
(c)address construction means, methods, techniques, or sequences.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1077 : 2017 | Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation |
| ASTM A 627 : 2003 : R2019 | Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities |
| ASTM D 3740 : 2019 | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 3666 : 2016 | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM E 2353 : 2021 | Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades |
| ASTM E 699 : 2016 | Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components |
| ASTM E 2833 : 2012 : R2018 | Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection |
| ASTM E 736/E736M : 2019 | Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members |
| ASTM E 2307 : 2020 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM C 1093 : 2019 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
| ASTM E 2307 : 2023 : REV A | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 814 : 2013 : REV A : R2017 | Standard Test Method for Fire Tests of Penetration Firestop Systems |
| ASTM E 814 : 2023 : REV A | Standard Test Method for Fire Tests of Penetration Firestop Systems |
| ASTM E 1513/E1513M : 1993 : R2020 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 543 : 2015 | Standard Specification for Agencies Performing Nondestructive Testing |
| ASTM E 1513/E1513M : 1993 : R2023 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 736/E736M : 2019 : R2023 | Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members |
| ASTM E 814 : 2023 | Standard Test Method for Fire Tests of Penetration Firestop Systems |
| ASTM E 605/E605M : 2019 : R2023 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 2307 : 2023 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 605/E605M : 2019 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM C 1093 : 2023 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2022 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2022 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.