Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 3050 : 2016

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel

Available format(s)

Hardcopy , PDF

Superseded date

22-01-2022

Superseded by

ASTM E 3050 : 2021

Language(s)

English

Published date

14-12-2020

$108.03
Including GST where applicable

CONTAINED IN VOL. 05.06, 2016 Defines denatured ethanol intended to be used as a cooking or appliance fuel, or both.

Committee
E 48
DocumentType
Standard
Pages
2
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

1.1This specification covers denatured ethanol intended to be used as a cooking or appliance fuel, or both.

1.2Nothing in this specification shall preclude observance of federal, state, or local regulations.

1.2.1Denatured ethanol has many regulatory limitations that cover the production, trading, transporting, distributing, wholesale and retail sale, and use of denatured ethanol; this specification does not purport to address the regulatory compliance aspects of these activities.

1.3The addition of a denatonium benzoate is required in addition to any other denaturants that are added.

1.3.1The denatonium benzoate is added as an additional deterrent to consumption. The denatonium benzoate must be added in an amount that meets the minimum and maximum requirements listed in Table 1.

1.4The addition of a colored dye is also required. The colored dye must be added in a concentration sufficient to enable the visual detection of the color in the fuel but in an amount less than the maximum listed in Table 1.

1.4.1The colored dye is added to visually indicate that the product is not potable.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5501 : 1994 : R1998 : EDT 1 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography
ASTM D 7795 : 2012 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
ASTM E 1064 : 2012 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4177 : 2016 : EDT 1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 5501 : 2012 : EDT 1 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
ASTM D 4815 : 2015 : REV B Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 4177 : 1995 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4306 : 1997 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4306 : 2015 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM E 1064 : 2000 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4815 : 2015 : REV B : R2019 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM E 1064 : 2005 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 5854 : 1996 : R2010 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4306 : 2015 : REDLINE Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM E 1064 : 2004 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 5854 : 2019 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4306 : 2001 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4306 : 2007 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 5501 : 2009 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography
ASTM D 5854 : 1996 : R2005 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 7795 : 2015 : REDLINE Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4177 : 2015 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4306 : 2012 : REV A Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4815 : 1999 : EDT 1 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, <I>tertiary</I>-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 5501 : 2012 : R2016 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
ASTM D 4306 : 2012 : REV B Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4815 : 2009 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 4815 : 2015 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 4815 : 2004 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 4815 : 1999 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, <I>tertiary</I>-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 4177 : 1995 : R2010 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM E 1064 : 2008 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4177 : 1995 : R2000 Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM D 5854 : 1996 : R2000 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4815 : 2013 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 4815 : 2003 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 5501 : 2020 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography
ASTM E 1064 : 2004 : REV A Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E 1064 : 2016 : REDLINE Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 4306 : 2013 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 5501 : 2012 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
ASTM D 4177 : 2016 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4306 : 2020 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM E 203 : 2016 : REDLINE Standard Test Method for Water Using Volumetric Karl Fischer Titration
ASTM D 4177 : 1995 : R2005 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7795 : 2015 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
ASTM D 5854 : 2019 : REV A Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4815 : 2015 : REV A Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 4177 : 2015 : REV A Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM E 1064 : 2016 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 5854 : 1996 : R2015 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 5501 : 2004 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography
ASTM D 4306 : 2012 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4306 : 2012 : REV C Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more