ASTM E 30 : 1989
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron (Withdrawn 1995)
Available format(s)
Hardcopy , PDF
Withdrawn date
01-12-1995
Language(s)
English
Published date
31-12-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL 03.05 1996 Covers procedures for analysis of steel, cast iron, open-hearth iron, and wrought iron.
| DevelopmentNote |
Supersedes ASTM A 130, ASTM A 64, ASTM A 55 and ASTM A 33. (03/2002)
|
| DocumentType |
Test Method
|
| Pages |
13
|
| ProductNote |
Supersedes ASTM A 130, ASTM A 64, ASTM A 55 and ASTM A 33. (Manju 03/2002)
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
| Standards | Relationship |
| UNE 7019:1950 | Identical |
| UNE 7014:1950 | Identical |
| ASTM A 381 : 1996 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
| ASTM A 381 : 1996 : R2012 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
| ASTM A 556/A556M : 1996 : R2005 | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
| ASTM A 439 : 1983 : R1999 | Standard Specification for Austenitic Ductile Iron Castings |
| MIL-A-53079 Base Document:1989 | ANCHOR, NAVMOOR CAUSEWAY MOORING |
| ASTM A 874/A874M : 1998 : R2014 | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
| MIL-H-43905 Revision C:1990 | HASP, HIGH SECURITY PADLOCKS |
| ASTM A 254/A254M : 2012 : REDLINE | Standard Specification for Copper-Brazed Steel Tubing |
| ASTM E 701 : 1980 : R2010 | Standard Test Methods for Municipal Ferrous Scrap |
| ASTM A 752 : 2004 : R2010 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel (Withdrawn 2011) |
| ASTM E 701 : 1980 : R1999 | Standard Test Methods for Municipal Ferrous Scrap |
| ASTM A 571/A571M : 2001 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| AWS A5.23/A5.23M : 2011 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| ASTM A 713 : 2004 : R2017 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| ASTM A 905 : 2004 : R2010 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| ASTM A 600 : 1992 : REV A : R2010 | Standard Specification for Tool Steel High Speed |
| ASTM A 571/A571M : 2001 : R2011 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| ASTM A 834 : 1995 : R2001 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM A 874/A874M :1998 | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
| ASTM A 834 : 1995 : R2015 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM A 571/A571M : 2001 : R2006 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| ASTM A 546 : 1982 : EDT 1 | Specification for Steel Wire, Medium-High-Carbon, Cold-Heading Quality, for Hexagon-Head Bolts<med> |
| ASTM C 715 : 1990 : R2016 | Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis (Withdrawn 2021) |
| ASTM C 715 : 1990 : R2000 | Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis |
| ASTM E 35 : 1988 : R2002 | Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys (Withdrawn 2008) |
| QQ-W-461 Revision H:1978 | WIRE, STEEL, CARBON, ROUND, BARE AND COATED |
| ASTM A 254 : 1997 : R2007 | Standard Specification for Copper-Brazed Steel Tubing |
| ASTM C 715 : 1990 : R2006 | Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis |
| ASTM A 549 : 1982 | Specification for Steel Wire, Carbon, Cold-Heading Quality, for Wood Screws<med> |
| ASTM A 556/A556M : 1996 : R2012 | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
| ASTM G 81 : 1997 : REV A : R2013 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM A 557/A557M : 90A | Specification for Electric-Resistance-Welded Carbon Steel Feedwater Heater Tubes (Withdrawn 1995) |
| ASTM A 600 : 1992 : REV A : R2016 | Standard Specification for Tool Steel High Speed |
| ASTM E 485 : 1994 : R2005 | Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique |
| ASTM A 834 : 1995 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM A 439 : 1983 : R2004 | Standard Specification for Austenitic Ductile Iron Castings |
| ASTM E 701 : 1980 : R2018 | Standard Test Methods for Municipal Ferrous Scrap |
| ASTM A 713 : 2004 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| ASTM A 752 : 2004 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel |
| ASTM A 436 : 1984 : R2015 | Standard Specification for Austenitic Gray Iron Castings |
| ASTM E 510 : 1979 | Recommended Practice for Determining Pavement Surface Frictional and Polishing Characteristics Using a Small Torque Device (Withdrawn 1985) |
| ASTM A 436 : 1984 : R1997 : EDT 1 | Standard Specification for Austenitic Gray Iron Castings |
| ASTM A 381 : 1996 : R2005 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
| ASTM A 686 : 1992 : R2004 | Standard Specification for Tool Steel, Carbon |
| ASTM A 681 : 2008 : R2015 | Standard Specification for Tool Steels Alloy |
| ASTM A 510/A510M : 2018 : REDLINE | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel |
| ASTM A 436 : 1984 : R2011 | Standard Specification for Austenitic Gray Iron Castings |
| ASTM A 436 : 1984 : R2020 | Standard Specification for Austenitic Gray Iron Castings |
| ASTM A 874/A874M : 1998 : R2018 : EDT 1 | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
| ASTM A 638/A638M : 2020 | Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service |
| ASTM A 254/A254M : 2012 : R2019 | Standard Specification for Copper-Brazed Steel Tubing |
| ASTM A 571/A571M : 2001 : R2019 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| ASTM A 834 : 1995 : R2020 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM G 81 : 1997 : REV A : R2018 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM A 494/A494M : 2018 : REV A | Standard Specification for Castings, Nickel and Nickel Alloy |
| ASTM A 905 : 2004 : R2017 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| ASTM E 31 : 1985 : R1989 | Methods for Chemical Analysis of Ferroalloys (Withdrawn 1995) |
| ASTM E 404 : 1995 : R2000 : EDT 1 | Standard Test Method for Spectrographic Determination of Boron In Carbon and Low Alloy Steel by the Point-To-Plane Technique (Withdrawn 2006) |
| ASTM F 10 : 1969 : R1986 | Specification for Miniature Electron Tube Leads (Withdrawn 1991) |
| MIL-S-11310 Revision E:1976 | Steel Bars, Carbon, Hot Rolled, For Cold Shaping Including Cold Extrusion |
| ASTM A 439 : 1983 : R2009 | Standard Specification for Austenitic Ductile Iron Castings |
| FF-P-386 Revision D:1971 | PIN, COTTER (SPLIT) |
| ASTM G 81 : 1997 : REV A : R2002 : EDT 1 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM A 686 : 1992 : R2010 | Standard Specification for Tool Steel, Carbon |
| ASTM A 494/A494M : 2017-03 | SPECIFICATION FOR CASTINGS, NICKEL AND NICKEL ALLOY |
| SAE AMS S 11310 : 1998 | STEEL BARS, CARBON, HOT ROLLED, FOR COLD SHAPING, INCLUDING COLD EXTRUSION |
| ASTM A 381 : 1996 : R2001 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
| ASTM A 681:2008 | Standard Specification for Tool Steels Alloy |
| ASTM A 686 : 1992 : R2016 | Standard Specification for Tool Steel, Carbon |
| ASTM G 81 : 1997 : REV A | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM A 600 : 1992 : REV A : R1999 | Standard Specification for Tool Steel High Speed |
| ASTM C 715 : 1990 : R2011 : EDT 1 | Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis |
| ASTM A 254 : 1997 : R2002 | Standard Specification for Copper-Brazed Steel Tubing |
| API 16RCD RUSSIAN : 2005 | SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES |
| ASTM A 436 : 1984 : R2001 | Standard Specification for Austenitic Gray Iron Castings |
| IFI 140 : 2000 | CARBON AND ALLOY STEEL WIRE, RODS AND BARS FOR MECHANICAL FASTENERS |
| ASTM E 403 : 1988 | Method for Optical Emission Spetrometric Analysis of Carbon and Low-Alloy Steel by the Point-To-Plane Technique (Withdrawn 1995) |
| ASTM A 254 : 1997 | Standard Specification for Copper-Brazed Steel Tubing |
| API SPEC 16RCD : 2015 | SPECIFICATION FOR ROTATING CONTROL DEVICES |
| ASTM E 485 : 1994 : R1999 : EDT 1 | Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique |
| ASTM E 701 : 1980 : R2005 | Standard Test Methods for Municipal Ferrous Scrap |
| AASHTO M 275M/M 275 : 2008 : R2012 | SPECIFICATION FOR UNCOATED HIGH-STRENGTH STEEL BARS FOR PRESTRESSING CONCRETE |
| ASTM A 874/A874M : 1998 : R2004 | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
| ASTM A 571/A571M : 2001 : R2015 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| ASTM A 436 : 1984 : R2006 | Standard Specification for Austenitic Gray Iron Castings |
| ASTM A 686 : 1992 : R1999 | Standard Specification for Tool Steel, Carbon |
| ASTM C 715 : 1990 : R1996 | Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis |
| ASTM A 535 : 1985 | Specification for Special-Quality Ball and Roller Bearing Steel (Withdrawn 1998) |
| MIL-S-10520 Revision D:1975 | STEEL, FORGING, FOR PROJECTILE STOCK |
| ASTM A 713 : 2004 : R2010 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| ASTM G 81 : 1997 : REV A : R2007 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| IFI 153 : 2003 | STAINLESS STEEL WIRE AND RODS FOR MECHANICAL FASTENERS |
| ASTM F 1 : 2003 | Standard Specification for Nickel-Clad and Nickel-Plated Steel Strip for Electron Tubes (Withdrawn 2009) |
| ASTM E 35 : 1988 : R1997 | Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys |
| ASTM A 905 : 2004 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| ASTM A 556/A556M : 1996 | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
| ASTM A 874/A874M : 1998 : R2009 | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
| ASTM A 834 : 1995 : R2006 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM A 834 : 1995 : R2011 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM A 556/A556M : 1996 : R2001 | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
| ASTM A 600 : 1992 : REV A : R2004 | Standard Specification for Tool Steel High Speed |
| ASME B18.8.200M : 2000 | COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES) |
| ASME B18.8.200M : 2000 : R2010 | COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES) |
| ASME B18.8.200M : 2000 : R2005 | COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES) |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 352 : 2013-05 | TEST METHODS FOR CHEMICAL ANALYSIS OF TOOL STEELS AND OTHER SIMILAR MEDIUM-AND HIGH-ALLOY STEELS |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.