ASTM E 2635 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation
Hardcopy , PDF
27-12-2022
English
03-08-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 60
|
| DocumentType |
Standard Practice
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1In an effort to help meet growing demands being placed on available water supplies and water treatment facilities, many communities throughout the United States and the world are turning to water reclamation and reuse. Water reclamation and reuse offer an effective means of conserving the Earth’s limited high-quality freshwater supplies while helping to meet the ever growing demands for water in residential, commercial, and institutional development. This practice sets forth a practice for water reuse in buildings and related construction, encompassing both graywater and blackwater in-situ reclamation.
1.1.1This practice specifies parameters for substituting reclaimed water in place of potable water supplies where potable water quality is not required.
1.1.2This practice specifies limitations for use of reclaimed water in-situ. It is not intended for application to the use of reclaimed water delivered from an offsite municipal wastewater treatment facility.
1.1.3This practice specifies performance requirements for in-situ reclaimed water systems. It does not specify particular technology(ies) that must be used. A variety of technologies may satisfy the performance requirements.
1.1.4This practice specifies requirements for water stewardship associated with in-situ water reuse. Consistent with Guide E2432 and for purposes of this practice, water stewardship includes both quantity and quality impacts on water used in buildings.
1.2Implementation of this practice will require professional judgment. Such judgment should be informed by experience with sustainable development, including environmental, economic, and social issues as appropriate to the building use, type, scale, and location.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3.1Exception—Solely SI units are used in Table 1, Table X3.1, and Table X4.1.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM E 2728 : 2019 | Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings |
| ASTM E 2727 : 2018 | Standard Practice for Assessment of Rainwater Quality |
| ASTM E 3136 : 2018 | Standard Guide for Climate Resiliency in Water Resources |
| ASTM D 5128 : 2014 | Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
| ASTM D 4840 : 1999 : R2018 : EDT 1 | Standard Guide for Sample Chain-of-Custody Procedures |
| ASTM E 2432 : 2019 | Standard Guide for General Principles of Sustainability Relative to Buildings |
| ASTM D 1253 : 1986 : R1996 | Standard Test Method for Residual Chlorine in Water |
| ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
| ASTM E 2114 : 2005 | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM D 6569 : 2005 : R2009 | Standard Test Method for On-Line Measurement of pH<sup>1</sup> |
| ASTM D 6698 : 2007 | Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water |
| ASTM D 1253 : 2003 | Standard Test Method for Residual Chlorine in Water |
| ASTM D 5244 : 1992 : R1998 | Standard Practice for Recovery of Enteroviruses from Waters |
| ASTM E 2114 : 2005 : REV A | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM E 2114 : 2019 | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM D 6238 : 1998 : R2011 | Standard Test Method for Total Oxygen Demand in Water |
| ASTM D 5907 : 2018 | Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water |
| ASTM D 5128 : 1990 : R2005 | Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
| ASTM D 5907 : 1996 : REV A | Standard Test Method for Filterable and Nonfilterable Matter in Water |
| ASTM D 1253 : 2014 | Standard Test Method for Residual Chlorine in Water |
| ASTM D 4188 : 1982 : R1999 | Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test |
| ASTM D 5464 : 2011 | Standard Test Method for pH Measurement of Water of Low Conductivity |
| ASTM D 6698 : 2012 | Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water |
| ASTM D 4188 : 2013 | Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water |
| ASTM D 5907 : 2010 | Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water |
| ASTM D 6698 : 2001 | Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water |
| ASTM E 2114 : 2006 : REV A | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM E 2432 : 2005 | Standard Guide for General Principles of Sustainability Relative to Buildings |
| ASTM E 2114 : 2001 | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM D 6238 : 1998 : R2003 | Standard Test Method for Total Oxygen Demand in Water |
| ASTM E 2114 : 2004 | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM E 2114 : 2017 | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM D 6238 : 1998 | Standard Test Method for Total Oxygen Demand in Water |
| ASTM D 5907 : 2009 | Standard Test Method for Filterable and Nonfilterable Matter in Water |
| ASTM D 6569 : 2014 | Standard Test Method for On-Line Measurement of pH (Withdrawn 2023) |
| ASTM D 5244 : 1992 : R2004 | Standard Practice for Recovery of Enteroviruses from Waters (Withdrawn 2013) |
| ASTM D 1253 : 2008 | Standard Test Method for Residual Chlorine in Water |
| ASTM E 2114 : 2008 | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM D 5128 : 1990 : R1999 : EDT 1 | Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
| ASTM D 6698 : 2014 | Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water (Withdrawn 2023) |
| ASTM D 6734 : 2001 : R2009 | Standard Test Method for Low Levels of Coliphages in Water (Withdrawn 2015) |
| ASTM E 2432 : 2011 | Standard Guide for General Principles of Sustainability Relative to Buildings |
| ASTM D 1253 : 2014 : R2021 : EDT 1 | Standard Test Method for Residual Chlorine in Water |
| ASTM E 2114 : 2006 | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM D 6734 : 2001 | Standard Test Method for Low Levels of Coliphages in Water |
| ASTM D 5907 : 2013 | Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water |
| ASTM D 6569 : 2005 | Standard Test Method for On-Line Measurement of pH<sup>1</sup> |
| ASTM D 5907 : 2003 | Standard Test Method for Filterable and Nonfilterable Matter in Water |
| ASTM D 888 : 1992 : R1996 | Standard Test Methods for Dissolved Oxygen in Water |
| ASTM D 4188 : 2017 | Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water |
| ASTM D 5464 : 2007 | Standard Test Method for pH Measurement of Water of Low Conductivity |
| ASTM E 2114 : 2021 | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM D 5128 : 2014 : R2022 | Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
| ASTM D 5128 : 2009 | Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
| ASTM D 4188 : 2008 | Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test |
| ASTM D 4188 : 1982 : R2003 | Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test |
| ASTM D 5464 : 1993 : R2001 | Standard Test Methods for pH Measurement of Water of Low Conductivity |
| ASTM D 6238 : 1998 : R2017 | Standard Test Method for Total Oxygen Demand in Water |
| ASTM E 2114 : 2000 : REV A | Standard Terminology for Sustainability Relative to the Performance of Buildings |
| ASTM D 5464 : 2016 | Standard Test Method for pH Measurement of Water of Low Conductivity |
| ASTM D 6569 : 2000 | Standard Test Method for On-Line Measurement of pH<sup>1</sup> |
| ASTM E 2432 : 2017 | Standard Guide for General Principles of Sustainability Relative to Buildings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.