ASTM E 2586 : 2019 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Calculating and Using Basic Statistics
Available format(s)
Hardcopy , PDF
Superseded date
12-11-2024
Superseded by
Language(s)
English
Published date
01-04-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 11
|
| DocumentType |
Standard Practice
|
| Pages |
22
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers methods and equations for computing and presenting basic statistics. This practice includes simple descriptive statistics for variable and attribute data, elementary methods of statistical inference, and tabular and graphical methods for variable data. Some interpretation and guidance for use is also included.
1.2The system of units for this practice is not specified. Dimensional quantities in the practice are presented only as illustrations of calculation methods. The examples are not binding on products or test methods treated.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1970 : 2016 | Standard Practice for Statistical Treatment of Thermoanalytical Data |
| ASTM D 4821 : 2019 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM C 1783 : 2015 | Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications |
| ASTM D 2936 : 2020 | Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens |
| ASTM E 2709 : 2019 | Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure |
| ASTM E 2862 : 2018 | Standard Practice for Probability of Detection Analysis for Hit/Miss Data |
| ASTM D 7954/D7954M : 2015 : REV A | Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners |
| ASTM D 3967 : 2016 | Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens |
| ASTM E 2489 : 2016 | Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs |
| ASTM E 2782 : 2017 | Standard Guide for Measurement Systems Analysis (MSA) |
| ASTM E 178 : 2016 : REV A | Standard Practice for Dealing With Outlying Observations |
| ASTM E 2935 : 2017 | Standard Practice for Conducting Equivalence Testing in Laboratory Applications |
| ASTM E 2762 : 2010 : R2020 | Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL |
| ASTM E 2234 : 2009 : R2018 | Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL |
| ASTM E 177 : 2019 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM E 2655 : 2014 : R2020 | Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods |
| ASTM E 3023 : 2015 | Standard Practice for Probability of Detection Analysis for <emph type="bdit"><?Pub _font FamName="Times New Roman"?>â<?Pub /_font?></emph> Versus <emph type="bdit">a</emph> Data |
| ASTM C 1793 : 2015 | Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications |
| ASTM E 3080 : 2019 | Standard Practice for Regression Analysis with a Single Predictor Variable |
| ASTM C 1832 : 2016 | Standard Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer |
| ASTM E 1488 : 2012 : R2018 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM C 1871 : 2018 : REV A | Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer |
| ASTM E 2334 : 2009 : R2018 | Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Response in the Sample |
| ASTM E 141 : 2010 : R2018 | Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
| ASTM F 3079 : 2014 : R2020 | Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities |
| ASTM C 170/C170M : 2024 : REV A | Standard Test Method for Compressive Strength of Dimension Stone |
| ASTM D 7954/D7954M : 2022 : REV A | Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Nondestructive Electrical Impedance Scanners |
| ASTM E 1970 : 2023 | Standard Practice for Statistical Treatment of Thermoanalytical Data |
| ASTM D 7372 : 2021 | Standard Guide for Analysis and Interpretation of Proficiency Test Program Results |
| ASTM E 2862 : 2023 | Standard Practice for Probability of Detection Analysis for Hit/Miss Data |
| ASTM E 2555 : 2021 : EDT 1 | Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection |
| ASTM D 3967 : 2023 | Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens with Flat Loading Platens |
| ASTM C 1783 : 2015 : R2024 | Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications |
| ASTM C 880/C880M : 2024 | Standard Test Method for Flexural Strength of Dimension Stone |
| ASTM E 2334 : 2009 : R2023 | Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Response in the Sample |
| ASTM D 4821 : 2020 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
| ASTM E 2782 : 2017 : R2022 : EDT 1 | Standard Guide for Measurement Systems Analysis (MSA) |
| ASTM E 3239 : 2021 | Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing |
| ASTM C 1871 : 2022 | Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer |
| ASTM E 3418 : 2023 : EDT 1 | Standard Practice for Calculating Scientifically Justifiable Limits of Residues for Cleaning of Pharmaceutical and Medical Device Manufacturing Equipment and for Medical Devices |
| ASTM E 3181 : 2024 | Standard Practice for Determination of the Converted Fraction of Starch and Cellulosic Content From a Fuel Ethanol Production Facility |
| ASTM C 1832 : 2023 | Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer |
| ASTM E 3327/E3327M : 2021 | Standard Guide for the Qualification and Control of the Assisted Defect Recognition of Digital Radiographic Test Data |
| ASTM C 1215 : 2024 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
| ASTM E 3023 : 2021 | Standard Practice for Probability of Detection Analysis for <emph type="bdit"><?Pub _font FamName="Times New Roman"?>â<?Pub /_font?></emph> Versus <emph type="bdit">a</emph> Data |
| ASTM D 8314 : 2020 | Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping |
| ASTM E 177 : 2020 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM E 2935 : 2021 | Standard Practice for Evaluating Equivalence of Two Testing Processes |
| ASTM E 2489 : 2021 | Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs |
| ASTM D 7282 : 2024 | Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements |
| ASTM D 7783 : 2021 | Standard Practice for Within-laboratory Quantitation Estimation (WQE) |
| ASTM E 531 : 2024 | Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials |
| ASTM E 1488 : 2023 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM C 1793 : 2015 : R2024 | Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications |
| ASTM E 141 : 2010 : R2023 | Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
| ASTM D 6693/D6693M : 2020 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
| ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 3080 : 2023 | Standard Practice for Regression Analysis with a Single Predictor Variable |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 2282 : 2023 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 178 : 2021 | Standard Practice for Dealing With Outlying Observations |
| ASTM E 178 : 2000 | Standard Practice for Dealing With Outlying Observations |
| ASTM E 178 : 1994 | Standard Practice for Dealing With Outlying Observations |
| ASTM E 2282 : 2014 : R2019 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 2282 : 2014 : R2023 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 2234 : 2009 : R2023 | Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.