ASTM E 255 : 2023
Current
Current
The latest, up-to-date edition.
Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
26-06-2023
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 01
|
| DocumentType |
Standard Practice
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice describes the sampling of copper (except electrolytic cathode) and copper alloys in either cast or wrought form for the determination of composition.
1.2Cast products may be in the form of cake, billet, wire bar, ingot, ingot bar, or casting.
1.3Wrought products may be in the form of flat, pipe, tube, rod, bar, shape, or forging.
1.4This practice is not intended to supersede or replace existing specification requirements for the sampling of a particular material.
1.5The values stated in SI units are to be regarded as standard. The values in parentheses are given for information only.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement appears in Appendix X4.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM B 131 : 2022 | Standard Specification for Copper Alloy Bullet Jacket Cups |
| ASTM E2972 : 2015(2019) | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
| ASTM B 121/B121M : 2023 | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 248M : 2022 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric) |
| ASTM B 395/B395M : 2018 | Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes |
| ASTM E 2824 : 2018 : REV A | Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry |
| ASTM B 944 : 2022 | Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510) |
| ASTM B 587 : 2019 | Standard Specification for Welded Brass Tube |
| ASTM B 67 : 2014 : R2022 | Standard Specification for Car and Tender Journal Bearings, Lined |
| ASTM B 360 : 2020 | Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications |
| ASTM B 306 : 2020 | Standard Specification for Copper Drainage Tube (DWV) |
| ASTM B 359/B359M : 2018 | Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B 837 : 2019 | Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems |
| ASTM B 194 : 2022 | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 584 : 2022 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM B 608 : 2018 | Standard Specification for Welded Copper-Alloy Pipe |
| ASTM B 956 : 2019 : EDT 1 | Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins |
| ASTM B 372 : 2022 | Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube |
| ASTM B 743 : 2023 | Standard Specification for Seamless Copper Tube in Coils |
| ASTM B 251/B251M : 2017 | Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
| ASTM B 747 : 2020 | Standard Specification for Copper-Zirconium Alloy Sheet and Strip |
| ASTM B 66 : 2015 : R2021 | Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts |
| ASTM B 694 : 2019 | Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding |
| ASTM B 43 : 2020 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
| ASTM B 919 : 2019 | Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement |
| ASTM B 592 : 2020 | Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 467 : 2014 : R2022 | Standard Specification for Welded Copper-Nickel Pipe |
| ASTM B 5 : 2022 | Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes |
| ASTM B 643 : 2018 | Standard Specification for Copper-Beryllium Alloy Seamless Tube |
| ASTM B 447 : 2012 : REV A : R2021 | Standard Specification for Welded Copper Tube |
| ASTM B 248 : 2022 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 302 : 2017 | Standard Specification for Threadless Copper Pipe, Standard Sizes |
| ASTM E 478 : 2008 : R2017 | Standard Test Methods for Chemical Analysis of Copper Alloys |
| ASTM B 543/B543M : 2018 | Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube |
| ASTM B 315 : 2019 | Standard Specification for Seamless Copper Alloy Pipe and Tube |
| ASTM B 569 : 2019 | Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing |
| ASTM B 937 : 2018 | Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510) |
| ASTM B 250/B250M : 2019 | Standard Specification for General Requirements for Wrought Copper Alloy Wire |
| ASTM B 505/B505M : 2022 | Standard Specification for Copper Alloy Continuous Castings |
| ASTM B 824 : 2017 | Standard Specification for General Requirements for Copper Alloy Castings |
| ASTM B 903 : 2015 : R2022 | Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement |
| ASTM B 30 : 2023 | Standard Specification for Copper Alloys in Ingot and Other Remelt Forms |
| ASTM B 88M : 2020 | Standard Specification for Seamless Copper Water Tube (Metric) |
| ASTM B 427 : 2021 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM B 552 : 2019 | Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants |
| ASTM B 75/B75M : 2020 | Standard Specification for Seamless Copper Tube |
| ASTM B 706 : 2018 | Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube |
| ASTM B 122/B122M : 2020 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 103/B103M : 2019 | Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 508 : 2022 | Standard Specification for Copper Alloy Strip for Flexible Metal Hose |
| ASTM E 1282 : 2021 | Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials |
| ASTM B 130 : 2019 | Standard Specification for Commercial Bronze Strip for Bullet Jackets |
| ASTM B 188 : 2015 : EDT 1 | Standard Specification for Seamless Copper Bus Pipe and Tube |
| ASTM B 768 : 2022 | Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet |
| ASTM B 176 : 2018 | Standard Specification for Copper-Alloy Die Castings |
| ASTM B 100 : 2020 | Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use |
| ASTM B 640 : 2012 : REV A : R2021 | Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service |
| ASTM B 42 : 2020 | Standard Specification for Seamless Copper Pipe, Standard Sizes |
| ASTM B 19 : 2020 | Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks |
| ASTM B 111/B111M : 2018 : REV A | Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock |
| ASTM B 88 : 2022 | Standard Specification for Seamless Copper Water Tube |
| ASTM B 379 : 2020 | Standard Specification for Phosphorized Coppers—Refinery Shapes |
| ASTM B 249/B249M : 2022 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings |
| ASTM E 88 : 2011 : R2017 | Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition |
| ASTM B 370 : 2022 | Standard Specification for Copper Sheet and Strip for Building Construction |
| ASTM B 216 : 2022 | Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes |
| ASTM B 170 : 1999 : R2020 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM B 1003 : 2016 | Standard Specification for Seamless Copper Tube for Linesets |
| ASTM B 171/B171M : 2018 | Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers |
| ASTM B 819 : 2019 | Standard Specification for Seamless Copper Tube for Medical Gas Systems |
| ASTM B 1014 : 2020 | Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s) |
| ASTM B 280 : 2020 | Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
| ASTM B 187/B187M : 2020 | Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes |
| ASTM B 644 : 2011 : R2017 | Standard Specification for Copper Alloy Addition Agents |
| ASTM B 68/B68M : 2019 | Standard Specification for Seamless Copper Tube, Bright Annealed |
| ASTM B 129 : 2022 | Standard Specification for Cartridge Brass Cartridge Case Cups |
| ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2024 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.