ASTM E 2374 : 2016 : R2021
Current
The latest, up-to-date edition.
Standard Guide for Acoustic Emission System Performance Verification
Hardcopy , PDF
English
15-11-2021
Committee |
E 07
|
DocumentType |
Guide
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1System performance verification methods launch stress waves into the examination article on which the sensor is mounted. The resulting stress wave travels in the examination article and is detected by the sensor(s) in a manner similar to acoustic emission.
1.2This guide describes methods which can be used to verify the response of an Acoustic Emission system including sensors, couplant, sensor mounting devices, cables and system electronic components.
1.3Acoustic emission system performance characteristics, which may be evaluated using this document, include some waveform parameters, and source location accuracy.
1.4Performance verification is usually conducted prior to beginning the examination.
1.5Performance verification can be conducted during the examination if there is any suspicion that the system performance may have changed.
1.6Performance verification may be conducted after the examination has been completed.
1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 2191/E2191M : 2016 | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
ASTM E 2075/E2075M : 2015 : R2020 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
ASTM E 1139/E1139M : 2017 | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
ASTM E 2478 : 2011 : R2016 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
ASTM E 1419/E1419M : 2015 : REV A : R2020 | Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission |
ASTM E 1930/E1930M : 2017 | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
ASTM E 2907/E2907M : 2013 : R2019 | Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
ASTM E 569/E569M : 2020 | Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
ASTM E 2598/E2598M : 2013 | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
ASTM E 1932 : 2012 : R2017 | Standard Guide for Acoustic Emission Examination of Small Parts |
ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1888/E1888M : 2017 | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
ASTM E 1067/E1067M : 2018 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
ASTM E 3100 : 2017 | Standard Guide for Acoustic Emission Examination of Concrete Structures |
ASTM E 2076/E2076M : 2015 | Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
ASTM E 1211/E1211M : 2017 | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
ASTM E 1316 : 2022 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 976 : 2015 : R2021 | Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response |
ASTM E 1316 : 2024 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2024 | Standard Terminology for <?Pub Dtl?>Nondestructive Examinations |
ASTM E 1316 : 2021 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2022 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2024 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 : REV B | Standard Terminology for Nondestructive Examinations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.