ASTM E 2148 : 2021
Current
The latest, up-to-date edition.
Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
Hardcopy , PDF
English
09-11-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 34
|
| DocumentType |
Guide
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide covers information on how to use documents related to health and safety of metalworking and metal removal fluids. As such, this guide will provide the user with sufficient background information to effectively use the documents listed in Section 2. Documents referenced in this guide are grouped as applicable to producers, to users or to all.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 2693 : 2019 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
| ASTM E 1497 : 2017 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
| ASTM E 2523 : 2013 : R2018 | Standard Terminology for Metalworking Fluids and Operations |
| ASTM F 86 : 2021 | Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
| ASTM E 1687 : 2019 | Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
| ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
| ASTM E 1497 : 2023 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
| ASTM E 2889 : 2023 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
| ASTM E 2564 : 2018 | Standard Practice for Enumeration of <emph type="bdit">Mycobacteria</emph> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
| ASTM D 7049 : 2017 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
| ASTM E 2564 : 2023 | Standard Practice for Enumeration of <emph type="ital">Mycobacteria</emph> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
| ASTM E 1302 : 2013 : R2017 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
| ASTM E 2523 : 2023 | Standard Terminology for Metalworking Fluids and Operations |
| ASTM E 1302 : 2023 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
| ASTM E 2563 : 2023 | Standard Practice for Enumeration of Non-Tuberculosis <emph type="ital">Mycobacteria</emph > in Aqueous Metalworking Fluids by Plate Count Method |
| ASTM D 7049 : 2024 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
| ASTM E 2657 : 2021 | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
| ASTM E 2694 : 2021 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
| ASTM E 2169 : 2022 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
| ASTM E 2169 : 2017 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
| ASTM E 2563 : 2018 | Standard Practice for Enumeration of Non-Tuberculosis <emph type="bdit">Mycobacteria</emph > in Aqueous Metalworking Fluids by Plate Count Method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.