ASTM E 2024/E2024M : 2011 : R2019
Current
The latest, up-to-date edition.
Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
Hardcopy , PDF
English
01-06-2019
1.1 This practice covers procedures for detecting the sources of gas leaking at the rate of 1 × 10–5 Pa m3/s (1 × 10–4 standard cm3/s) or greater.
Committee |
E 07
|
DocumentType |
Standard Practice
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This practice covers procedures for detecting the sources of gas leaking at the rate of 1 × 10 –5 Pa m3/s (1 × 10–4 standard cm3/s) or greater. The tests may be conducted on any object that can be pressurized with a tracer gas that is detectable by a thermal conductivity detector. The test sensitivity will vary widely depending on the tracer gas used.
1.2Units—The values stated in either SI or std-cc/sec units are to be regarded separately as standard. The values stated in each system may not be exact equivalents: therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1316 : 2022 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2011 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2015 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2009 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2008 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2010 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2020 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2017 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2000 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1316 : 2019 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2014 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2024 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2018 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2011 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2015 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2019 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2000 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2019 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2001 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2003 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2018 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2024 | Standard Terminology for <?Pub Dtl?>Nondestructive Examinations |
ASTM E 1316 : 2006 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 543 : 2015 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1316 : 2016 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2002 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2014 : EDT 1 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2010 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2022 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2017 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2016 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2009 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2002 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2004 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2010 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2005 | Standard Terminology for Nondestructive Testing |
ASTM E 1316 : 2004 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2024 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2012 | Standard Terminology for Nondestructive Examinations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.