ASTM E 1792 : 2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
Hardcopy , PDF
17-04-2024
English
29-09-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 22
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers requirements for wipes that are used to collect settled dusts on surfaces for the subsequent determination of lead.
1.2For wipe materials used for the determination of beryllium in surface dust refer to Specification D7707. This is mentioned to insure that users of wipes recognize that there is some relationship between the analytical backgrounds found in wipes and the analyte of interest.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 2913/E2913M : 2021 | Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples |
| ASTM D 7659 : 2021 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
| ASTM D 8344 : 2020 | Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids |
| ASTM E 1775 : 2020 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM E 2271/E2271M : 2022 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings |
| ASTM D 6785 : 2020 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 1979 : 2021 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM E 1728/E1728M : 2024 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 2914/E2914M : 2021 | Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM D 7822 : 2018 | Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids |
| ASTM D 6966 : 2018 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
| ASTM E 3203 : 2021 | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM E 2239 : 2020 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
| ASTM E 1605 : 2022 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1644 : 2021 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM D 7707 : 2021 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
| ASTM E 1644 : 2017 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM E 3203 : 2019 : REV A | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM E 3193 : 2021 | Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
| ASTM E 3193 : 2023 | Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS) |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 1728 : 1999 | Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques |
| ASTM E 105 : 2021 | Standard Guide for Probability Sampling of Materials |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM F 141 : 2012 : R2020 | Standard Terminology Relating to Resilient Floor Coverings |
| ASTM E 2239 : 2024 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 3193 : 2020 | Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
| ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 105 : 2016 | Standard Practice for Probability Sampling of Materials |
| ASTM D 7707 : 2011 : R2016 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
| ASTM F 141 : 2023 | Standard Terminology Relating to Resilient Floor Coverings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.