ASTM E 179 : 2017 : R2022
Current
The latest, up-to-date edition.
Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
Hardcopy , PDF
English
04-11-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 12
|
| DocumentType |
Guide
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide is intended for use in selecting terminology, measurement scales, and instrumentation for describing or evaluating such appearance characteristics as glossiness, opacity, lightness, transparency, and haziness in terms of reflected or transmitted light. This guide does not consider the spectral variations responsible for color, but the geometric variables described herein can importantly affect instrumentally measured values of color. This guide is general in scope rather than specific as to instrument or material.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 8087 : 2018 | Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry |
| ASTM E 1164 : 2012 : R2017 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 2153 : 2001 : R2017 | Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM E 1348 : 2015 : EDT 1 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 6290 : 2019 | Standard Test Method for Color Determination of Plastic Pellets |
| ASTM E 1331 : 2015 : R2019 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 430 : 2019 | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM D 4960 : 2020 | Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials |
| ASTM E 1347 : 2006 : R2020 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 2205 : 2020 | Standard Guide for Selection of Tests for Traffic Paints |
| ASTM D 5548 : 2013 : R2020 | Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings) |
| ASTM C 1510 : 2001 : R2020 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM D 7195 : 2021 | Standard Guide for Setting Object Color Specifications |
| ASTM E 991 : 2021 | Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
| ASTM C 1649 : 2014 : R2021 | Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated |
| ASTM C 1650 : 2014 : R2021 | Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated |
| ASTM E 2808 : 2021 : REV A | Standard Guide for Microspectrophotometry in Forensic Paint Analysis |
| ASTM G 73 : 2010 : R2021 | Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus |
| ASTM E 805 : 2022 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM D 5386 : 2016 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM E 284 : 2017 | Standard Terminology of Appearance |
| ASTM D 1455 : 2017 | Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish |
| ASTM D 1494 : 2022 | Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels |
| ASTM C 346 : 1987 : R2018 | Standard Test Method for 45-deg Specular Gloss of Ceramic Materials (Withdrawn 2023) |
| ASTM D 1746 : 2023 | Standard Test Method for Transparency of Plastic Sheeting |
| ASTM D 1455 : 2017 : R2023 | Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish |
| ASTM E 1331 : 2015 : R2023 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 4039 : 2009 : R2015 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM E 284 : 2022 | Standard Terminology of Appearance |
| ASTM E 808 : 2023 | Standard Practice for Describing Retroreflection |
| ASTM E 1348 : 2022 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 808 : 2001 : R2016 | Standard Practice for Describing Retroreflection |
| ASTM E 1767 : 2011 : R2017 | Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials |
| ASTM E 430 : 2023 | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
| ASTM E 1348 : 2015 : EDT 1 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1164 : 2012 : R2023 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1767 : 2011 : R2022 | Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials |
| ASTM D 1494 : 2017 | Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels |
| ASTM E 1164 : 2023 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 1746 : 2015 | Standard Test Method for Transparency of Plastic Sheeting |
| ASTM D 4039 : 2009 : R2023 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM E 1349 : 2006 : R2022 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM E 284 : 2017 | Standard Terminology of Appearance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.