ASTM E 1621 : 2013 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry
01-07-2021
English
01-10-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 03.05, 2015 Gives guidelines for developing and describing analytical procedures using a wavelength dispersive X-ray spectrometer for elemental analysis of solid metals, ores, and related materials.
| Committee |
E 01
|
| DocumentType |
Redline
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This guide provides guidelines for developing and describing analytical procedures using a wavelength dispersive X-ray spectrometer for elemental analysis of solid metals, ores, and related materials. Material forms discussed herein include solids, powders, and solid forms prepared by chemical and physical processes such as borate fusion and pressing of briquettes.
1.2Liquids are not discussed in this guide because they are much less frequently encountered in metals and mining laboratories. However, aqueous liquids can be processed by borate fusion to create solids specimens, and X-ray spectrometers can be equipped to handle liquids directly.
1.3Some provisions of this guide may be applicable to the use of an energy dispersive X-ray spectrometer.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM E 2437 : 2005 | Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2014) |
| I.S. EN 62321-3-1:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-1: SCREENING - LEAD, MERCURY, CADMIUM, TOTAL CHROMIUM AND TOTAL BROMINE BY X-RAY FLUORESCENCE SPECTROMETRY |
| ASTM E 572 : 2013 : REDLINE | Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 2626 : 2008 | Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals |
| ASTM D 7085 : 2004 : EDT 1 | Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF) |
| EN 62321-3-1:2014 | Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry |
| ASTM F 3273 : 2017 | Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
| ASTM E 2626 : 2008 : EDT 1 | Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals (Withdrawn 2017) |
| ASTM E 305 : 2013 : REDLINE | Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves |
| ASTM E 1085 : 2016 : REDLINE | Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| BS EN 62321-3-1:2014 | Determination of certain substances in electrotechnical products Screening. Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry |
| ASTM D 7751 : 2016 : REDLINE | Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis |
| IWA 8:2009 | Tableware, giftware, jewellery, luminaries Glass clarity Classification and test method |
| ASTM D 7085 : 2004 : R2018 | Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF) |
| ASTM D 8127 : 2017 : EDT 1 | Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants |
| ASTM F 2980 : 2013 | Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF) |
| ASTM D 5929 : 2018 : REDLINE | Standard Test Method for Determining Biodegradability of Materials Exposed to Source-Separated Organic Municipal Solid Waste Mesophilic Composting Conditions by Respirometry |
| ASTM D 6247 : 2010 | Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| SAE AMS 2280 : 2012 | TRACE ELEMENT CONTROL, NICKEL ALLOY CASTINGS |
| SAE ARP 1313 : 2014 | DETERMINATION OF TRACE ELEMENTS IN HIGH TEMPERATURE ALLOYS |
| ASTM F 2980 : 2013 : R2017 | Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF) |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM D 7085 : 2004 | Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF) |
| ASTM D 7085 : 2004 : R2010 : EDT 1 | Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF) |
| ASTM E 322 : 2012 : REDLINE | Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| IEC 62321:2008 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
| ASTM D 8127 : 2017 | Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants |
| 10/30229251 DC : 0 | BS EN 62321-3-1 ED 1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTRO TECHNICAL PRODUCTS - PART 3-1: SCREENING ELECTRO TECHNICAL PRODUCTS FOR LEAD, MERCURY, CADMIUM, TOTAL CHROMIUM AND TOTAL BROMINE USING X-RAY FLUORESCENCE SPECTROMETRY |
| BS EN 62321:2009 | Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
| I.S. EN 62321:2009 | ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS) |
| EN 62321:2009 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
| ASTM E 1601 : 2012 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 1257 : 2016 : REDLINE | Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.