ASTM E 1510 : 1995 : R2021
Current
The latest, up-to-date edition.
Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
Hardcopy , PDF
English
21-04-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 13
|
| DocumentType |
Standard Practice
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice covers the installation and maintenance of fused silica capillary columns in gas chromatographs that are already retrofitted for their use. This practice excludes information on:
1.1.1Injection techniques.
1.1.2Column selection.
1.1.3Data acquisition.
1.1.4System troubleshooting and maintenance.
1.2For additional information on gas chromatography, please refer to Practice E260. For specific precautions, see 7.2.2.2(1), 7.2.2.2(2), 7.2.7, and 7.2.7.2.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific safety information, see Section 6, 7.2.2.2(1), 7.2.2.2(2), 7.2.7, and 7.2.7.2.2
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1642 : 2000 : R2016 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
| ASTM D 5060 : 2012 : R2021 : EDT 1 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
| ASTM D 7266 : 2013 : R2018 : EDT 1 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard) |
| ASTM D 5599 : 2018 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection |
| ASTM D 2163 : 2014 : R2019 | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography |
| ASTM D 3525 : 2020 | Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography |
| ASTM D 6142 : 2016 | Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography |
| ASTM D 6144 : 2017 | Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography |
| ASTM D 7833 : 2020 | Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography |
| ASTM D 7213 : 2015 : R2019 | Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography |
| ASTM D 6730 : 2019 | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography |
| ASTM D 7920 : 2021 | Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography |
| ASTM D 7807 : 2020 | Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection |
| ASTM D 7798 : 2020 | Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC) |
| ASTM D 5501 : 2020 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography |
| ASTM D 6160 : 1998 : R2017 | Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography |
| ASTM D 5917 : 2015 : R2019 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 5713 : 2014 : R2018 : EDT 1 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography |
| ASTM D 4735 : 2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
| ASTM E 697 : 1996 : R2019 | Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography |
| ASTM D 6352 : 2019 : EDT 1 | Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography |
| ASTM D 7593 : 2014 | Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography |
| ASTM D 7057 : 2018 | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard) |
| ASTM D 3524 : 2014 : R2020 | Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
| ASTM D 3760 : 2018 | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (Withdrawn 2022) |
| ASTM E 1747 : 1995 : R2019 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM D 5135 : 2021 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
| ASTM D 8003 : 2015 : REV A : R2021 | Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography |
| ASTM D 7922 : 2014 | Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography |
| ASTM D 7164 : 2010 : R2015 | Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography |
| ASTM D 7500 : 2015 : R2019 | Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography |
| ASTM E 202 : 2018 | Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols |
| ASTM D 7169 : 2020 : EDT 1 | Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography |
| ASTM D 7096 : 2019 | Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography |
| ASTM D 6417 : 2015 : R2019 | Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography |
| ASTM D 7871 : 2019 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number) |
| ASTM D 7398 : 2011 : R2016 | Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography |
| ASTM D 7360 : 2016 | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration (Withdrawn 2023) |
| ASTM D 3465 : 2014 | Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography |
| ASTM D 7011 : 2015 : R2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
| ASTM E 355 : 1996 : R2021 : EDT 1 | Standard Practice for Gas Chromatography Terms and Relationships |
| ASTM E 355 : 1996 : R2014 | Standard Practice for Gas Chromatography Terms and Relationships |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.