ASTM E 1316 : 2024 : REV B
Current
The latest, up-to-date edition.
Standard Terminology for Nondestructive Examinations
Hardcopy , PDF
English
01-07-2024
Committee |
E 07
|
DocumentType |
Reference Material
|
Pages |
42
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This standard covers the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gamma- and X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods.
1.2Committee E07 recognizes that the terms examination, testing, and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the terms examination or inspection and their derivatives when describing the application of nondestructive test methods. In a specific standard, either examination or inspection shall be used consistently throughout the document. Similarly, E07 encourages the use of the term test and its derivatives when referring to the body of knowledge of a nondestructive testing method. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.)
Note 1:The following sentences clarify this policy and illustrate its use:
(a)Nondestructive testing methods are used extensively for the examination or inspection of materials and components.
(b)The E07 Committee on Nondestructive Testing has prepared many documents to promote uniform usage of the nondestructive testing methods that are applied to examine or inspect materials and components.
(c)Radiologic Testing (RT) is often used to inspect material to detect internal discontinuities.
(d) Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT), and Visual Testing (VT) are often used to examine the surface of a component.
(e)The Bubble Leak Testing (BLT) method is sometimes used to leak test a pressure containing component to detect leaks.
(f) A guide for Nondestructive Testing of additively manufactured materials will describe several methods but a practice will focus on a single inspection method.
1.3Section A defines terms that are common to multiple NDT methods, whereas the subsequent sections define terms pertaining to specific NDT methods.
1.4As shown on the chart below, when a nondestructive examination or inspection produces an indication, the indication is subject to interpretation as false, nonrelevant, or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the words used in the chart are defined in Section A.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1961 : 2016 : R2021 | Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
ASTM E 1025 : 2018 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography |
ASTM E 746 : 2023 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems below 4 MeV |
ASTM A 418/A418M : 2024 | Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
ASTM E 1312 : 2018 | Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
ASTM E 588 : 2003 : R2020 | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
ASTM E 709 : 2021 | Standard Guide for Magnetic Particle Testing |
ASTM E 1543 : 2014 : R2022 | Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems |
ASTM E 390 : 2020 | Standard Reference Radiographs for Steel Fusion Welds |
ASTM E 2023 : 2022 | Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators |
ASTM E 3375 : 2023 | Standard Practice for Cone Beam Computed Tomographic (CT) Examination |
ASTM E 1416 : 2023 | Standard Practice for Radioscopic Examination of Weldments |
ASTM E 446 : 2020 | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ASTM A 456/A456M : 2024 | Standard Specification for Magnetic Particle Examination of Large Crankshaft<brk/> Forgings |
ASTM E 1210 : 2021 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
ASTM E 155 : 2020 | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
ASTM E 2001 : 2018 | Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts |
ASTM E 2884 : 2022 | Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays |
ASTM E 1000 : 2016 | Standard Guide for Radioscopy |
ASTM F 3674 : 2024 | Standard Practice for Additive Manufacturing – Part Grades for Automotive |
ASTM E 1418 : 2021 | Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
ASTM E 1936 : 2020 | Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems |
ASTM E 2582 : 2021 | Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications |
ASTM E 2669 : 2022 | Standard Digital Reference Images for Titanium Castings |
ASTM E 2698 : 2018 : EDT 1 | Standard Practice for Radiographic Examination Using Digital Detector Arrays |
ASTM E 1897 : 2014 : R2022 | Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers |
ASTM E 2929 : 2018 : R2022 | Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction |
ASTM E 3179 : 2018 | Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil |
ASTM E 2930 : 2013 : R2021 | Standard Practice for Pressure Decay Leak Test Method |
ASTM E 2984/E2984M : 2021 | Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
ASTM E 1444/E1444M : 2022 : REV A | Standard Practice for Magnetic Particle Testing for Aerospace |
ASTM E 3168 : 2020 : REV A | Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters |
ASTM E 1065/E1065M : 2020 | Standard Practice for Evaluating Characteristics of Ultrasonic Search Units |
ASTM E 747 : 2024 | Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiography |
ASTM E 2096/E2096M : 2022 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
ASTM E 2661/E2661M : 2020 : EDT 1 | Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications |
ASTM A 578/A578M : 2017 : R2023 | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
ASTM E 2073 : 2024 | Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings |
ASTM E 165/E165M : 2023 | Standard Practice for Liquid Penetrant Testing for General Industry |
ASTM E 1324 : 2021 | Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments |
ASTM E 2007 : 2010 : R2023 | Standard Guide for Computed Radiography |
ASTM E 1208 : 2021 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
ASTM E 2033/E2033M : 2024 | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
ASTM E 2736 : 2017 : R2022 | Standard Guide for Digital Detector Array Radiography |
ASTM E 3185 : 2021 | Standard Digital Reference Images for Tin Bronze Castings |
ASTM E 2928/E2928M : 2023 | Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique |
ASTM E 797/E797M : 2021 | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
ASTM E 1441 : 2019 | Standard Guide for Computed Tomography (CT) |
ASTM E 3024/E3024M : 2022 : REV A | Standard Practice for Magnetic Particle Testing for General Industry |
ASTM E 664/E664M : 2015 : R2020 : EDT 1 | Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
ASTM E 1817 : 2008 : R2022 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM F 1430/F1430M : 2020 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
ASTM C 597 : 2022 | Standard Test Method for Ultrasonic Pulse Velocity Through Concrete |
ASTM E 2767 : 2024 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods |
ASTM E 431 : 1996 : R2022 | Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices |
ASTM E 2868 : 2022 | Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness |
ASTM E 1002 : 2011 : R2022 | Standard Practice for Leaks Using Ultrasonics |
ASTM E 2445/E2445M : 2020 | Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems |
ASTM E 1955 : 2020 | Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM <astmref rid="a00002"/> Reference Radiographs |
ASTM E 94/E94M : 2022 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
ASTM E 1419/E1419M : 2015 : REV A : R2020 | Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission |
ASTM E 2981 : 2021 | Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 2861 : 2016 : R2020 | Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams |
ASTM C 1740 : 2016 | Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method |
ASTM E 2223 : 2013 : R2022 | Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
ASTM E 802 : 2021 | Standard Reference Radiographs for Gray Iron Castings Up to 4<fraction><num>1</num><den>2</den> </fraction> in. (114 mm) in Thickness |
ASTM E 2192 : 2013 : R2022 | Standard Guide for Planar Flaw Height Sizing by Ultrasonics |
ASTM E 2775 : 2016 : R2023 | Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction |
ASTM A 435/A435M : 2017 : R2023 | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
ASTM E 1815 : 2018 : R2023 | Standard Test Method for Classification of Film Systems for Industrial Radiography |
ASTM E 2598/E2598M : 2021 | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
ASTM E 1816 : 2018 : R2022 | Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) Methods |
ASTM E 2971 : 2016 : R2020 | Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements |
ASTM E 1932 : 2012 : R2022 | Standard Guide for Acoustic Emission Examination of Small Parts |
ASTM E 1931 : 2016 : R2022 | Standard Guide for Non-computed X-Ray Compton Scatter Tomography |
ASTM E 1736 : 2015 : R2022 | Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
ASTM E 999 : 2020 | Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
ASTM E 2339 : 2021 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
ASTM E 213 : 2022 | Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |
ASTM E 493/E493M : 2011 : R2022 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
ASTM E 1079 : 2021 | Standard Practice for Calibration of Transmission Densitometers |
ASTM E 1004 : 2023 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM E 2700 : 2020 | Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
ASTM E 2374 : 2016 : R2021 | Standard Guide for Acoustic Emission System Performance Verification |
ASTM E 3147 : 2018 | Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems |
ASTM E 1417/E1417M : 2021 : EDT 1 | Standard Practice for Liquid Penetrant Testing |
ASTM E 1930/E1930M : 2017 | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
ASTM E 1685 : 2020 | Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique |
ASTM E 3267 : 2021 | Standard Guide for Building Information Models and Archiving for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
ASTM E 127 : 2020 | Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks |
ASTM E 2699 : 2023 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital X-ray (DX) Test Methods |
ASTM E 587 : 2015 : R2020 | Standard Practice for Ultrasonic Angle-Beam Contact Testing |
ASTM E 3044/E3044M : 2022 | Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints |
ASTM E 650/E650M : 2017 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
ASTM E 2581 : 2014 : R2023 | Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
ASTM E 1606 : 2020 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
ASTM E 498/E498M : 2011 : R2022 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
ASTM E 192 : 2020 | Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications |
ASTM E 1067/E1067M : 2018 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
ASTM C 1624 : 2022 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
ASTM E 3030 : 2019 : EDT 1 | Standard Digital Reference Images for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
ASTM E 3052 : 2021 | Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array |
ASTM E 2003 : 2020 | Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators |
ASTM E 3327/E3327M : 2021 | Standard Guide for the Qualification and Control of the Assisted Defect Recognition of Digital Radiographic Test Data |
ASTM E 1647 : 2016 : R2022 | Standard Practice for Determining Contrast Sensitivity in Radiology |
ASTM E 3081 : 2021 | Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts |
ASTM E 2973 : 2022 | Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings |
ASTM A 275/A275M : 2023 | Standard Practice for Magnetic Particle Examination of Steel Forgings |
ASTM E 2905/E2905M : 2020 | Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods |
ASTM E 2982 : 2021 | Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 3045 : 2022 | Standard Practice for Crack Detection Using Vibroacoustic Thermography |
ASTM E 2934 : 2023 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods |
ASTM E 2534 : 2020 | Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts |
ASTM E 2338 : 2022 | Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards |
ASTM E 2072 : 2024 | Standard Specification for Photoluminescent (Phosphorescent) Safety Markings |
ASTM E 2191/E2191M : 2016 | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
ASTM E 2478 : 2011 : R2022 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
ASTM E 2375 : 2022 | Standard Practice for Ultrasonic Testing of Wrought Products |
ASTM E 2869 : 2017 | Standard Digital Reference Images for Magnesium Castings |
ASTM E 1814 : 2014 : R2022 | Standard Practice for Computed Tomographic (CT) Examination of Castings |
ASTM E 1135 : 2019 : R2024 | Standard Test Method for Comparing the Brightness of Fluorescent Penetrants |
ASTM E 1255 : 2023 | Standard Practice for Radioscopy |
ASTM C 215 : 2019 | Standard Test Method for Fundamental Transverse, Longitudinal, and<brk/> Torsional Resonant Frequencies of Concrete Specimens |
ASTM E 2373/E2373M : 2019 | Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
ASTM F 640 : 2023 | Standard Test Methods for Determining Radiopacity for Medical Use |
ASTM E 164 : 2019 | Standard Practice for Contact Ultrasonic Testing of Weldments |
ASTM E 426 : 2016 : R2021 | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
ASTM E 1495/E1495M : 2017 | Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
ASTM E 273 : 2020 | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
ASTM E 309 : 2016 | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
ASTM E 376 : 2019 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods |
ASTM E 3102 : 2018 | Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application |
ASTM E 1475 : 2013 : R2023 | Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data |
ASTM E 1211/E1211M : 2017 | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
ASTM E 1118/E1118M : 2016 : R2020 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
ASTM E 592 : 2020 | Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates <fraction><num>1</num><den>4 </den> </fraction> to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with <brk/>Cobalt-60 |
ASTM E 1862 : 2014 : R2022 | Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers |
ASTM E 2863 : 2017 | Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization |
ASTM E 1735 : 2019 : R2024 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV |
ASTM E 2261/E2261M : 2017 : R2021 | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
ASTM E 749/E749M : 2017 : R2021 | Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
ASTM E 1648 : 2020 | Standard Reference Radiographs for Examination of Aluminum Fusion Welds |
ASTM E 2907/E2907M : 2013 : R2019 | Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
ASTM A 388/A388M : 2023 | Standard Practice for Ultrasonic Examination of Steel Forgings |
ASTM E 1219 : 2021 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
ASTM E 186 : 2020 | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
ASTM E 2662 : 2015 : R2022 | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM E 215 : 2022 | Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
ASTM E 1774 : 2017 : R2022 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 571 : 2024 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
ASTM E 499/E499M : 2011 : R2017 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode<rangeref></rangeref > |
ASTM E 3170/E3170M : 2018 : R2023 | Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints |
ASTM E 2904 : 2022 | Standard Practice for Characterization and Verification of Linear Phased Array Ultrasonic Probes |
ASTM E 751/E751M : 2017 : R2022 | Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
ASTM E 801 : 2021 | Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices |
ASTM E 1001 : 2021 | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
ASTM E 2738 : 2023 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods |
ASTM E 2297 : 2023 | Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods |
ASTM E 3169 : 2018 | Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
ASTM E 3135 : 2018 | Standard Practice for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation Against Microorganisms on Carriers with Simulated Soil |
ASTM E 2906/E2906M : 2018 : R2022 | Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles |
ASTM E 3167/E3167M : 2018 : R2023 | Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints |
ASTM E 1742/E1742M : 2023 | Standard Practice for Radiographic Examination |
ASTM E 689 : 2020 | Standard Reference Radiographs for Ductile Iron Castings |
ASTM E 2660 : 2022 | Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
ASTM E 3353 : 2022 | Standard Guide for In-Process Monitoring Using Optical and Thermal Methods for Laser Powder Bed Fusion |
ASTM E 1030/E1030M : 2021 | Standard Practice for Radiographic Examination of Metallic Castings |
ASTM E 3101 : 2018 | Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints |
ASTM E 1213 : 2014 : R2022 | Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging Systems |
ASTM E 505 : 2022 | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
ASTM E 1220 : 2021 | Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
ASTM E 703 : 2020 | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
ASTM E 1320 : 2020 | Standard Reference Radiographs for Titanium Castings |
ASTM A 531/A531M : 2024 | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
ASTM E 280 : 2021 | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
ASTM E 1901 : 2023 | Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
ASTM E 1571 : 2021 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
ASTM E 2422 : 2022 | Standard Digital Reference Images for Inspection of Aluminum Castings |
ASTM A 745/A745M : 2024 | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings |
ASTM F 2895 : 2020 | Standard Practice for Digital Radiography of Cast Metallic Implants |
ASTM E 1139/E1139M : 2017 | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
ASTM E 3398 : 2023 | Standard Guide for Digital Neutron Radiography |
ASTM E 2663 : 2023 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods |
ASTM E 3388 : 2023 | Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy for High Energy Applications |
ASTM E 494 : 2020 | Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method |
ASTM E 1114 : 2020 | Standard Test Method for Determining the Size of Iridium-192, Cobalt-60, and Selenium-75 Industrial Radiographic Sources |
ASTM E 569/E569M : 2020 | Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
ASTM E 317 : 2021 | Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments |
ASTM E 2076/E2076M : 2015 : R2022 | Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
ASTM A 577/A577M : 2017 : R2023 | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
ASTM E 1411 : 2023 | Standard Practice for Qualification of Radioscopic Systems |
ASTM C 1331 : 2018 : R2023 | Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
ASTM B 891/B891M : 2019 : R2024 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer |
ASTM E 1209 : 2018 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
ASTM E 1311 : 2014 : R2022 | Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems |
ASTM E 748 : 2019 | Standard Guide for Thermal Neutron Radiography of Materials |
ASTM E 1962 : 2024 | Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
ASTM E 2533 : 2021 | Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications |
ASTM E 2104 : 2022 | Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
ASTM E 3213 : 2019 | Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts |
ASTM E 3022 : 2018 | Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing |
ASTM E 3100 : 2022 | Standard Guide for Acoustic Emission Examination of Concrete Structures |
ASTM E 1390 : 2021 | Standard Specification for Illuminators Used for Viewing Industrial Radiographs |
ASTM E 1672 : 2012 : R2020 | Standard Guide for Computed Tomography (CT) System Selection |
ASTM E 3397 : 2023 | Standard Practice for Resonance Testing Using the Impulse Excitation Method |
ASTM E 1935 : 1997 : R2019 | Standard Test Method for Calibrating and Measuring CT Density |
ASTM E 1888/E1888M : 2017 | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
ASTM E 1161 : 2021 | Standard Practice for Radiographic Examination of Semiconductors and Electronic Components |
ASTM E 1934 : 1999 : REV A : R2024 | Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography |
ASTM E 1695 : 2020 : EDT 1 | Standard Test Method for Measurement of Computed Tomography (CT) System Performance |
ASTM E 803 : 2020 | Standard Test Method for Determining the <emph type="ital">L/D </emph>Ratio of Neutron Radiography Beams |
ASTM E 1106 : 2012 : R2021 | Standard Test Method for Primary Calibration of Acoustic Emission Sensors |
ASTM B 886 : 2024 | Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides |
ASTM E 1629 : 2012 : R2020 | Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
ASTM E 310 : 2021 | Standard Reference Radiographs for Tin Bronze Castings |
ASTM E 3166 : 2020 : EDT 1 | Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build |
ASTM E 2983 : 2014 : R2019 | Standard Guide for Application of Acoustic Emission for Structural Health Monitoring |
ASTM C 1383 : 2023 | Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method |
ASTM E 243 : 2024 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes |
ASTM E 2862 : 2023 | Standard Practice for Probability of Detection Analysis for Hit/Miss Data |
ASTM E 2985/E2985M : 2014 : R2019 | Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy |
ASTM E 2446 : 2024 | Standard Practice for Manufacturing Characterization of Computed Radiography Systems |
ASTM F 3187 : 2016 : R2023 | Standard Guide for Directed Energy Deposition of Metals |
ASTM E 1781/E1781M : 2020 | Standard Practice for Secondary Calibration of Acoustic Emission Sensors |
ASTM E 272 : 2021 | Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
ASTM E 570 : 2020 | Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products |
ASTM A 788/A788M : 2023 | Standard Specification for Steel Forgings, General Requirements |
ASTM E 2002 : 2022 | Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy |
ASTM E 515 : 2011 : R2022 | Standard Practice for Leaks Using Bubble Emission Techniques |
ASTM D 7006 : 2023 | Standard Practice for Ultrasonic Testing of Geomembranes |
ASTM E 543 : 2021 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 114 : 2020 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
ASTM E 1933 : 2014 : R2022 | Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers |
ASTM C 1332 : 2018 : R2023 | Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
ASTM E 1734 : 2023 | Standard Practice for Radioscopic Examination of Castings |
ASTM E 545 : 2019 | Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
ASTM E 2597/E2597M : 2022 | Standard Practice for Manufacturing Characterization of Digital Detector Arrays |
ASTM E 2024/E2024M : 2011 : R2019 | Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
ASTM E 750 : 2015 : R2020 | Standard Practice for Characterizing Acoustic Emission Instrumentation |
ASTM E 1254 : 2013 : R2023 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
ASTM E 690 : 2015 : R2020 | Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
ASTM E 2580 : 2024 | Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM E 1032 : 2019 | Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film |
ASTM E 432 : 1991 : R2022 | Standard Guide for Selection of a Leak Testing Method |
ASTM E 566 : 2024 | Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals |
ASTM E 2479 : 2016 : R2021 | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves |
ASTM E 2737 : 2023 | Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability |
ASTM E 1603/E1603M : 2011 : R2022 | Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
ASTM E 3023 : 2021 | Standard Practice for Probability of Detection Analysis for <emph type="bdit"><?Pub _font FamName="Times New Roman"?>â<?Pub /_font?></emph> Versus <emph type="bdit">a</emph> Data |
ASTM E 242 : 2015 : R2020 | Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed |
ASTM E 2491 : 2023 | Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems |
ASTM E 1066/E1066M : 2019 : R2024 | Standard Practice for Ammonia Colorimetric Leak Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.