ASTM E 1316 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology for Nondestructive Examinations
Hardcopy , PDF
11-11-2014
English
01-12-2012
Committee |
E 07
|
DocumentType |
Reference Material
|
Pages |
37
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This standard defines the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gamma- and X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods.
1.2Committee E07 recognizes that the terms examination, testing and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the term examination and its derivatives when describing the application of nondestructive test methods. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.)
1.3Section A defines terms that are common to multiple NDT methods, whereas, the subsequent sections define terms pertaining to specific NDT methods.
1.4As shown on the chart below, when nondestructive testing produces an indication, the indication is subject to interpretation as false, nonrelevant or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the words used in the chart are defined in Section A.
ASTM E 273 : 2015 | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
ASTM E 2597/E2597M : 2014 | Standard Practice for Manufacturing Characterization of Digital Detector Arrays |
ASTM E 751/E751M : 2017 | Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
ASTM E 2478 : 2011 : R2016 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
ASTM E 2479 : 2016 | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves |
ASTM E 3052 : 2016 | Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array |
ASTM C 1331 : 2018 | Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
ASTM E 94/E94M : 2017 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
ASTM E 1814 : 2014 | Standard Practice for Computed Tomographic (CT) Examination of Castings |
ASTM E 2861 : 2016 | Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams |
ASTM E 2581 : 2014 | Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
ASTM E 1066/E1066M : 2019 | Standard Practice for Ammonia Colorimetric Leak Testing |
ASTM E 2985/E2985M : 2014 : R2019 | Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy |
ASTM E 2660 : 2017 | Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
ASTM E 1324 : 2016 | Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments |
ASTM E 186 : 2015 | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
ASTM E 1672 : 2012 | Standard Guide for Computed Tomography (CT) System Selection |
ASTM E 2297 : 2015 | Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods |
ASTM B 886 : 2019 | Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides |
ASTM E 1079 : 2016 | Standard Practice for Calibration of Transmission Densitometers |
ASTM E 749/E749M : 2017 | Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
ASTM E 1932 : 2012 : R2017 | Standard Guide for Acoustic Emission Examination of Small Parts |
ASTM E 3135 : 2018 | Standard Practice for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation Against Microorganisms on Carriers with Simulated Soil |
ASTM E 1418 : 2016 | Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
ASTM E 1139/E1139M : 2017 | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
ASTM E 1961 : 2016 | Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
ASTM E 2661/E2661M : 2015 | Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications |
ASTM E 1208 : 2016 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
ASTM E 1817 : 2008 : R2014 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 498/E498M : 2011 : R2017 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
ASTM A 578/A578M : 2017 | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
ASTM F 2895 : 2015 | Standard Practice for Digital Radiography of Cast Metallic Implants |
ASTM E 2024/E2024M : 2011 : R2019 | Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
ASTM E 1004 : 2017 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM C 215 : 2014 | Standard Test Method for Fundamental Transverse, Longitudinal, and<brk/> Torsional Resonant Frequencies of Concrete Specimens |
ASTM E 1734 : 2016 : REV A | Standard Practice for Radioscopic Examination of Castings |
ASTM E 2669 : 2016 : EDT 1 | Standard Digital Reference Images for Titanium Castings |
ASTM E 1220 : 2016 | Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
ASTM E 426 : 2016 | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
ASTM E 2868 : 2017 | Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness |
ASTM E 1158 : 2014 | Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material (Withdrawn 2019) |
ASTM E 566 : 2019 | Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals |
ASTM E 2338 : 2017 | Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards |
ASTM E 2662 : 2015 | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM E 1209 : 2018 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
ASTM E 748 : 2019 | Standard Guide for Thermal Neutron Radiography of Materials |
ASTM E 3170/E3170M : 2018 | Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints |
ASTM E 2984/E2984M : 2014 | Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
ASTM E 2767 : 2013 : R2018 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods |
ASTM E 570 : 2015 : EDT 1 | Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products |
ASTM E 3213 : 2019 | Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts |
ASTM E 1955 : 2004 : R2014 | Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM <astmref rid="a00002"/> Reference Radiographs |
ASTM E 2904 : 2017 | Standard Practice for Characterization and Verification of Phased Array Probes |
ASTM E 2737 : 2010 : R2018 | Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability |
ASTM E 3022 : 2018 | Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing |
ASTM E 2775 : 2016 | Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction |
ASTM E 2533 : 2017 : EDT 1 | Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications |
ASTM E 2422 : 2017 | Standard Digital Reference Images for Inspection of Aluminum Castings |
ASTM E 1888/E1888M : 2017 | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
ASTM E 428 : 2008 : R2013 | Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing (Withdrawn 2019) |
ASTM E 3100 : 2017 | Standard Guide for Acoustic Emission Examination of Concrete Structures |
ASTM E 1255 : 2016 | Standard Practice for Radioscopy |
ASTM E 3023 : 2015 | Standard Practice for Probability of Detection Analysis for <emph type="bdit"><?Pub _font FamName="Times New Roman"?>â<?Pub /_font?></emph> Versus <emph type="bdit">a</emph> Data |
ASTM E 3024/E3024M : 2019 | Standard Practice for Magnetic Particle Testing for General Industry |
ASTM E 2003 : 2010 : R2014 | Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators |
ASTM E 446 : 2015 | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ASTM E 1417/E1417M : 2016 | Standard Practice for Liquid Penetrant Testing |
ASTM E 1025 : 2018 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography |
ASTM E 1931 : 2016 | Standard Guide for Non-computed X-Ray Compton Scatter Tomography |
ASTM E 272 : 2015 | Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
ASTM E 2929 : 2018 | Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction |
ASTM F 640 : 2012 | Standard Test Methods for Determining Radiopacity for Medical Use |
ASTM E 2261/E2261M : 2017 | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
ASTM E 1312 : 2018 | Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
ASTM E 1606 : 2015 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
ASTM E 1411 : 2016 | Standard Practice for Qualification of Radioscopic Systems |
ASTM E 2023 : 2019 | Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators |
ASTM E 499/E499M : 2011 : R2017 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode<rangeref></rangeref > |
ASTM E 432 : 1991 : R2017 : EDT 1 | Standard Guide for Selection of a Leak Testing Method |
ASTM E 569/E569M : 2013 | Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
ASTM E 1033 : 2013 | Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature (Withdrawn 2019) |
ASTM C 597 : 2016 | Standard Test Method for Pulse Velocity Through Concrete |
ASTM F 1430/F1430M : 2018 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
ASTM B 891/B891M : 2019 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer |
ASTM E 3169 : 2018 | Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
ASTM E 1695 : 1995 : R2013 | Standard Test Method for Measurement of Computed Tomography (CT) System Performance |
ASTM E 650/E650M : 2017 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
ASTM E 2973 : 2015 | Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings |
ASTM E 493/E493M : 2011 : R2017 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
ASTM E 999 : 2015 | Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
ASTM E 1067/E1067M : 2018 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
ASTM C 1624 : 2005 : R2015 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
ASTM E 664/E664M : 2015 | Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
ASTM F 1512 : 1994 : R2011 | Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies (Withdrawn 2020) |
ASTM E 1648 : 2015 | Standard Reference Radiographs for Examination of Aluminum Fusion Welds |
ASTM E 2930 : 2013 | Standard Practice for Pressure Decay Leak Test Method |
ASTM E 587 : 2015 | Standard Practice for Ultrasonic Angle-Beam Contact Testing |
ASTM D 7006 : 2003 : R2013 | Standard Practice for Ultrasonic Testing of Geomembranes |
ASTM C 1332 : 2018 | Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
ASTM E 3167/E3167M : 2018 | Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints |
ASTM E 1030/E1030M : 2015 | Standard Practice for Radiographic Examination of Metallic Castings |
ASTM E 280 : 2015 | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
ASTM E 1065/E1065M : 2014 | Standard Guide for Evaluating Characteristics of Ultrasonic Search Units |
ASTM E 3101 : 2018 | Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints |
ASTM E 1647 : 2016 | Standard Practice for Determining Contrast Sensitivity in Radiology |
ASTM E 1935 : 1997 : R2013 | Standard Test Method for Calibrating and Measuring CT Density |
ASTM E 2863 : 2017 | Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization |
ASTM E 2907/E2907M : 2013 : R2019 | Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
ASTM E 1219 : 2016 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
ASTM E 2738 : 2018 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods |
ASTM E 2073 : 2019 | Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings |
ASTM E 1390 : 2012 : R2016 | Standard Specification for Illuminators Used for Viewing Industrial Radiographs |
ASTM E 588 : 2003 : R2014 | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
ASTM E 165/E165M : 2018 | Standard Practice for Liquid Penetrant Testing for General Industry |
ASTM E 2884 : 2017 | Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays |
ASTM E 2700 : 2014 | Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
ASTM E 1816 : 2018 | Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) Methods |
ASTM E 2374 : 2016 | Standard Guide for Acoustic Emission System Performance Verification |
ASTM E 309 : 2016 | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
ASTM E 376 : 2019 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods |
ASTM E 3102 : 2018 | Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application |
ASTM E 1736 : 2015 | Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
ASTM E 1211/E1211M : 2017 | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
ASTM E 592 : 2015 | Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates <fraction><num>1</num><den>4 </den></fraction> to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with <brk/>Cobalt-60 |
ASTM E 1106 : 2012 : R2017 | Standard Test Method for Primary Calibration of Acoustic Emission Sensors |
ASTM E 317 : 2016 | Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments |
ASTM E 709 : 2015 | Standard Guide for Magnetic Particle Testing |
ASTM E 2104 : 2015 | Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
ASTM E 2191/E2191M : 2016 | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
ASTM E 2007 : 2010 : R2016 | Standard Guide for Computed Radiography |
ASTM E 2869 : 2017 | Standard Digital Reference Images for Magnesium Castings |
ASTM E 1114 : 2009 : R2014 | Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources |
ASTM E 703 : 2014 | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
ASTM E 164 : 2019 | Standard Practice for Contact Ultrasonic Testing of Weldments |
ASTM E 2446 : 2016 | Standard Practice for Manufacturing Characterization of Computed Radiography Systems |
ASTM E 1629 : 2012 | Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
ASTM E 243 : 2018 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes |
ASTM E 1495/E1495M : 2017 | Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
ASTM E 1962 : 2014 | Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
ASTM E 2598/E2598M : 2013 | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
ASTM E 505 : 2015 | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
ASTM A 435/A435M : 2017 | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
ASTM E 1815 : 2018 | Standard Test Method for Classification of Film Systems for Industrial Radiography |
ASTM E 1603/E1603M : 2011 : R2017 | Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
ASTM E 1441 : 2011 | Standard Guide for Computed Tomography (CT) Imaging |
ASTM E 2971 : 2016 | Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements |
ASTM E 2375 : 2016 | Standard Practice for Ultrasonic Testing of Wrought Products |
ASTM E 2033 : 2017 | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
ASTM E 2928/E2928M : 2017 | Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique |
ASTM E 2002 : 2015 | Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy |
ASTM E 1416 : 2016 : REV A | Standard Practice for Radioscopic Examination of Weldments |
ASTM E 2076/E2076M : 2015 | Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
ASTM E 2534 : 2015 | Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts |
ASTM E 242 : 2015 | Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed |
ASTM E 2223 : 2013 : R2018 : EDT 1 | Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
ASTM E 689 : 2015 | Standard Reference Radiographs for Ductile Iron Castings |
ASTM E 127 : 2015 | Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks |
ASTM E 545 : 2014 | Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
ASTM E 3147 : 2018 | Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems |
ASTM E 1930/E1930M : 2017 | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
ASTM E 3045 : 2016 | Standard Practice for Crack Detection Using Vibroacoustic Thermography |
ASTM E 1901 : 2018 | Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
ASTM E 2373/E2373M : 2014 | Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
ASTM E 155 : 2015 | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
ASTM E 2072 : 2014 | Standard Specification for Photoluminescent (Phosphorescent) Safety Markings (Withdrawn 2023) |
ASTM E 2339 : 2015 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) |
ASTM E 1419/E1419M : 2015 : REV A | Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission |
ASTM E 1001 : 2016 | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
ASTM E 1774 : 2017 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 390 : 2015 | Standard Reference Radiographs for Steel Fusion Welds |
ASTM E 801 : 2016 | Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices |
ASTM C 1383 : 2015 | Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method |
ASTM E 1685 : 2013 | Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique |
ASTM E 2862 : 2018 | Standard Practice for Probability of Detection Analysis for Hit/Miss Data |
ASTM F 3187 : 2016 | Standard Guide for Directed Energy Deposition of Metals |
ASTM E 2906/E2906M : 2018 | Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles |
ASTM E 690 : 2015 | Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
ASTM E 310 : 2015 | Standard Reference Radiographs for Tin Bronze Castings |
ASTM E 1735 : 2007 : R2014 | Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV |
ASTM E 1118/E1118M : 2016 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
ASTM E 114 : 2015 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
ASTM E 2445/E2445M : 2014 | Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems |
ASTM E 1444/E1444M : 2016 : EDT 1 | Standard Practice for Magnetic Particle Testing |
ASTM E 571 : 2012 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
ASTM C 1740 : 2016 | Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method |
ASTM E 747 : 2018 | Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology |
ASTM E 1000 : 2016 | Standard Guide for Radioscopy |
ASTM E 1161 : 2009 : R2014 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
ASTM A 577/A577M : 2017 | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
ASTM E 746 : 2018 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems |
ASTM E 2699 : 2018 | Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods |
ASTM E 1571 : 2011 : R2016 : EDT 1 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
ASTM E 213 : 2014 : EDT 1 | Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |
ASTM E 1742/E1742M : 2018 | Standard Practice for Radiographic Examination |
ASTM D 1746 : 2015 | Standard Test Method for Transparency of Plastic Sheeting |
ASTM E 2096/E2096M : 2016 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
ASTM E 750 : 2015 | Standard Practice for Characterizing Acoustic Emission Instrumentation |
ASTM E 3081 : 2016 | Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts |
ASTM E 2337/E2337M : 2010 : R2015 | Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing (Withdrawn 2020) |
ASTM E 1936 : 2015 | Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems |
ASTM E 192 : 2015 | Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications |
ASTM E 802 : 2015 | Standard Reference Radiographs for Gray Iron Castings Up to 4<fraction><num>1</num><den>2</den> </fraction> in. (114 mm) in Thickness |
ASTM E 494 : 2015 | Standard Practice for Measuring Ultrasonic Velocity in Materials |
ASTM E 2580 : 2017 | Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM E 1210 : 2016 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
ASTM E 215 : 2016 | Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
ASTM E 431 : 1996 : R2016 | Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices |
ASTM E 2001 : 2018 | Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts |
ASTM E 543 : 2015 | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 2698 : 2018 : EDT 1 | Standard Practice for Radiographic Examination Using Digital Detector Arrays |
ASTM E 797/E797M : 2015 | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
ASTM E 3179 : 2018 | Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil |
ASTM E 1320 : 2015 | Standard Reference Radiographs for Titanium Castings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.