Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 119 : 2024

Current

Current

The latest, up-to-date edition.

Standard Test Methods for Fire Tests of Building Construction and Materials

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-05-2024

$147.32
Including GST where applicable

Committee
E 05
DocumentType
Test Method
Pages
36
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1The test methods described in this fire-test-response standard are applicable to assemblies of masonry units and to composite assemblies of structural materials for buildings, including loadbearing and other walls and partitions, columns, girders, beams, slabs, and composite slab and beam assemblies for floors and roofs. They are also applicable to other assemblies and structural units that constitute permanent integral parts of a finished building.

1.2It is the intent that classifications shall register comparative performance to specific fire-test conditions during the period of exposure and shall not be construed as having determined suitability under other conditions or for use after fire exposure.

1.3This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products or assemblies under actual fire conditions.

1.4These test methods prescribe a standard fire exposure for comparing the test results of building construction assemblies. The results of these tests are one factor in assessing predicted fire performance of building construction and assemblies. Application of these test results to predict the performance of actual building construction requires the evaluation of test conditions.

1.5The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.

1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.8The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E 2634 : 2018 : R2022 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
ASTM C 1795 : 2017 : R2024 Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
ASTM E 2785 : 2014 : R2022 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
ASTM E 814 : 2024 Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM E 1513/E1513M : 1993 : R2023 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
ASTM E 1966 : 2015 : R2019 Standard Test Method for Fire-Resistive Joint Systems
ASTM F 3059 : 2018 Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
ASTM E 2749 : 2023 : REV A Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E 2336 : 2020 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM E 2536 : 2021 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM D 7470 : 2021 Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs
ASTM E 759/E759M : 1992 : R2023 Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E 859/E859M : 2023 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
ASTM E 937/E937M : 1993 : R2023 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
ASTM C 1825 : 2019 Standard Guide for Developing Specifications for Masonry Units
ASTM D 5456 : 2021 : EDT 1 Standard Specification for Evaluation of Structural Composite Lumber Products
ASTM D 7374 : 2021 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
ASTM C 1396/C1396M : 2017 Standard Specification for Gypsum Board
ASTM C 1177/C1177M : 2024 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
ASTM D 8391 : 2022 : EDT 1 Standard Specification for Demonstrating Equivalent Fire Performance for Wood-Based Floor Framing Members to Unprotected 2 by 10 Dimension Lumber or Equal-Sized Structural Composite Lumber
ASTM E 2816 : 2020 : REV A Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 761/E761M : 1992 : R2023 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E 1725 : 2023 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM E 1512 : 2001 : R2023 Standard Test Methods for Testing Bond Performance of Bonded Anchors
ASTM E 2912 : 2017 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
ASTM C 887 : 2020 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
ASTM D 8484 : 2023 Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials Used as Exterior Wall Coverings
ASTM E 2750 : 2023 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM E814
ASTM D 4000 : 2023 Standard Classification System for Specifying Plastic Materials
ASTM E 3048 : 2022 : REV A Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM D 6513 : 2021 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
ASTM E 176 : 2024 Standard Terminology of Fire Standards
ASTM C 1178/C1178M : 2024 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
ASTM E 3134 : 2020 Standard Specification for Transportation Tunnel Structural Components and Passive Fire Protection Systems
ASTM E 3057 : 2019 Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
ASTM E 2924 : 2014 : R2020 Standard Practice for Intumescent Coatings
ASTM E 2032 : 2021 Standard Practice for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E 2874 : 2023 Standard Test Method for Determining the Fire-Test Response Characteristics of a Building Spandrel-Panel Assembly Due to External Spread of Fire
ASTM C 1278/C1278M : 2024 Standard Specification for Fiber-Reinforced Gypsum Panel
ASTM E 736/E736M : 2019 : R2023 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
ASTM E 2837 : 2023 : REV A Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
ASTM C 926 : 2024 Standard Specification for Application of Portland Cement-Based Plaster
ASTM C 1852 : 2020 Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
ASTM C 1423 : 2021 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
ASTM C 1766 : 2015(R2019) Standard Specification for Factory-Laminated Gypsum Panel Products
ASTM E 1529 : 2022 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E 2307 : 2023 : REV B Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E 2061 : 2023 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 3037 : 2020 Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems
ASTM E 605/E605M : 2019 : R2023 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
ASTM E 2226 : 2023 : REV A Standard Practice for Application of Hose Stream
ASTM E 2748 : 2023 Standard Guide for Fire-Resistance Experiments
ASTM E 2568 : 2017 : REV A Standard Specification for PB Exterior Insulation and Finish Systems
ASTM C 11 : 2024 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM E 760/E760M : 1992 : R2023 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E 3385 : 2024 Standard Practice for On-Site Inspection of Fire Resistive Duct Systems
ASTM D 7746 : 2021 Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests
ASTM E 3157 : 2023 Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems
ASTM E 1494 : 2018 Standard Practice for Testing Physical Properties of Friable Surfacing Materials

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more