ASTM E 1137 : 1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Industrial Platinum Resistance Thermometers
Superseded date
11-11-2014
Superseded by
Published date
10-11-1997
Sorry this product is not available in your region.
CONTAINED IN VOL. 14.03, 2001 Lays down requirements for industrial platinum resistance thermometers (PRTs) suitable for immersion in the medium whose temperature is to be measured. Covers PRTs suitable for all or part of the temperature range from -200 to +650 Deg C.
| Committee |
E 20
|
| DocumentType |
Standard
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This specification covers the requirements for metal-sheathed industrial platinum resistance thermometers (PRT's) suitable for direct immersion temperature measurement. It applies to PRT's with an average temperature coefficient of resistance between 0 and 100°C of 0.385%/°C and nominal resistance at 0°C of 100 [omega] or other specified value. This specification covers PRT's suitable for all or part of the temperature range -200 to 650°C. The resistance-temperature relationship and tolerances are specified as well as physical, performance, and testing requirements.
1.2 The values of temperature in this specification are based on the International Temperature Scale of 1990 (ITS-90) .
| ASTM D 97 : 2017 : REV B | Standard Test Method for Pour Point of Petroleum Products |
| ASTM D 6821 : 2018 | Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer |
| ASTM D 3934 : 2014 | Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus |
| ASTM E 2623 : 2014 | Standard Practice for Reporting Thermometer Calibrations |
| ASTM D 1310 : 2014 | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
| ASTM D 3829 : 2018 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
| ASTM D 4684 : 2018 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
| ASTM D 6896 : 2018 | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature |
| ASTM D 402/D402M : 2014 | Standard Test Method for Distillation of Cutback Asphalt (Withdrawn 2023) |
| ASTM D 2162 : 2017 | Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards |
| ASTM D 61 : 2015 : REDLINE | Standard Test Method for Softening Point of Pitches (Cube-in-Water Method) |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ASME PTC22 : 2014 | GAS TURBINES |
| BS EN ISO 2592:2017 | Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
| API MPM CH7.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATURE DETERMINATION - SECTION 4 - DYNAMIC TEMPERATURE MEASUREMENT |
| ASTM D 3941 : 2015-02 | TEST METHOD FOR FLASH POINT BY THE EQUILIBRIUM METHOD WITH A CLOSED-CUP APPARATUS |
| 17/30366325 DC : 0 | BS EN ISO 3104 - PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY |
| ASTM D 2162 : 2017 : REDLINE | Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards |
| ASTM D 6176M : 1997 | Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric) |
| BS 2000-34(2016) : 2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| ASTM D 1310 : 2014 : REDLINE | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
| I.S. EN ISO 2719:2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| I.S. EN ISO 3679:2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
| ASTM D 4402/D4402M : 2015 : REDLINE | Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
| API MPM CH7.3 : 2011(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| BS 2000-523(2015) : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 15/30301302 DC : 0 | BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| ASTM D 3941 : 2014 | Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus |
| ASTM D 2532 : 2017 | Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants |
| ASTM D 61 : 2015 | Standard Test Method for Softening Point of Pitches (Cube-in-Water Method) |
| ASTM D 2158 : 2016 : REV A : EDT 1 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
| API MPM CH7.3:2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| API 551 : 2016 | PROCESS MEASUREMENT |
| DIN EN ISO 3679:2015-06 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| ASTM D 4402/D4402M : 2015 | Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
| API MPM CH7.3 SPANISH : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| 16/30325304 DC : 0 | BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| 13/30285144 DC : 0 | BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS ISO 6487 : 2015 | ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
| AASHTO T 100 : 2015 | METHOD OF TEST FOR SPECIFIC GRAVITY OF SOILS |
| I.S. EN ISO 2592:2017 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
| BS EN ISO 3679:2015 | Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
| UNE-EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| UNE-EN ISO 2719:2017 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| API MPM CH7.5 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.5: TEMPERATURE DETERMINATION - AUTOMATIC TANK TEMPERATURE MEASUREMENT ONBOARD MARINE VESSELS CARRYING REFRIGERATED HYDROCARBON AND CHEMICAL GAS FLUIDS |
| ASTM E 2623 : 2014 : REDLINE | Standard Practice for Reporting Thermometer Calibrations |
| ASTM D 402/D402M : 2014 : REDLINE | Standard Test Method for Distillation of Cutback Asphalt (Withdrawn 2023) |
| ISO 6487:2015 | Road vehicles — Measurement techniques in impact tests — Instrumentation |
| PIP PCETE001 : 2014 | TEMPERATURE MEASUREMENT GUIDELINES |
| ASTM E 1652 : 2015 : REDLINE | Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Base Metal Thermocouples, Metal-Sheathed Platinum Resistance Thermometers, and Noble Metal Thermocouples |
| ASTM E 644 : 2011 : REDLINE | Standard Test Methods for Testing Industrial Resistance Thermometers |
| ASTM E 344 : 2016-12 | TERMINOLOGY RELATING TO THERMOMETRY AND HYDROMETRY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.