ASTM E 1064 : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
04-08-2023
English
27-07-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 15.05, 2017 Defines the determination of water from 0 to 2.0% mass in most liquid organic chemicals, with Karl Fischer reagent, using an automated coulometric titration procedure.
| Committee |
D 16
|
| DocumentType |
Redline
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method covers the determination of water from 0 to 2.0 % mass in most liquid organic chemicals, with Karl Fischer reagent, using an automated coulometric titration procedure. Use of this test method is not applicable for liquefied gas products such as Liquid Petroleum Gas (LPG), Butane, Propane, Liquid Natural Gas (LNG), etc.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3Review the current Safety Data Sheets (SDS) for detailed information concerning toxicity, first-aid procedures, handling, and safety precautions.
1.4This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.
| MIL I 85470 : A | INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH |
| MIL I 27686 : F | INHIBITOR, ICING, FUEL SYSTEM |
| XP M15 029 : 2006 XP | AUTOMOTIVE FUELS - PETROL-SUPERETHANOL - REQUIREMENTS AND TEST METHODS |
| ASTM D 7124 : 2017 : REDLINE | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
| ASTM D 7875 : 2014 | Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography |
| ASTM D 7185 : 2017 : REDLINE | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
| ASTM E 2470 : 2009 : R2015 : EDT 1 | Standard Specification for Polyester Grade Ethylene Glycol |
| ASTM D 7920 : 2015 | Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography |
| ASTM D 5395 : 2003 | Standard Specification for Reclaimed Methylene Chloride |
| ASTM D 6201 : 2004 | Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D 5396 : 2004 : R2010 | Standard Specification for Reclaimed Perchloroethylene |
| ASTM D 5501 : 2012 : EDT 1 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography |
| MIL-DTL-27686 Revision G:1997 | INHIBITOR, ICING, FUEL SYSTEM |
| SAE J 3042 : 2015 | MEASURING PROPERTIES OF LI-BATTERY ELECTROLYTE |
| ASTM D 7467 : 2017-03 | SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20) |
| ASTM D 5396 : 2004 | Standard Specification for Reclaimed Perchloroethylene |
| ASTM D 7920 : 2015 : EDT 1 | Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography |
| ASTM D 6201 : 2004 : R2014 | Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D 5396 : 2004 : R2015 | Standard Specification for Reclaimed Perchloroethylene |
| ASTM D 5501 : 2012 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography |
| ASTM D 7618 : 2013 : R2017 | Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel |
| ASTM D 5395 : 2003 : R2008 | Standard Specification for Reclaimed Methylene Chloride <a href="#fn00002"></a> |
| ASTM D 6201 : 2004 : R2009 | Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D 7618 : 2013 | Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel |
| ASTM D 5501 : 2012 : R2016 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography |
| ASTM E 2409 : 2013 : REDLINE | Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol<brk/>(Gas Chromatographic Method) |
| ASTM E 1119 : 2009 : R2015 : EDT 1 | Standard Specification for Industrial Grade Ethylene Glycol |
| ASTM E 2470 : 2009 : R2015 | Standard Specification for Polyester Grade Ethylene Glycol |
| ASTM E 202 : 2012-06 | TEST METHODS FOR ANALYSIS OF ETHYLENE GLYCOLS AND PROPYLENE GLYCOLS |
| ASTM E 3050 : 2016 | Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel |
| ASTM E 203 : 2016 : REDLINE | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM E 2470 : 2009 | Standard Specification for Polyester Grade Ethylene Glycol |
| ASTM D 5395 : 2003 : R2013 | Standard Specification for Reclaimed Methylene Chloride |
| ASTM E 1119 : 2009 : R2015 | Standard Specification for Industrial Grade Ethylene Glycol |
| ASTM D 7785 : 2012 | Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration |
| ASTM E 1119 : 2009 | Standard Specification for Industrial Grade Ethylene Glycol |
| ASTM D 6224 : 2016 : REDLINE | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| I.S. CWA 15293:2005 | AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS |
| ASTM D 4672 : 2012-08 | TEST METHODS FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF WATER CONTENT OF POLYOLS |
| ASTM E 180 : 2003 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009) |
| ASTM E 203 : 2016 : REDLINE | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.