ASTM E 10 : 2017-05
Current
Current
The latest, up-to-date edition.
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
Published date
01-05-2017
CONTAINED IN VOL. 03.01, 2017 Defines the determination of the Brinell hardness of metallic materials by the Brinell indentation hardness principle.
| Committee |
E 28
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| SAE AMS5022N | Steel, Bars, Forgings, and Tubing, Free-Cutting 0.14 - 0.20C (SAE 1117) |
| API 6A REDLINE : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| API 16C RUSSIAN : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
| CSA W47.1 : 2009 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| SAE AMS5747D | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable |
| ASTM A 823 : 1999 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| SAE J434_201712 | Automotive Ductile (Nodular) Iron Castings |
| DOD-F-24669-7 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS, CORROSION RESISTING, NAVAL STEAM TURBINE USE (METRIC) |
| API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
| API 5C6 RUSSIAN : 2012 | WELDING CONNECTIONS TO PIPE |
| SAE AMS5441B | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable |
| MIL-P-60596 Revision B:1990 | PROJECTILE, HE, 8 INCH M106 METAL PARTS ASSEMBLY |
| MIL P 64008 : 0 | PROJECTILE, 155MM: XM825 METAL PARTS ASSEMBLY |
| MIL P 60547 : F | PROJECTILE, 105 MM, HE, M1 & M760 METAL PARTS ASSEMBLY |
| MIL-P-50345 Revision F:1994 | PROJECTILES,155MM:M483A1-M718/M741-M692/M731 METAL PARTS ASSEMBLY |
| MIL-DTL-45916 Revision C:2014 | INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| DOD-F-24669-2 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS - CHROMIUM MOLYBDENUM ALLOY (METRIC) |
| FF-B-575 Revision C:1970 | BOLTS, HEXAGON AND SQUARE |
| SAE J1887_201802 | Automotive Compacted Graphite Iron Castings |
| MIL-H-6875 Revision H:1989 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| MIL-S-23284 Revision A:1990 | STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, COUPLINGS AND STOCKS (RUDDERS AND DIVING PLANES) |
| SAE AMS4222H | Aluminum Alloy Castings, Sand, Moderate Heat Resistance 4.0Cu - 2.0Ni - 1.5Mg - 0.12Ti (242.0P) Solution Heat Treated and Stabilized |
| MIL-H-21367 Revision E:1985 | HULL FITTINGS: CONNECTORS, ADAPTER, END SEALS, AND STUFFING TUBES FOR FLEXIBLE, SOLID-DIELECTRIC, RADIO-FREQUENCY CABLES |
| MIL-DTL-60547 Revision G:2008 | PROJECTILE, 105 MM, HE, M1 AND M760 - METAL PARTS ASSEMBLY |
| MIL-PRF-13803 Revision F:1996 | VALVE, GATE - DOUBLE-DISK, CAST-IRON OR STEEL |
| 12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| 13/30261096 DC : 0 | BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| 17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| 06/30125909 DC : DRAFT OCT 2006 | ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
| MIL A 46177 : B | ARMOR, STEEL PLATE & SHEET, WROUGHT, HOMOGENEOUS (1/8 TO LESS THAN 1/4 INCH THICK) |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| FF-B-584 Revision F:1989 | BOLTS, FINNED NECK, KEY HEAD, MACHINE, RIBBED NECK, SQUARE NECK, TEE HEAD |
| MIL-DTL-12560 Revision K:2013 | ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING) |
| MIL-S-45933 Base Document:1971 | STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR |
| QQ N 00286 : F | NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| MIL P 60584 : A | PROJECTILE, 155MM, SMOKE, WP, M110 METAL PARTS ASSEMBLY |
| API 6A CHINESE : 2011 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| MIL-Q-45970 Revision A:1975 | QUALITY ASSURANCE FOR WEAPONS AND SUPPORT MATERIAL |
| 03/312144 DC : DRAFT JULY 2003 | ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
| 08/30190263 DC : DRAFT SEP 2008 | BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| MIL-DTL-46193 Revision A:1998 | ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
| MIL-DTL-46100 Revision E:2008 | ARMOR PLATE, STEEL, WROUGHT, HIGH-HARDNESS |
| ASTM A 532/A532M : 2010 | Standard Specification for Abrasion-Resistant Cast Irons |
| SAE AMS5704K | Nickel Alloy, Corrosion and Heat-Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated |
| I.S. EN ISO 17945:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| MIL-S-8844 Revision D:1987 | STEEL BAR, REFORGING STOCK AND MECHANICAL TUBING LOW ALLOY PREMIUM QUALITY |
| MIL I 45932 : 0 | INSERT, SCREW THREAD, THIN WALL, LOCK IN |
| SAE AMS5712K | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution Heat Treated Precipitation Hardenable |
| ASTM A 2 : 2002 : R2008 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| API 11V1 :1995 | SPECIFICATION FOR GAS LIFT EQUIPMENT |
| SAE AMS5010L | Steel Bars Free-Machining Cold Drawn (SAE 1212 or SAE 1215) |
| SAE AMS2303F | Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure |
| SAE AMS5024H | Steel, Bars, Forgings, and Tubing, Free-Cutting 1.5Mn (0.32 - 0.39C) (SAE 1137) |
| SAE AMS5750D | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat Treated |
| SAE AMS5665N | Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 74Ni - 15.5Cr - 8.0Fe |
| AWS B4.0M : 2000 | STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
| AWS B4.0:2016 | STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
| SAE AMS5886C | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 50Ni - 20Cr - 20Co - 5.8Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted 2100 °F (1149 °C) Solution Heat Treated |
| SAE AMS5771F | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 74Ni - 7.0Cr - 16.5 Mo Solution Heat Treated |
| ASTM B 752 : 2006 : R2011 : EDT 1 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
| API 2W : 2006 : R2012 | SPECIFICATION FOR STEEL PLATES FOR OFFSHORE STRUCTURES, PRODUCED BY THERMO-MECHANICAL CONTROL PROCESSING (TMCP) |
| API 5C6 : 2006 : R2012 | PIPE WITH WELDED CONNECTORS |
| SAE AMS4223E | Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged |
| ASTM B 599 : 1992 : R2009 : EDT 1 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| SAE AMS2355M | Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloy Wrought Products (Except Forging Stock), and Rolled, Forged, or Flash Welded Rings |
| SAE AMS4434N | Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated |
| ASTM A 602 : 1994 : R2014 | Standard Specification for Automotive Malleable Iron Castings |
| ASTM A 125 : 1996 : R2001 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM B 427 : 2009 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM F 541 : 2012 : REDLINE | Standard Specification for Alloy Steel Eyebolts |
| ASTM B 427 : 2009 : R2015 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM A 47/A47M : 1999 : R2004 | Standard Specification for Ferritic Malleable Iron Castings |
| SAE AMS4862F | Manganese Bronze, Sand and Centrifugal Castings 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe High Strength, As Cast |
| ASTM A 47M : 1990 | Standard Specification for Ferritic Malleable Iron Castings [Metric] |
| ASTM B 599 : 1992 : R2014 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM B 945 :2006 | Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers |
| ASTM A 159 : 1983 : R2011 | Standard Specification for Automotive Gray Iron Castings |
| ASTM F 1314 : 2018 : REDLINE | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| ASTM B 945 : 2006 : R2014 | Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers |
| ASTM A 47/A47M : 1999 : R2009 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM B 599 : 1992 : R2003 : EDT 1 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM A 476/A476M : 2000 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| ASTM A 1 : 2000 : R2010 | Standard Specification for Carbon Steel Tee Rails |
| ASTM B 688 : 1996 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| ASTM B 807/B807M : 2013 : REDLINE | Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys |
| ASTM A 834 : 1995 : R2001 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM F 1684 : 2006 : R2011 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM F 620 : 2011 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| ASTM A 395/A395M : 1999 : R2014 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM B 546 : 2004 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM A 834 : 1995 : R2015 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| DIN EN ISO 15156-2:2015-12 | Petroleum and natural gas industries - Materials for use in HS-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons (ISO 15156-2:2015) |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
| MIL-DTL-63245 Revision C:2008 | Projectile 155 Millimeter: HE, Metal Parts Assembly, M795 |
| MIL A 12560 : H | ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING) |
| NBR 16080 : 2013 | INTERNAL COMBUSTION ENGINES - CYLINDER LINERS ASSEMBLED IN THE BLOCK WITH OR WITHOUT CONTACT WITH THE COOLANT (WET AND DRY TYPE RESPECTIVELY) |
| MIL-S-63540 Revision C:1995 | STUD, SELF-CLINCHING GENERAL SPECIFICATION FOR |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
| MIL-DTL-18295 Revision F:1998 | CHAINS AND FITTINGS FOR FLEET MOORING |
| SAE AMS5667N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable |
| MIL-P-13326 Revision D:1987 | PLATE, METAL, STEEL ALLOY; HEAT TREATED, HIGH STRENGTH; FOR WELDED STRUCTURES |
| MIL-W-63150 Base Document:1977 | WEAPONS AND SUPPORT MATERIAL STANDARD QUALITY ASSURANCE PROVISIONS FOR |
| CSA W47.1 : 2009 : R2014 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| ASTM A 1095 : 2015 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
| MIL-P-63208 Revision B:1985 | PROJECTILE, 105 MM, HEAT T, M622 METAL PARTS |
| CSA W47.1 : 2009 : INC : UPD 3 : 2011 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| API 6ACRA : 2015 : ERR 1 : 2015 | AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| SAE AMS5713K | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution and Precipitation Heat Treated |
| SAE AMS4249A | Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing) |
| SAE AMS5663N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated |
| MIL-DTL-32332 Base Document:2009 | Armor Plate, Steel, Wrought, Ultra-High-Hardness |
| API 6A718 REDLINE : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| NFPA 1914 : 2002 | TESTING FIRE DEPARTMENT AERIAL DEVICES |
| ASTM B 719 : 2000 : R2009 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| DOD-STD-35-19 Revision A:1984 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM TERMINALS AND TERMINAL STRIPS |
| DOD-C-70514 Base Document:1985 | Cartridge, 120MM, Super Slug, Load, Assemble, and Pack |
| ASTM B 647 : 2010 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| API BULL 2S : 1995 | DESIGN OF WINDLASS WILDCATS FOR FLOATING OFFSHORE STRUCTURES |
| ASTM B 247M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
| MIL C 18295 : E | CHAIN AND FITTINGS FOR FLEET MOORINGS |
| MIL P 14852 : B | PROJECTILE, 105 MM ILLUMINATING, M314A3, METAL PARTS ASSEMBLY |
| ASTM A 942 : 1995 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells |
| SAE AMS5442B | Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated |
| ASTM B 277 : 1995 | Standard Test Method for Hardness of Electrical Contact Materials |
| SAE AMS4335A | Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness |
| MIL-P-70524 Base Document:1990 | PROJECTILE, 105 MM, HE, RA, XM913/XM927 WARHEAD INSULATION ASSEMBLY FOR |
| MIL-A-12545 Revision D:1989 | ALUMINUM ALLOY IMPACTS |
| MIL-S-12515 Revision C:1983 | SURFACE HARDENING, FLAME AND INDUCTION (FOR FERROUS ALLOYS) |
| ASTM F 765 : 1993 : R2017 | Standard Specification for Wildcats, Ship Anchor Chain |
| API 20C : 2015 | CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| MIL-A-46173 Base Document:1976 | ARMOR, STEEL, PLATE, WROUGHT, (ESR) (3/16 THROUGH 3 LINES, INCLUSIVE) |
| DOD-STD-35-36 Revision B:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
| MIL-DTL-24231 Revision E:2013 | Connectors, Plugs, Receptacles, Adapters, Hull Inserts, and Hull Insert Plugs, Pressure-Proof, General Specification for |
| ASTM B 894 : 2017 : REDLINE | Standard Specification for ACuZinc5 |
| QQ-C-390 Revision B:1983 | COPPER ALLOY CASTINGS (INCLUDING CAST BAR) |
| ASTM A 833 : 2017 : REDLINE | Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ASTM G 81 : 1997 : REV A : R2013 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| API SPEC 19TT : 2016 | SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT |
| MIL-P-60620 Revision D:1985 | PROJECTILE ASSEMBLY FOR CARTRIDGE, SMOKE, WP, 81MM, M375A1 |
| DOD-F-24669-3 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS FOR NITRIDING (METRIC) |
| SAE AMSS11310B | Steel Bars, Carbon, Hot Rolled, for Cold Shaping, Including Cold Extrusion |
| SAE AS7101C | National Aerospace and Defense Contractors Accreditation Program (NADCAP) General Requirements for Materials Test Laboratory Accreditation Program |
| SAE AMS4873F | Aluminum Bronze Alloy, Sand Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered |
| SAE AMS4634C | Aluminum Bronze Bars, Rods, and Forgings 90.5Cu - 7.5Al - 1.9Si Stress Relieved |
| ASTM A 159 : 1983 : R2006 | Standard Specification for Automotive Gray Iron Castings |
| SAE AMS 4892 : 2017 | ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, AS CAST |
| SAE AMS4617A | Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510) Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged |
| SAE AMS5884D | Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb(Nb) - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion |
| SAE AMS4406A | Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated |
| ISO 10433:1994 | Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service |
| SAE J417_201801 | Hardness Tests and Hardness Number Conversions |
| SAE AMS4635G | Aluminum Bronze Bars, Rods, and Forgings 87Cu – 9Al - 3Fe Stress Relieved |
| SAE AMS 4632 : 2001 | ALUMINUM BRONZE BARS AND RODS 90CU - 8.5A1, HARD |
| SAE AMS4420P | Magnesium Alloy Castings, Sand 6Al - 3Zn (AZ63A-F) As Cast |
| SAE AMS7490Q | Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt Alloys, or Precipitation-Hardenable Alloys |
| SAE AMS4616F | Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved |
| SAE AMS4111E | Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated |
| MSS SP 118 : 2007 | COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE) |
| ASTM B 648 : 2010 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM B 162 : 1999 : R2009 | Standard Specification for Nickel Plate, Sheet, and Strip |
| SAE AMS5701E | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated |
| SAE AMS 4614 : 2012 | BRASS FORGINGS, FREE CUTTING 60CU - 2.0PB - 37.5ZN AS FORGED (M10) (COMPOSITION SIMILAR TO UNS C37700) |
| API SPEC 2W:2006 | SPECIFICATION FOR STEEL PLATES FOR OFFSHORE STRUCTURES, PRODUCED BY THERMO-MECHANICAL CONTROL PROCESSING (TMCP) |
| SAE AMSS6758B | Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality) |
| ASTM F 2581 : 2012 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| SAE AMS5706M | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F Solution Heat Treated |
| SAE AMS 5638 : 2015 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED |
| ASTM B 599 : 1992 : R1997 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM A 834 : 1995 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| SAE AMS5754M | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated |
| SAE AMS 5755 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 64NI - 5.0CR - 24.5MO - 5.5FE, SOLUTION HEAT TREATED |
| API 6AR : 1994 | RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM A 1038 : 2017 : REDLINE | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
| SAE AMS 7496 : 2012 | RINGS, FLASH WELDED CARBON AND LOW-ALLOY STEELS |
| ASTM A 476/A476M : 2000 : R2005 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| SAE AMS2759E | Heat Treatment of Steel Parts General Requirements |
| ASTM F 1586 : 2013 : EDT 1 | Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) |
| ASTM B 688 : 1996 : R2004 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| ASTM F 620 : 2011 : R2015 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| SAE AMS5700G | Steel, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed |
| ASTM B 168 : 2011(R2016) | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip |
| ASTM B 718 : 2000 : R2006 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM B 718 : 2000 : R2011 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM A 220/A220M : 1999 | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 476/A476M : 2000 : R2014 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM B 749 : 2014 : REDLINE | Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products |
| ASTM F 1106 : 1987 : R2012 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM B 929 : 2017 : REDLINE | Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar |
| ASTM A 125 : 1996 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM A 602 : 1994 : R2009 | Standard Specification for Automotive Malleable Iron Castings |
| ASTM G 81 : 1997 : REV A : R2002 : EDT 1 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM F 2229 : 2012 : REDLINE | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| ASTM B 763/B763M : 2015 : REDLINE | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| ASTM F 561 : 2013 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| I.S. EN ISO 15156-2:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| I.S. EN ISO 10423:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| EN ISO 15156-2:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
| I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| NF EN ISO 10423 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| API 7NRV : 2006 : R2012 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| ASTM B 277 : 1995 : R2006 | Standard Test Method for Hardness of Electrical Contact Materials |
| CSA W47.1 : 2009 : INC : UPD 7 : 2014 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| API TR 938-B : 2008 | USE OF 9CR-1MO-V (GRADE 91) STEEL IN THE OIL REFINING INDUSTRY |
| SAE AMS4417C | Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A - T6) Solution and Precipitation Heat Treated |
| ASTM B 824 : 2017 : REDLINE | Standard Specification for General Requirements for Copper Alloy Castings |
| MIL-DTL-60584 Revision B:2006 | Projectile,155 Millimeter - Smoke, WP, Metal Parts Assembly, M110A2 |
| MIL-DTL-3241 Revision F:2010 | REELS, CABLE (REELS DR-5(), DR-7(), DR-B(), RC-453()/G, RL-159()/U) |
| MIL V 13803 : E | VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
| SAE AMS4314D | Aluminum Alloy Rings, Rolled or Forged 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated |
| MIL-P-63293 Revision B:1983 | PROJECTILE, 105 MM, HEAT T MP, M456A2 METAL PARTS ASSEMBLY |
| MIL-P-60646 Revision B:1984 | PROJECTILE, 105 MM, HEAT-T, M456A1 METAL PARTS |
| ASTM A 125 : 1996 : R2013 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| MIL-P-50585 Base Document:1970 | PROJECTILE 8 INCH, HE, M404 HARDWARE FOR |
| SAE MAM5706C | Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, 995 to 1040°C Solution Heat Treated |
| GGG-P-831 Revision F:1995 | PUNCHES; CENTER, DRIVE PIN, ALIGNING, AND PRICK |
| API 945:2003 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
| ASTM F 765 : 1993 : R1998 | Standard Specification for Wildcats, Ship Anchor Chain |
| A-A-52114 Revision A:1993 | MATTAX, WITH CARRIER |
| MIL-S-11310 Revision E:1976 | Steel Bars, Carbon, Hot Rolled, For Cold Shaping Including Cold Extrusion |
| API SPEC 20E : 2017 | ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| SAE AMS2304B | Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure |
| API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| ASTM A 159 : 1983 : R2001 | Standard Specification for Automotive Gray Iron Castings |
| AGMA 2004 : C | GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL |
| ASTM A 47/A47M : 1999 : R2014 | Standard Specification for Ferritic Malleable Iron Castings |
| API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
| SAE AMS4285F | Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated |
| 04/301931 DC : DRAFT JAN 2004 | ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| AWWA C507 : 2015 | BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM) |
| ASTM B 505/B505M : 2018 : REDLINE | Standard Specification for Copper Alloy Continuous Castings |
| API 6ACRA : 2015 : INC : ADD 1 : 2017 | AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| ASTM G 81 : 1997 : REV A : R2007 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| MIL-P-45971 Base Document:1975 | PRODUCT ENGINEERING QUALITY ENGINEERING SYSTEM (PEQES) FOR WEAPONS AND SUPPORT MATERIAL |
| MIL-STD-1252 Base Document:1975 | INERTIA FRICTION WELDING PROCESS, PROCEDURE AND PERFORMANCE QUALIFICATION |
| ASTM A 1099/A1099M : 2017 | Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels |
| SAE AMS 7482 : 1995 | STUDS - STEEL, CORROSION AND HEAT RESISTANT,ROLL THREADED AFTER HEAT TREATMENT, 1800F (980 C) SOL HEAT TREATED |
| MIL-C-19310 Revision A:1972 | COPPER-CHROMIUM-ALLOY CASTINGS |
| MIL P 70679 : 0 | PROJECTILE, 60MM, WP, XM722 BODY ASSEMBLY |
| MIL STD 1693 : A NOTICE 2 | FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES |
| SAE AMS 4440 : 1999 | MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| SAE AMS5660L | Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated |
| SAE AMS5891B | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La Annealed |
| SAE AMS 4676 : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
| DOD-S-63543 Base Document:1982 | STUD & ROD, THREADED, METRIC, GENERAL SPECIFICATION FOR |
| SAE AMS4871H | Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered |
| ASTM F 765 : 1993 : R2006 | Standard Specification for Wildcats, Ship Anchor Chain |
| ASTM A 395/A395M : 1999 : EDT 1 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| SAE J2582_201801 | Automotive Ductile Iron Castings for High Temperature Applications |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| API 2SF : 2013 | MANUFACTURE OF STRUCTURAL STEEL FORGINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| SAE AMS 5877 : 2012 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
| SAE J431_201801 | Automotive Gray Iron Castings |
| ASTM A 602 : 1994 : R2004 | Standard Specification for Automotive Malleable Iron Castings |
| SAE AMS 5854 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED |
| SAE AMS5069G | Steel Bars, Forgings, and Tubing 0.15 - 0.20C (SAE 1018) |
| SAE AMS5772E | Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated |
| SAE AMS4212L | Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated |
| SAE AMS5751F | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
| ASTM F 2581 : 2012 : R2017 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| SAE AMS5624F | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished |
| SAE AMS4225E | Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated |
| SAE AMS 5962 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS AND WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION TREATED AND WORK STRENGTHENED, PRECIPITATION HARDENABLE |
| SAE AMS4107G | Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged |
| SAE AMS4120S | Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351) |
| API 7 : 2001 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
| ASTM B 162 : 1999 : R2005 | Standard Specification for Nickel Plate, Sheet, and Strip |
| API 20B : 2013 | OPEN DIE SHAPED FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| API 5C6 : 2006 | PIPE WITH WELDED CONNECTORS |
| SAE AMS2300L | Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure |
| API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
| SAE AMS4231G | Castings, Sand, 4.5Cu - 1.1Si, Solution and Precipitation Heat Treated |
| ASTM B 718 : 2000 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM F 1684 : 2006 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM A 1 : 2000 | Standard Specification for Carbon Steel Tee Rails |
| ASTM A 823 : 1999 : R2008 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM A 880 : 1995 | Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004) |
| ASTM B 719 : 2000 : R2014 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-<brk/>Iron-Silicon Alloy (UNS N06333) Bar |
| SAE AMS4284K | Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated |
| ASTM B 906 : 2002 : R2017 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM B 277 : 1995 : R2001 | Standard Test Method for Hardness of Electrical Contact Materials |
| SAE AMS2658D | Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts |
| ASTM F 1106 : 1987 : R1998 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
| ASTM B 906 :2002 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM B 906 : 2002 : R2006 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM F 961 : 2014 : REDLINE | Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| ASTM F 1684 : 2006 : R2016 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM B 100 : 2013 : REDLINE | Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use |
| ASTM B 168 : 2011 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, |
| ASTM A 2 : 2002 : R2014 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM B 719 : 2000 : R2005 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ASTM G 81 : 1997 : REV A | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM E 110 : 2014 : REDLINE | Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
| ASTM A 909/A909M : 2006 : R2011 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| UNI EN ISO 11961 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| NACE SP 04 72 : 2015 | METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| API 6RS : 1ED 90 SUPP 1 | BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT |
| UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| MIL-STD-3049 Base Document:2013 | MATERIALS DEPOSITION, DDM: DIRECT DEPOSITION OF METAL FOR REMANUFACTURE, RESTORATION AND RECOATING |
| API 2SC : 2010 | MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| 03/305165 DC : DRAFT MAR 2003 | ISO 17078-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| ASTM A 125 : 1996 : R2007 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| CSA W47.1 : 2009 : INC : UPD 6 : 2013 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| SAE AMS4163F | Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened |
| SAE AMS5389D | Alloy Castings, Sand, Corrosion and Heat Resistant 55Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V Solution Heat Treated |
| ASTM F 765 : 1993 : R2012 : EDT 1 | Standard Specification for Wildcats, Ship Anchor Chain |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| SAE AMS2774E | Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts |
| API 16RCD RUSSIAN : 2005 | SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES |
| AGMA 923 : B | METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
| MIL-STD-1537 Revision C:2002 | Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method |
| SAE AMS5702E | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated |
| ASTM B 22/B22M : 2017 : REDLINE | Standard Specification for Bronze Castings for Bridges and Turntables |
| GG-C-1969 Revision A:1976 | CURETTE, MASTOID, SPRATT |
| MIL-A-11356 Revision F:1987 | ARMOR, STEEL, CAST, HOMOGENEOUS, COMBAT-VEHICLE TYPE (1/4 TO 8 INCHES, INCLUSIVE) |
| MIL H 24653 : 0 | HASP, HIGH SECURITY, SHROUDED FOR SHIPBOARD DOORS AND HATCHES USING HIGH AND MEDIUM SECURITY PADLOCK |
| A-A-51141 Revision A:1990 | PLATE, LAPPING |
| MIL-S-5000 Revision E:1982 | STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS AND REFORGING STOCK |
| ASTM A 395/A395M : 1999 : R2009 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 942 : 1995 : R2001 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells |
| ASTM B 648 : 2010 : R2015 : EDT 1 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM B 162 : 1999 | Standard Specification for Nickel Plate, Sheet, and Strip |
| SAE MAM4427A | Magnesium Alloy Sand Castings 4.0y 2.3nd 0.7zr Solution and Precipitation Heat Treated |
| SAE AMS5671G | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5711E | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Solution Heat Treated |
| SAE AMS2773E | Heat Treatment Cast Nickel Alloy and Cobalt Alloy Parts |
| MIL-P-50535 Base Document:1970 | PROJECTILE, 155MM, HE, M449A1, BODY ASSEMBLY FOR |
| IFI 140 : 2000 | CARBON AND ALLOY STEEL WIRE, RODS AND BARS FOR MECHANICAL FASTENERS |
| API 6A718 : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| ASTM F 606/F606M : 2016 : REDLINE | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| API 5C6 CHINESE : 2006 | WELDING CONNECTIONS TO PIPE |
| MIL-I-46175 Revision A:1983 | |
| API 16R RUSSIAN : 2010 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| ASTM A 159 : 1983 : R2015 | Standard Specification for Automotive Gray Iron Castings |
| ASTM A 823 : 1999 : R2003 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| CSA W47.1 : 2009 : INC : UPD 4 : 2011 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| SAE AMS5664F | Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated, Precipitation Hardenable |
| SAE AMS4631F | Aluminum Bronze Rods, Bars, and Forgings 90.5Cu - 7.5Al - 1.95: Stress Relieved |
| 09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
| SAE AIR4777B | Nondestructive Inspection (NDI) Methods Used During Production and Operation of Aircraft Wheels and Brakes |
| MIL-B-46066 Revision B:1983 | BANDS, ROTATING, COPPER ALLOY, CENTRIFUGAL CAST (FOR CRITICAL APPLICATIONS) |
| MIL A 46193 : 0 | ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
| SAE AMS5668J | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 7.0Fe - 2.5Ti - 1.0Cb (Nb) - 0.70Al 2100 °F (1149 °C) Solution and Precipitation Heat Treated |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| MIL-A-63547 Base Document:1982 | ALUMINUM ALLOY 7475, ROD |
| MIL-H-6088 Revision G:1991 | HEAT TREATMENT OF ALUMINIUM ALLOYS |
| DOD-F-24669-5 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS, BILLET AND WIRE (CHROMIUM NICKEL PHOSPHOROUS AND CHROMIUM NICKEL MANGANESE PHOSPHOROUS) LOW MAGNETIC PERMEABILITY |
| SAE AMS5351G | Steel Castings, Sand, Corrosion and Moderate Heat Resistant 13Cr Normalized and Tempered |
| MIL-R-10185 Revision E:1992 | RING, BREECH, STEEL FORGINGS FOR |
| AASHTO T 244 : 2014 | METHOD OF TEST FOR MECHANICAL TESTING OF STEEL PRODUCTS |
| API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ASTM A 220/A220M : 1999 : R2004 | Standard Specification for Pearlitic Malleable Iron |
| MIL P 14824 : B | PROJECTILE, H.E., 155MM, M107 METAL PARTS ASSEMBLY |
| API 2Y : 2006 : R2012 | SPECIFICATION FOR STEEL PLATES, QUENCHED-AND-TEMPERED, FOR OFFSHORE STRUCTURES |
| 08/30141132 DC : DRAFT APR 2008 | BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| SAE AMS 5746 : 2012 | ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| API 5LC : 2015 | CRA LINE PIPE |
| SAE AMS5708L | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated |
| ASTM B 688 : 1996 : R2014 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| MIL-P-48323 Revision C:1984 | PROJECTILE, 8 INCH, HE, RA, M650 ROCKET MOTOR BODY ASSEMBLY |
| MIL S 13823 : C | STEEL, SHAPES, ROLLED OR FORGED, BARS, FLATS AND SPECIAL SECTIONS (FOR ARMOR) |
| NF EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| SAE AMS4870F | Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe As Cast |
| API SPEC 16RCD : 2015 | SPECIFICATION FOR ROTATING CONTROL DEVICES |
| SAE AMS7721D | Lead Alloy Sheet and Extrusions 93Pb - 6.5Sb - 0.50Sn As Fabricated |
| SAE AMS 4893 : 2017 | ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, SOLUTION TREATED |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| API STD 6ACRA:2015 | AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| API 2S : 1995 : R2001 | DESIGN OF WINDLASS WILDCATS FOR FLOATING OFFSHORE STRUCTURES |
| ASTM A 909/A909M : 2006 : R2016 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| SAE AMS4149E | Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated |
| SAE AMS5662N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable |
| API 11V1 : 1995 : R2008 | SPECIFICATION FOR GAS LIFT EQUIPMENT |
| SAE AMS5661F | Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated |
| SAE AMS4236D | Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged |
| SAE AMS 5714 : 2018 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE |
| SAE AMS4313E | Aluminum Alloy, Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved |
| API 5CT METRIC : 1995 | SPECIFICATION FOR CASING AND TUBING (METRIC UNITS) |
| API 20C CHINESE : 2009 | CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| SAE AMS5769F | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta) - 0.15N - 32Fe Solution Heat Treated |
| SAE AMS5707N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated |
| API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| SAE AMS2301K | Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure |
| SAE AMS5768L | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and Precipitation Heat Treated |
| NFPA 1904 : 1991 | AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS |
| API 942 : 2ED 82 | CONTROLLING WELD HARDNESS OF CARBON STEEL REFINERY EQUIPMENT TO PREVENT ENVIRONMENTAL CRACKING |
| SAE AMS5670F | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation-Hardenable |
| ASTM B 846 : 2011-07 | TERMINOLOGY FOR COPPER AND COPPER ALLOYS |
| ASTM A 602 : 1994 : R2018 | Standard Specification for Automotive Malleable Iron Castings |
| ASTM F 1106 : 1987 : R2006 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
| ASTM F 139 : 2012 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| ASTM A 395/A395M : 1999 : R2018 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 1100 : 2016 | Standard Guide for Qualification and Control of Induction Heat Treating |
| ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| ASTM B 546 : 2004 : R2014 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM A 1 : 2000 : R2005 | Standard Specification for Carbon Steel Tee Rails |
| ASTM A 1058 : 2014 : REDLINE | Standard Test Methods for Mechanical Testing of Steel Products—Metric |
| ASTM A 823 : 1999 : R2012 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM A 1 : 2000 : R2018 | Standard Specification for Carbon Steel Tee Rails |
| ASTM B 752 : 2006 : R2011 : EDT 2 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
| ASTM A 47/A47M : 1999 : R2018 : EDT 1 | Standard Specification for Ferritic Malleable Iron Castings |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| BS EN ISO 10423:2009 | Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| FF-S-1362 Revision A:2014 | Stud, Plain, General Purpose |
| ISO 17945:2015 | Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
| ASTM A 532/A532M : 2010 : R2014 | Standard Specification for Abrasion-Resistant Cast Irons |
| ASTM A 159 : 1983 : R1993 | Standard Specification for Automotive Gray Iron Castings |
| 03/301625 DC : DRAFT JAN 2003 | BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT |
| CSA W47.1 : 2009 : INC : UPD 2 : 2011 : FR | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
| ASTM A 602 : 1994 : R1998 | Standard Specification for Automotive Malleable Iron Castings |
| NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
| SAE AMS5080K | Steel, Bars, Forgings, and Tubing 0.31 - 0.38C (SAE 1035) |
| API 945 : 2003 : R2008 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
| API 16C CHINESE : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
| SAE J2477_201801 | Automotive Austempered Ductile (Nodular) Iron Castings (ADI) |
| API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| CSA W47.1 : 2009 : INC : UPD 5 : 2012 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| MIL-P-50537 Base Document:1970 | PROJECTILE 155mm, HE M449A1 HARDWARE FOR |
| BS EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| MIL-DTL-46177 Revision C:1998 | Armor, Steel Plate and Sheet, Wrought, Homogeneous (1/8 to Less Than 1/4 Inch Thick) |
| DOD-STD-35-121 Base Document:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, EYELETS, FERRULES, AND GROMMETS |
| QQ-N-286 Revision G:2000 | NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
| DIN EN ISO 17945:2015-08 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| API 16R : 1997 : R2010 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| MIL I 45916 : B | INSERT,SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| MIL-S-46172 Revision A:1984 | STEEL FORGINGS |
| API 6A718 RUSSIAN : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| MIL-T-13915 Revision E:1987 | TUBE, STEEL , SEAMLESS, FOR CANNONS AND RECOILLESS RIFLES |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| MIL-DTL-14824 Revision C:2007 | PROJECTILE 155 MM, HE, METAL PARTS ASSEMBLY, M107 |
| MIL-DTL-13823 Revision D:1998 | STEEL; SHAPES, ROLLED OR FORGED; BARS, FLATS AND SPECIAL SECTIONS (FOR ARMOR) |
| SAE AMS5666H | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65Cb (Nb) Annealed |
| ASTM B 647 : 2010 : R2016 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| MIL-DTL-22606 Revision D:2011 | FLASK AND END PLUGS, COMPRESSED GAS - AIR, OXYGEN, AND NITROGEN |
| MIL-B-16166 Revision B:1972 | BRONZE, ALUMINUM, FORGINGS, HEAT TREATED |
| MIL STD 1867 : A | |
| N287.2-17 | Material requirements for concrete containment structures for nuclear power plants |
| SAE AMS 5758 : 2014 | ALLOY, CORROSION-RESISTANT, BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
| MIL-P-70612 Revision A:1993 | PROJECTILE, 155MM, XM864 BASE ASSEMBLY FOR |
| 03/313799 DC : DRAFT AUG 2003 | ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| API 7NRV CHINESE : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| MIL-PRF-32269 Base Document:2007 | Perforated Homogeneous Steel Armor |
| ASTM A 220/A220M : 1999 : R2009 | Standard Specification for Pearlitic Malleable Iron |
| MIL-E-19141 Revision D:1984 | ELECTRODE, WELDING, SURFACING, IRON BASE ALLOY |
| MIL-STD-40002 Base Document:1991 | HEAT TREATMENT CODING SYSTEM, GENERAL |
| ASTM A 159 : 1983 | SPECIFICATION FOR AUTOMOTIVE GRAY IRON CASTINGS |
| MIL-Z-50976 Base Document:1971 | ZIRCONIUM SPONGE |
| MIL-DTL-14852 Revision D:2009 | PROJECTILE, 105 MM, ILLUMINATING, M314A3 AND PROJECTILE, 105 MM, INFRARED ILLUMINATING, M1064 METAL PARTS ASSEMBLY |
| SAE AMS4444E | Magnesium Alloy Castings, Sand 6.0Zn - 0.80Zr (ZK61A-T5) Precipitation Heat Treated |
| IFI 153 : 2003 | STAINLESS STEEL WIRE AND RODS FOR MECHANICAL FASTENERS |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| SAE AMS4275E | Castings, Permanent Mold 6.2Sn - 1Cu - 1Ni Stress Relieved |
| SAE AMS 4677 : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
| SAE AMS4633B | Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50) |
| SAE AMSH6088C | Heat Treatment of Aluminum Alloys |
| SAE J158_198606 | AUTOMOTIVE MALLEABLE IRON CASTINGS |
| API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
| SAE AMS2368D | Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock |
| SAE AMS5703E | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated |
| API 7NRV : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| SAE AMS5759M | Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forging Stock, Forgings, and Rings 52Co – 20Cr – 10Ni – 15W |
| API 16R:1997 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| SAE AMS4227E | Aluminum Alloy, Castings, Sand, 8.0cu 6.0mg 0.50mn 0.50ni, as Cast |
| API 2Y : 2006 | SPECIFICATION FOR STEEL PLATES, QUENCHED-AND-TEMPERED, FOR OFFSHORE STRUCTURES |
| SAE AMS4123H | Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated |
| SAE AMS5852D | Nickel Alloy, Corrosion and Heat Resistant, Billets and Preforms 55ni 15cr 17co 5.0mo 3.5ti 4.0al 0.025b, Powder Metallurgy Product, Hot Isostatically Pressed |
| API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| ASTM B 719 : 2000 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| SAE AMS4443H | Magnesium Alloy, Sand Castings 4.5Zn - 0.75Zr (ZK51A-T5) Precipitation Heat Treated |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ASTM A 834 : 1995 : R2006 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM B 162 : 1999 : R2014 | Standard Specification for Nickel Plate, Sheet, and Strip |
| ASTM B 752 : 2006 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
| ASTM A 2 : 2002 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM B 367:2013 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM B 906 : 2002 : R2012 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM E 1187 : 1997 | Standard Terminology Relating to Conformity Assessment (Withdrawn 2006) |
| ASTM A 220/A220M : 1999 : R2014 | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 897/A897M : 2016 : REDLINE | Standard Specification for Austempered Ductile Iron Castings |
| ASTM B 277 : 1995 : R2012 | Standard Test Method for Hardness of Electrical Contact Materials |
| ASTM B 718 : 2000 : R2016 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM A 909 : 2003 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| ASTM A 395/A395M : 1999 : R2004 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 125 : 1996 : R2013 : EDT 1 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM B 367 : 2013 : R2017 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ASTM A 834 : 1995 : R2011 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM F 621 : 2012 : R2017 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| ASTM B 546 : 2004 : R2009 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM A 942 : 1995 : R2012 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
| ASTM A 476/A476M : 2000 : R2018 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM A 476/A476M : 2000 : R2009 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM B 688 : 1996 : R2009 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| ASTM A 942 : 1995 : R2007 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
| ASTM E 103 : 2017 : REDLINE | Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials |
| ASTM F 621 : 2012 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ASTM A 909/A909M : 2006 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| ASTM A 942/A942M : 1995 : R2012 : EDT 1 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
| BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
| ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
| BS EN ISO 15156-2:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
| I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| ASME B107.9M : 1994 | WRENCHES, BOX, ANGLED, OPEN END, COMBINATION, FLARE NUT, AND TAPPET (METRIC SERIES) |
| ASME A112.3.1 : 2007 : R2012 | STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
| ASME A112.3.1 : 2007 | STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
| ASME A112.3.1 : 2007 : R2017 | STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ISO/IEC 17011:2004 | Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.