ASTM D 979/D979M : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Sampling Bituminous Paving Mixtures
Hardcopy , PDF
12-04-2024
English
06-08-2015
1.1 This practice covers sampling of bituminous paving mixtures at points of manufacture, storage, delivery, or in place.
Committee |
D 04
|
DocumentType |
Standard Practice
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers sampling of bituminous paving mixtures at points of manufacture, storage, delivery, or in place.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 4125/D4125M : 2021 | Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method |
ASTM D 7196 : 2018 | Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples |
ASTM D 3625/D3625M : 2020 | Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water |
ASTM D 7870/D7870M : 2020 | Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure |
ASTM D 8079 : 2016 | Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor |
ASTM D 8237 : 2021 | Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device |
ASTM D 1188/D1188M : 2022 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples |
ASTM D 2041/D2041M : 2019 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures |
ASTM D 2172/D2172M : 2017 : EDT 1 | Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures |
ASTM D 4215 : 2021 | Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures |
ASTM D 6857/D6857M : 2018 | Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method |
ASTM D 7063/D7063M : 2018 | Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples |
ASTM D 8360 : 2022 | Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test |
ASTM D 8044 : 2016 | Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures |
ASTM D 2726/D2726M : 2021 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures |
ASTM D 6925 : 2008 | Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor |
ASTM D 6307 : 2019 | Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method |
ASTM D 5444 : 2005 | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
ASTM D 2726 : 2005 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 6927 : 2005 | Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures |
ASTM D 5361 : 2005 | Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing |
ASTM D 5361 : 2000 | Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing |
ASTM D 3665 : 2002 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 6307 : 2004 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 5361 : 2006 | Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing |
ASTM D 2726 : 2004 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 6925 : 2007 | Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor |
ASTM D 6926 : 2004 | Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus |
ASTM D 2726 : 2010 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 2041 : 2000 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM D 6307 : 1998 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 3665 : 2012 : R2017 | Standard Practice for Random Sampling of Construction Materials |
ASTM E 122 : 2017 : R2022 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
ASTM E 122 : 2017 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
ASTM D 6927 : 2015 | Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures |
ASTM D 2041 : 2003 : REV A | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM D 5444 : 2008 | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
ASTM E 105 : 2021 | Standard Guide for Probability Sampling of Materials |
ASTM D 3665 : 2007 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 2234/D2234M : 2009 | Standard Practice for Collection of a Gross Sample of Coal |
ASTM D 6927 : 2005 : EDT 1 | Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures |
ASTM D 2726 : 2000 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 2041 : 2003 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM D 6925 : 2015 | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
ASTM D 5444 : 2015 | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
ASTM D 3665 : 2012 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 6925 : 2006 | Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor |
ASTM D 6926 : 2020 | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
ASTM D 2726 : 2008 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 6926 : 2010 | Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus |
ASTM D 6927 : 2006 | Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures |
ASTM D 2726 : 2009 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM E 105 : 2016 | Standard Practice for Probability Sampling of Materials |
ASTM D 5444 : 1998 | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
ASTM D 6925 : 2009 | Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor |
ASTM D 2726 : 2005 : REV A | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
ASTM D 6926 : 2016 | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
ASTM D 6307 : 2010 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 6307 : 2005 : R2010 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 3665 : 2007 : EDT 1 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 3665 : 2006 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 6925 : 2003 | Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor |
ASTM D 6927 : 2004 | Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures |
ASTM D 6307 : 2005 | Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method |
ASTM D 6307 : 2016 | Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method |
ASTM D 3665 : 1999 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 2726 : 2011 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.