ASTM D 891 : 2009-04
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TEST METHODS FOR SPECIFIC GRAVITY, APPARENT, OF LIQUID INDUSTRIAL CHEMICALS
Superseded date
01-01-2018
Published date
01-04-2009
Sorry this product is not available in your region.
CONTAINED IN VOL. 15.05, 2017 Determines the specific gravity, apparent, of liquid industrial chemicals by the use of two test methods as follows: Test Method A - specific gravity, apparent, by means of a hydrometer, Test Method B - specific gravity, apparent, by means of a pycnometer.
| Committee |
D 16
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| ASTM F 66 : 1984 : R1990 | Test Methods for Testing Photoresists Used in Microelectronic Fabrication (Withdrawn 1996) |
| ASTM D 8046 : 2016 | Standard Guide for Pumpability of Heat Transfer Fluids |
| SAE AMS 1435 : 2012 | FLUID, GENERIC, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS |
| SAE AMS 1539:1996(S2018) | CLEANING COMPOUND, TERPENE, CIRCUIT BOARD CLEANER |
| MIL-PRF-32295 Revision B:2017 | CLEANER, NON-AQUEOUS, LOW-VOC, HAP-FREE |
| SAE AMS 1428 : 2017 | FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4 |
| ANSI/AWWA B306 : 2015 | AQUA AMMONIA (LIQUID AMMONIUM HYDROXIDE) |
| MIL-C-51012 Revision B:1982 | 0-CHLOROBENZALDEHYDE, TECHNICAL |
| MIL-D-14130 Revision A:1986 | B,B'-DIHYDROXYDIETHYL SULFIDE (THIODIGLYCOL), TECHNICAL |
| MIL-PRF-32597 Base Document:2018 | CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE |
| MIL-C-81947 Revision A:1975 | COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT |
| A-A-50170 Base Document:1988 | EMBALMING FLUID, CAVITY |
| MIL-P-87938 Base Document:1984 | PEROXIDE METHYL ETHYL KETONE, TECHNICAL |
| MIL-E-50008 Revision B:1982 | 2-ETHYLHEXANOIC ACID, TECHNICAL |
| MIL-A-52685 Base Document:1970 | ADHESIVE: BONDING, CHLOROPRENE AIR FIELD, MEMBRANE SURFACING |
| DOD-I-51064 Revision D:1979 | |
| MIL-E-51454 Revision A:1994 | ETHYL ALCOHOL (ETHANOL) |
| MIL I 85470 : A | INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH |
| MIL-A-81236 Base Document:1965 | ADHESIVE; EPOXY RESIN WITH POLYAMIDE CURING AGENT |
| MIL-P-87931 Base Document:1977 | PROPELLANT, ISOPROPYL ALCOHOL |
| O-A-51 Revision H:1992 | ACETONE, TECHNICAL |
| MIL-DTL-27686 Revision G:1997 | INHIBITOR, ICING, FUEL SYSTEM |
| MIL-D-218 Revision B:1981 | DIBUTYL PHTHALATE, TECHNICAL (METRIC) |
| MIL-D-23296 Revision A:1972 | DIETHYLENE GLYCOL |
| TT-N-97 Revision D:2007 | Naphtha; Aromatic |
| O-E-780 Revision B:1992 | ETHYLENE GLYCOL MONOMETHYL ETHER, TECHNICAL |
| TT-A-511 Revision E:1992 | AMYL ACETATE, TECHNICAL |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| MIL-C-10664 Revision C:1981 | CHLOROPICRIN, TECHNICAL |
| TT-E-781 Revision D:1992 | ETHYLENE GLYCOL MONOETHYL ETHER, TECHNICAL |
| MIL-P-51300 Base Document:1952 | PHOSPHOROUS TRICHLORIDE, ANALYZED REAGENT |
| MIL I 27686 : F | INHIBITOR, ICING, FUEL SYSTEM |
| MIL-C-51130 Revision B:1983 | CHEMICALS, REAGENT GRADE; GENERAL SPECIFICATION FOR (METRIC) |
| MIL-I-51498 Base Document:1984 | ISOPROPYLAMINE, TECHNICAL |
| MIL-P-10398 Revision C:1982 | PHOSPHORUS TRICHLORIDE, TECHNICAL |
| P-W-2891 Revision A:2002 | WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
| MIL-D-50030 Revision H:1986 | DECONTAMINATING AGENT, DS2 |
| O-D-1271 Revision B:1985 | DIETHYLENETRIAMINE, TECHNICAL |
| TT-T-548 Revision F:1991 | TOLUENE, TECHNICAL |
| MIL-C-83873 Revision A:1993 | CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
| MIL P 11751 : D | POTASSIUM HYDROXIDE SOLUTION |
| MIL-A-81253 Base Document:1965 | ADHESIVE, MODIFIED EPOXY RESIN WITH POLYAMINE CURING AGENT |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| MIL-DTL-83800 Revision B:2009 | Propanediol, 1, 2- |
| ASTM E 1145 : 1987 : R1992 : EDT 1 | Specification for Denatured Ethyl Alcohol, Formula 3A (Withdrawn 1993) |
| ASTM D 2378 : 2007 | Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited |
| ASTM F 1862/F1862M : 2017 : REDLINE | Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| ASTM D 4836 : 2009 | Standard Specification for Dipropylene Glycol Monomethyl Ether |
| ASTM D 1569 : 2005 : R2014 | Standard Test Methods for Detergent Alkylate (Withdrawn 2023) |
| AASHTO TP 96 : 2013 | METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM D 5194 : 2018 : REDLINE | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 3734 : 2005 : R2018 | Standard Specification for High-Flash Aromatic Naphthas |
| AASHTO TP 96 : 2013 (R2018) | METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM D 3734 : 2005 : R2010 | Standard Specification for High-Flash Aromatic Naphthas |
| ASTM D 7887 : 2013 | Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests |
| AASHTO M 327:2011 | SPECIFICATION FOR PROCESSING ADDITIONS FOR USE IN THE MANUFACTURE OF HYDRAULIC CEMENTS |
| ASTM E 302 : 1995 | Test Methods for Monobasic Organic Acids (Withdrawn 2001) |
| ASTM D 1569 : 2005 | Standard Test Methods for Detergent Alkylate |
| ASTM E 202 : 2012-06 | TEST METHODS FOR ANALYSIS OF ETHYLENE GLYCOLS AND PROPYLENE GLYCOLS |
| ASTM D 3734 : 2005 | Standard Specification for High-Flash Aromatic Naphthas |
| AASHTO M 327 : 2011 : R2015 | SPECIFICATION FOR PROCESSING ADDITIONS FOR USE IN THE MANUFACTURE OF HYDRAULIC CEMENTS |
| AASHTO PP 73 : 2013 : R2015 | PRACTICE FOR QUALITY ASSURANCE, JOB SITE QUALITY CONTROL, AND REAPPLICATION OF PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM E 1547 : 2009 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM D 4836 : 2009 : R2017 | Standard Specification for Dipropylene Glycol Monomethyl Ether |
| BS M 78:1995 | Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II |
| ASTM E 1547 : 2009 : R2017 | Standard Terminology Relating to Industrial and Specialty Chemicals |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| MIL-DTL-11751 Revision G:2010 | Potassium Hydroxide Solution |
| ASTM D 2378 : 2007 : R2012 | Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited (Withdrawn 2021) |
| ASTM D 3585 : 2008 : R2013 | Standard Specification for ASTM Reference Fluid for Coolant Tests |
| ASTM D 5300 : 1993 | Standard Test Method for Measurement of Resin Content and Other Related Properties of Polymer Matrix Thermoset Prepreg by Combined Mechanical and Ultrasonic Methods (Withdrawn 2000) |
| ASTM D 5177 : 1991 : R1996 | Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005) |
| ASTM D 319 : 2004 | Standard Specification for Amyl Alcohol (Synthetic) (Withdrawn 2010) |
| ASTM D 1992 : 2017 : REDLINE | Standard Guide for Testing Synthetic Plasticizers Used in Rubber |
| ASTM D 3800 : 2016 : REDLINE | Standard Test Method for Density of High-Modulus Fibers |
| ASTM D 1198 : 1993 : R1998 | Standard Test Method for Solvent Tolerance of Amine Resins (Withdrawn 2007) |
| ASTM E 201 : 1996 | Test Method for Calculation of Volume and Weight of Industrial Chemical Liquids (Withdrawn 2001) |
| ASTM D 2886 : 1986 | Method of Test for Knock Characteristics of Motor Fuels by the Distribution Octane Number (DON) Method (Withdrawn 1989) |
| MIL-M-23573 Revision B:1986 | MONOETHANOLAMINE CHELATING AGENT SOLUTION |
| MIL-Y-87125 Revision A:1979 | YARN, GRAPHITE, 1000/3000 FILAMENTS |
| SAE AMS C 19853 : 1998 | CARBON REMOVING COMPOUND (FOR USE IN AGITATED TANK) |
| ASTM D 4659 : 2014 : REDLINE | TEST METHODS FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF SPECIFIC GRAVITY OF ISOCYANATES |
| SAE J 3042 : 2015 | MEASURING PROPERTIES OF LI-BATTERY ELECTROLYTE |
| ASTM D 268 : 2001 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| SAE AMS 3165 : 2016 | SOLVENT, PETROLEUM AROMATIC |
| ASTM C 494/C494M : 2017 : REDLINE | Standard Specification for Chemical Admixtures for Concrete |
| ASTM D 3585 : 2008 | Standard Specification for ASTM Reference Fluid for Coolant Tests |
| SAE AMS 1424 : 2017 | FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1 |
| SAE AMS 3180 : 2015 | TOLUENE, INDUSTRIAL GRADE |
| ASTM D 1492 : 2013 : REDLINE | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
| ASTM D 4615 : 2012 : REDLINE | Standard Specification for n-Butyl Acetate (All Grades) |
| SAE AMS 1450 : 1998 | DISINFECTANT (INSECTICIDE), AIRCRAFT |
| SAE AMS 1426 : 2016 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS GLYCOL BASE |
| ASTM D 268 : 2001 : R2012 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021) |
| ASTM D 268 : 2001 : R2007 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| SAE AMS 1432 : 1995 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS, POTASSIUM ACETATE BASE |
| NASA KSC SPEC P 0025 : 2002 | PROPYLENE GLYCOL MONOMETHYL ETHER (PGME) 1-METHOXY-2-PROPANOL, SPECIFICATION FOR |
| DKD-R 3-5 :2018 | PRACTICE FOR QUALITY ASSURANCE, JOB SITE QUALITY CONTROL, AND REAPPLICATION OF PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM E 302 : 1995 | Test Methods for Monobasic Organic Acids (Withdrawn 2001) |
| ASTM E 100 : 2017 : REDLINE | SPECIFICATION FOR ASTM HYDROMETERS |
| ASTM E 12 : 1970 : R1991 : EDT 1 | Terminology Relating to Density and Specific Gravity of Solids, Liquids, and Gases (Withdrawn 1996) |
| ASTM E 202 : 2012-06 | TEST METHODS FOR ANALYSIS OF ETHYLENE GLYCOLS AND PROPYLENE GLYCOLS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.