ASTM D 808 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
English
17-06-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 05.01, 2016 Specifies the determination of chlorine in lubricating oils and greases, including new and used lubricating oils and greases containing additives, and in additive concentrates.
| Committee |
D 02
|
| DocumentType |
Redline
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This test method covers the determination of chlorine in lubricating oils and greases, including new and used lubricating oils and greases containing additives, and in additive concentrates. Its range of applicability is 0.1 m% to 50 m% chlorine. The procedure assumes that compounds containing halogens other than chlorine will not be present.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.2.1The preferred units are mass percent.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Attention is called to specific warning statements incorporated in the test method.
| ASTM E 1219 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
| ASTM D 5177 : 1991 : R1996 | Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005) |
| MIL-L-46152 Revision E:1990 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ADMINISTRATIVE SERVICE, METRIC |
| P-C-111 Revision D:1977 | CARBON REMOVING COMPOUND |
| MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
| MIL F 24951 : B | FUEL OIL RECLAIMED |
| MIL L 2105 : D | LUBRICATING OIL, GEAR, MULTI PURPOSE |
| MIL-PRF-46167 Revision D:2005 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ARCTIC |
| ASTM D 7578 : 2015-06 | GUIDE FOR CALIBRATION REQUIREMENTS FOR ELEMENTAL ANALYSIS OF PETROLEUM PRODUCTS AND LUBRICANTS |
| I.S. EN 14582:2016 | CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
| ASTM E 1209 : 2010 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
| ASTM E 1208 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
| 02/106396 DC : DRAFT NOV 2002 | BS EN 14582 - CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
| ASTM E 1418 : 2016 : REDLINE | Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
| ASTM E 1210 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
| BS EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography |
| ASTM E 1220 : 2016 : REDLINE | Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
| MIL-PRF-21260 Revision E:1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN |
| MIL-PRF-24951 Revision B:1995 | FUEL OIL RECLAIMED |
| FM 6930 : 2009 | FLAMMABILITY CLASSIFICATION OF INDUSTRIAL FLUIDS |
| SAE J 2361 : 1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATION BREAK-IN |
| ASTM A 771/A771M : 1995 | Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components |
| CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
| ASTM A 826/A826M : 1995 | Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components |
| MIL-PRF-11090 Revision K:2016 | CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT |
| PREN 14582 : DRAFT 2015 | CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
| I.S. EN 62321-3-2:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-2: SCREENING - TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
| UNE-EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
| BS EN 14582:2007 | Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods |
| EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
| 05/30133797 DC : DRAFT MAY 2005 | BS EN 14582 - CHARACTERISATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
| MIL L 9000 : H | LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL |
| 15/30319011 DC : DRAFT APR 2015 | BS EN 14582 - CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS |
| MIL C 11090 : F (1) | CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING |
| MIL L 2104 : F | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE |
| SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
| SAE J 2359 : 1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, MILITARY COMBAT/TACTICAL SERVICE |
| EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography |
| SAE J 311 : 2000 | FLUID FOR PASSENGER CAR TYPE AUTOMATIC TRANSMISSIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.