Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 7619 : 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

Available format(s)

Hardcopy , PDF

Superseded date

18-06-2022

Superseded by

ASTM D 7619 : 2022

Language(s)

English

Published date

20-07-2017

$135.86
Including GST where applicable

This test method uses a specific automatic particle counter2 (APC) to count and measure the size of dispersed dirt particles, water droplets and other particles, in light and middle distillate fuel, and bio fuels such as biodiesel and biodiesel blends, in the overall range from 4 µm(c) to 100 µm(c) and in the size bands ≥4 µm(c), ≥6 µm(c), and ≥14 µm(c).

Committee
D 02
DocumentType
Test Method
Pages
11
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This test method uses a specific automatic particle counter2 (APC) to count and measure the size of dispersed dirt particles, water droplets and other particles, in light and middle distillate fuel, and bio fuels such as biodiesel and biodiesel blends, in the overall range from 4 µm(c) to 100 µm(c) and in the size bands 4 µm(c), 6 µm(c), and 14 µm(c).

Note 1:ASTM and military specification fuels falling within the scope of this test method include Specifications: D975 grades 1D and 2D, D1655, D3699, D4814 (see 14.1.1.1), D6751, D7467, distillate grades of D396 and D2880, MIL-DTL-83133, and MIL-DTL-16884.

Note 2:For the purposes of this test method, water droplets are counted as particles, and agglomerated particles are detected and counted as a single larger particle. Dirt includes biological particles. Although the projected area of a particle is measured, this is expressed as the diameter of a sphere for the purposes of this test method.

Note 3:The notation (c), used with particle sizes, is used to denote that the apparatus has been calibrated in accordance with ISO 11171. Strictly this only applies to particles up to 50 µm.

Note 4:This test method may be used for particle sizes bands up to 100 µm(c), however the precision has only been determined for the size bands 4 µm(c), 6 µm(c), and 14 µm(c). All measurements are per millilitre.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 7467 : 2020 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 8166 : 2021 : REV A Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors
ASTM D 975 : 2021 Standard Specification for Diesel Fuel
ASTM D 1655 : 2021 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 8166 : 2017 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
ASTM D 7467 : 2019 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6300 : 2020 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6300 : 2013 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3699 : 2019 Standard Specification for Kerosine
ASTM D 4814 : 2004 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2008 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2014 : REV A : EDT 1 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 7467 : 2018 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 3699 : 2006 Standard Specification for Kerosine
ASTM D 4814 : 2016 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4177 : 2016 : EDT 1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 3699 : 2002 Standard Specification for Kerosine
ASTM D 1655 : 2011 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2012 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2006 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2014 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 396 : 2020 Standard Specification for Fuel Oils
ASTM D 4814 : 2001 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7467 : 2009 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 6300 : 2017 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2004 : REV B : EDT 1 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2006 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2015 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3699 : 2004 Standard Specification for Kerosine
ASTM D 1655 : 2021 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2000 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4177 : 1995 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2018 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 6751 : 2006 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2005 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2017 Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2017 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2011 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6751 : 2007 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 396 : 1998 Standard Specification for Fuel Oils
ASTM D 6751 : 2006 : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2014 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2001 Standard Specification for Aviation Turbine Fuels
ASTM D 6751 : 2018 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2009 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 2880 : 2000 Standard Specification for Gas Turbine Fuel Oils
ASTM D 1655 : 2011 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 6751 : 2007 : REV B : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 975 : 2019 : REV B Standard Specification for Diesel Fuel
ASTM D 4814 : 2018 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5854 : 1996 : R2010 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 1655 : 2020 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 7467 : 2010 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 6300 : 2016 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 3699 : 2013 : REV B Standard Specification for Kerosine
ASTM D 7467 : 2008 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 6751 : 2007 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2006 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2018 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2004 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 7467 : 2017 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 2880 : 1990 Standard Specification for Gas Turbine Fuel Oils
ASTM D 5854 : 2019 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 6751 : 2012 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 3699 : 2018 : REV A Standard Specification for Kerosine
ASTM D 4814 : 1995 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2009 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 975 : 2021 Standard Specification for Diesel Fuel
ASTM D 3699 : 2013 : REV B : EDT 1 Standard Specification for Kerosine
ASTM D 4814 : 2016 : REV : EDT 0 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2015 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 3699 : 2008 Standard Specification for Kerosine
ASTM D 7467 : 2015 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 1655 : 2008 Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2019 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6751 : 2014 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2002 Standard Specification for Aviation Turbine Fuels
ASTM D 2880 : 2013 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4814 : 2020 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3699 : 2013 Standard Specification for Kerosine
ASTM D 5854 : 1996 : R2005 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 7467 : 2015 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 4814 : 2012 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2006 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2016 Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2016 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2010 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2017 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3699 : 2005 Standard Specification for Kerosine
ASTM D 1655 : 2000 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2010 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2021 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6300 : 2019 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2003 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2880 : 2013 : REV A Standard Specification for Gas Turbine Fuel Oils
ASTM D 4814 : 2001 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2015 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2020 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6751 : 2011 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4814 : 2021 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2008 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 975 : 2020 : REV C Standard Specification for Diesel Fuel
ASTM D 4814 : 2021 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2880 : 2018 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4814 : 2003 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6751 : 2015 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2015 Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2880 : 1998 Standard Specification for Gas Turbine Fuel Oils
ASTM D 3699 : 2003 Standard Specification for Kerosine
ASTM D 1655 : 2007 Standard Specification for Aviation Turbine Fuels
ASTM D 7467 : 2015 : EDT 1 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 4177 : 2015 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7467 : 2015 : REV C Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 2880 : 2020 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4814 : 2020 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2004 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6751 : 2015 : REV C Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2015 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2020 : REV B Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6751 : 2015 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4814 : 2010 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2008 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2021 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2006 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 2880 : 2003 : R2010 Standard Specification for Gas Turbine Fuel Oils
ASTM D 1655 : 2012 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 7467 : 2014 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 4814 : 2009 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2014 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 3699 : 1978 Standard Specification for Kerosine
ASTM D 6751 : 2002 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6751 : 2003 : REV A Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6300 : 2015 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2011 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2014 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 1999 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 1985 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2016 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2008 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6751 : 2020 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4814 : 2002 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2011 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4177 : 1995 : R2010 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2019 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2004 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 3699 : 1998 Standard Specification for Kerosine
ASTM D 6751 : 2003 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 2880 : 2015 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4814 : 2006 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3699 : 2007 Standard Specification for Kerosine
ASTM D 6751 : 2008 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6751 : 2019 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4814 : 2007 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4177 : 1995 : R2000 Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM D 4814 : 2018 : REV D Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2006 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2016 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 5854 : 1996 : R2000 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 6300 : 2013 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 1992 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7467 : 2020 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 1655 : 2021 Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2014 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2015 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3699 : 2001 Standard Specification for Kerosine
ASTM D 7467 : 2018 : REV B Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 1655 : 2021 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 3699 : 2018 Standard Specification for Kerosene
ASTM D 4814 : 2007 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2004 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2014 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2009 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2016 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 6751 : 2015 : REV C : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7467 : 2009 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 6300 : 2008 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6300 : 2003 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 396 : 2021 Standard Specification for Fuel Oils
ASTM D 1655 : 2007 : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2000 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2018 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2013 Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2007 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2013 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 396 : 2009 Standard Specification for Fuel Oils
ASTM D 6751 : 2007 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2015 : REV D : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 2880 : 2014 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4814 : 2016 : REV D Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2017 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2021 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2000 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2006 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 7467 : 2015 : REV C : EDT 1 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 4814 : 2013 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2002 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2004 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2003 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 2880 : 2013 : REV B Standard Specification for Gas Turbine Fuel Oils
ASTM D 7467 : 2019 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 1655 : 2014 Standard Specification for Aviation Turbine Fuels
ASTM D 6751 : 2011 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2003 Standard Specification for Aviation Turbine Fuels
ASTM D 4177 : 2016 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 7467 : 2015 : REV B Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 1655 : 2009 Standard Specification for Aviation Turbine Fuels
ASTM D 3699 : 2013 : REV A Standard Specification for Kerosine
ASTM D 4177 : 1995 : R2005 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2011 Standard Specification for Aviation Turbine Fuels
ASTM D 2880 : 1996 Standard Specification for Gas Turbine Fuel Oils
ASTM D 6751 : 2011 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6300 : 2016 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6751 : 2015 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5854 : 2019 : REV A Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 4814 : 1993 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2020 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2019 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2880 : 2018 : REV A Standard Specification for Gas Turbine Fuel Oils
ASTM D 7467 : 2013 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 1655 : 2009 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2018 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2020 Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2018 Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2014 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 7467 : 2018 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 6751 : 2009 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4177 : 2015 : REV A Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2018 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2014 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2880 : 1978 Standard Specification for Gas Turbine Fuel Oils
ASTM D 4814 : 2021 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 1655 : 2019 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4814 : 2007 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2013 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6751 : 2010 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1655 : 2013 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 5854 : 1996 : R2015 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 2880 : 2003 Standard Specification for Gas Turbine Fuel Oils
ASTM D 6751 : 2002 : REV A Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 2880 : 2014 : REV A Standard Specification for Gas Turbine Fuel Oils

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more