ASTM D 7613 : 2017 : R2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
Hardcopy , PDF
09-06-2023
English
05-04-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 35
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers flexible polypropylene reinforced (fPP-R) and nonreinforced (fPP) geomembranes made from flexible polypropylene as the principal polymer prepared by the polymerization of propylene with or without other alpha olefin monomers.
1.2The tests and property limits used to characterize the sheet are values intended to ensure minimum quality. In-place system design criteria, such as field-seaming strength and material compatibility, among others, are factors that should be considered but are beyond the scope of this specification.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6434 : 2012 : R2018 | Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM D 5538 : 1998 | Standard Practice for Thermoplastic Elastomers-Terminology and Abbreviations |
| ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
| ASTM D 2136 : 2019 : EDT 1 | Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
| ASTM D 6636 : 2001 : R2023 | Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
| ASTM D 1004 : 1994 : REV A | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting |
| ASTM D 5199 : 2012 : R2019 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM G 154 : 2016 | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ASTM D 1004 : 2013 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 2136 : 1994 : R1998 | Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM D 5199 : 2001 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
| ASTM G 154 : 2023 | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials |
| ASTM D 5538 : 2013 : R2018 | Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations |
| ASTM D 1204 : 2014 : R2020 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 7004/D7004M : 2003 : R2021 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
| ASTM D 6636 : 2001 : R2018 | Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
| ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
| ASTM G 155 : 2021 | Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials |
| ASTM D 7004/D7004M : 2003 : R2013 : EDT 1 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
| ASTM D 6636 : 2001 | Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
| ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 1204 : 1994 : EDT 1 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM G 155 : 2013 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM D 6693 : 2001 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
| ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
| ASTM D 5884 : 1999 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
| ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
| ASTM D 1004 : 2021 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
| ASTM D 2136 : 2019 | Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.