ASTM D 746 : 2014 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
Available format(s)
PDF
Superseded date
06-08-2020
Superseded by
Language(s)
English
Published date
01-12-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 08.01, 2017 Defines the determination of the temperature at which plastics and elastomers (as defined by Terminology D 883) exhibit brittle failure under Specified impact conditions.
| Committee |
D 20
|
| DocumentType |
Redline
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method covers the determination of the temperature at which plastics and elastomers (as defined by Terminology D883) exhibit brittle failure under specified impact conditions. Two routine inspection and acceptance procedures are also provided.
Note 1:When testing rubbers for impact brittleness use Test Method D2137. When testing plastic sheeting for impact brittleness, use Test Method D1790.
1.2The values stated in SI units are to be regarded as the standard.
1.3Due to the potential safety and environmental hazards associated with mercury-filled thermometers, the use of alternative temperature measuring devices (such as thermocouples and RTDs) is encouraged.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 2:This test method and ISO 974 address the same subject matter, but differ in technical content.
| SAE AMS L P 390 : 2000 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) |
| CSA C22.2 No. 179 : 2009 : INC : UPD 1 : 2015 : R201400 | AIRPORT SERIES LIGHTING CABLES |
| CSA C22.2 No. 131 : 2014 | TYPE TECK 90 CABLE |
| MIL A 23940 : 0 | |
| CSA C68.10 : 2014 | SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV |
| MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| GR 1398 CORE : ISSUE 1 REV 1 | GENERIC REQUIREMENTS FOR COAXIAL DROP CABLE |
| BS ISO 4925:2005 | Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems |
| ASTM C 864 : 2005 : R2011 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
| MIL-A-46106 Revision B:1989 | ADHESIVE-SEALANTS, SILICONE, RTV, ONE-COMPONENT |
| MIL-DTL-28689 Revision C:1997 | CONTAINERS, SHIPPING AND STORAGE, STEEL WALL (WITH AND WITHOUT CABINETRY) |
| MIL-PRF-46846 Revision D:2013 | Rubber, Synthetic, Heat - Shrinkable |
| IEEE 1133-1988 | IEEE Application Guide for Evaluating Nonceramic Materials for High-Voltage Outdoor Applications |
| SAE AIR 1387 : 2016 | DESIGNING WITH ELASTOMERS FOR USE AT LOW TEMPERATURES, NEAR OR BELOW GLASS TRANSITION |
| MIL T 14398 : J | TANK, FABRIC, COLLAPSIBLE, WATER, NYLON, RUBBER-COATED |
| CSA Z245.20-Z245.21 : 2006 | EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE |
| MIL-B-41816 Revision H:1990 | BOOTS, COLD WEATHER, INSULATED, RUBBER (WET-COLD; DRY-EXTREME COLD) |
| ASTM C 1644 : 2006 : R2011 | Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
| MIL-H-53096 Base Document:1990 | HOSES & HOSE ASSEMBLIES, ELASTOMER, RUBBER, LIQUID FUEL, NON-COLLAPSIBLE, LOW TEMPERATURE |
| ASTM E 1783 : 1996 : R2000 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| BS ISO 13628-10 : 2005 AMD 16775 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| 03/312144 DC : DRAFT JULY 2003 | ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
| CSA C68.5 : 2013 | SHIELDED AND CONCENTRIC NEUTRAL POWER CABLE FOR DISTRIBUTION UTILITIES |
| MIL-P-51406 Revision A:1984 | PLASTIC SHEETS, VINYL CHLORIDE POLYMER AND COPOLYMER, FLEXIBLE |
| AASHTO M 251 : 2006 | SPECIFICATION FOR PLAIN AND LAMINATED ELASTOMERIC BRIDGE BEARINGS |
| SCTE 15 : 2016 | SPECIFICATION FOR TRUNK, FEEDER AND DISTRIBUTION COAXIAL CABLE |
| MIL PRF 7726 : K | RETREAD TIRES, RIBBED TREAD, PNEUMATIC AIRCRAFT |
| IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| ASTM A 975 : 2011 : R2016 | Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
| ASTM A 974 : 1997 : R2016 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM C 1644 : 2006 : R2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
| ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM C 509 : 2006 : R2011 | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material |
| NACE RP 03 04 : 2004 | DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES |
| ASTM D 5212 : 2003 | Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004) |
| ASTM D 2952 : 1995 | Specification for Ethylene Plastics (Withdrawn 1999) |
| ASTM D 3847 : 2001 : R2012 | Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures |
| SAE AMS 3193F : 2014(S2019) | SILICONE RUBBER SPONGE CLOSED CELL, MEDIUM, EXTREME LOW TEMPERATURE |
| ASTM D 3435 : 1980 | Specification for Plastic Containers (Jerry Cans) for Petroleum Products (Withdrawn 1987) |
| ASTM D 3847 : 2001 : R2018 | Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures |
| ASTM D 3847 : 2001 | Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures |
| ASTM E 1612 : 1994 : R2000 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM A 974 : 1997 : R2011 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM E 1612 : 1994 : R2005 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM D 3105 : 2017 : REDLINE | Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
| NFPA 262 : 2015 | METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES |
| BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
| MIL I 23053 : D | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED |
| ASTM E 1783 : 1996 : R2005 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| I.S. EN ISO 12086-2:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| MIL R 46846 : B | RUBBER, SYNTHETIC, HEAT-SHRINKABLE |
| ISO 4925:2005 | Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems |
| MIL-S-12100 Base Document:1952 | SHOCK MOUNT M-447. M-448, M-449 AND BRACKET FT-512 |
| 04/301931 DC : DRAFT JAN 2004 | ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| NF EN ISO 23936-1 : 2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| MIL-P-14591 Revision D:1976 | PLASTIC FILM, NONRIGID, TRANSPARENT |
| ASTM C 509 : 2006 | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material |
| MIL M 12863 : 0 | MOUNT, VIBRATION (VIBRATION MOUNTS MT-1177/U, MT-1178/U, MT-1179/U |
| MIL-B-50432 Base Document:1969 | BAG, BARRIER, NEOPRENE, FOR USE WITH 152MM CARTRIDGES |
| API 17L1 : 2013 | SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| MIL W 83420 : E | WIRE, ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL |
| ASTM D 864 : 1952 : R1978 | Method of Test for Coefficient of Cubical Thermal Expansion of Plastics |
| GR 2949 CORE : ISSUE 1 | GENERIC REQUIREMENTS FOR BURIED HYBRID COAXIAL/TWISTED PAIR CABLE |
| C22.2 NO. 96.2-18 | Flexible power cables for wind turbine applications rated up to 35 kV |
| CSA C22.2 No. 179 : 2009 | AIRPORT SERIES LIGHTING CABLES |
| CSA C22.2 No. 179 : 2 | AIRPORT SERIES LIGHTING CABLES |
| ASTM E 1612/E1612M : 1994 : R2017 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM C 509 : 2006 : R2015 | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing<brk/> Material |
| ASTM D 3350 : 2014 : REDLINE | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
| ASTM D 6455 : 2011 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM) |
| ASTM D 6134 : 2007 | Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems |
| ASTM D 350 : 2013 : REDLINE | Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation |
| ASTM F 2510/F2510M : 2017 : REDLINE | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes |
| ASTM D 5721 : 2008 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM C 864 : 2005 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
| I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| SAE AS 23053 : 2016 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| WC 3-1992 | RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY |
| C83-17 | COMMUNICATION AND POWER LINE HARDWARE |
| 10/30191247 DC : DRAFT APR 2010 | BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| ASTM D 5926 : 2015 : REDLINE | Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
| ASTM D 2287 : 2012 : REDLINE | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
| A-A-59520 Base Document:1999 | OVERSHOES, MEN'S AND WOMEN'S, BOOT, COMBAT |
| ASTM C 542 : 2005 : R2011 | Standard Specification for Lock-Strip Gaskets |
| SAE AMS 3196 : 2017 | SPONGE, SILICONE RUBBER CLOSED CELL, FIRM |
| UNE 53120:2016 | Plastics -- Determination of the brittleness temperature by impact |
| MIL-B-50873 Revision A:1971 | BAG, BARRIER, ELASTOMERIC |
| A-A-55697 Revision B:2012 | Tube, Nonmetallic; Polyvinyl Chloride (PVC) Flexible (for Laboratory and Medical Use) |
| UNI EN ISO 23936-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| MIL-PRF-11588 Revision H:2009 | HOSE ASSEMBLIES, RUBBER, SYNTHETIC, LIQUID PETROLEUM FUELS, DISPENSING, COLLAPSIBLE, STANDARD AND LOW TEMPERATURE |
| FM 6082 : 1988 | SAFETY BUNGS |
| MIL-P-20689 Revision D:1988 | PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) |
| A-A-59528 Base Document:1999 | SHOE, MOLDERS |
| 03/106442 DC : DRAFT APR 2003 | ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS |
| MIL F 14788 : NOTICE 1 | FABRICATED PART, SILICONE RUBBER (FOR USE IN AMMUNITION) |
| MIL-PRF-23586 Revision F:1996 | Sealing Compound (With Accelerator), Silicone Rubber, Electrical |
| UU B 001254 : NOTICE 1 | BINDER, LOOSE-LEAF, RING. ONE-PIECE COVER |
| ASTM F 790 : 2008 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| ASTM A 974 : 1997 : R2003 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM D 2671 : 2013 | Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
| MIL-I-22076 Revision B:1963 | INSULATION TUBING, ELECTRICAL, NONRIGID, VINYL, VERY LOW TEMPERATURE GRADE |
| CSA B137 COMPENDIUM : 2017 | THERMOPLASTIC PRESSURE PIPING COMPENDIUM |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| ASTM E 2203 : 2014 : R2018 | Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| CSA C68.3 : 1997 | |
| ASTM D 876 : 2013 : REDLINE | Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
| CSA B1800 SERIES : 2015 | THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM |
| ASTM D 5721 : 2008 : R2013 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| API 15S : 2016 | SPOOLABLE REINFORCED PLASTIC LINE PIPE |
| ASTM E 1783 : 1996 : R2009 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| BS EN ISO 12086-2:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| CSA S806: 2012 | DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
| UNI EN ISO 13628-2 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| CSA B182.7 : 2006 | PSM TYPE MULTILAYER POLYVINYLCHLORIDE (PVC) SEWER PIPE HAVING REPROCESSED-RECYCLED CONTENT |
| UNI EN ISO 12086-2 : 2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| SAE AMS R 83285 : 2011 | RUBBER, ETHYLENE-PROPYLENE, GENERAL PURPOSE |
| MIL-DTL-3533 Revision C:2009 | RUBBER, SYNTHETIC; SHEET, STRIP AND MOLDED |
| MIL PRF 5041 : K | TIRES, RIBBED TREAD, PNEUMATIC, AIRCRAFT |
| MIL-I-7444 Revision D:1984 | INSULATION SLEEVING, ELECTRICAL FLEXIBLE |
| MIL-T-13020 Revision C:1971 | TAPE, RUBBER UNVULCANIZED, SPLICING AND MOLDING (TAPES TO-317/U & TL-318/U). |
| MIL-PRF-82791 Base Document:1990 | Rubber, Silicone, TRV |
| MIL-P-51431 Revision A:1988 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE BUTENE 1 COPOLYMER, HIGH DENSITY |
| CSA C22.2 No. 179 : 2009 : R2014 | AIRPORT SERIES LIGHTING CABLES |
| MIL-P-63196 Revision A:1980 | POLYURETHANE ELASTOMER BINDER (FOR USE IN AMMUNITION) |
| MIL R 3533 : B | RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED |
| MIL-M-87176 Base Document:1982 | MOLDING MATERIAL, POLYPROPYLENE, MODIFIED MECHANICAL USE ONLY |
| L-P-390 Revision C:1971 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY) |
| BS EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries. Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics |
| MIL-PRF-370 Revision K:2017 | HOSE AND HOSE ASSEMBLIES, NONMETALLIC: ELASTOMERIC, LIQUID FUEL |
| MIL-I-3190 Revision F:1991 | INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR |
| MIL-DTL-23053 Revision E:1996 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| MIL-S-81732 Base Document:1969 | SEALING COMPOUND, ELECTRICAL, HIGH STRENGTH, ACCELERATOR REQUIRED |
| SAE AS 50141 : 2012 | TUBE, PNEUMATIC TIRE, AIRCRAFT |
| ASTM D 1764 : 1997 | Standard Specification for Rubber Latex Products for Automotive Applications (Withdrawn 2003) |
| SAE AMS3195 : 2014 | SILICONE RUBBER SPONGE CLOSED CELL, MEDIUM |
| BS ISO 12086-2 : 2001 AMD 10637 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS |
| API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| I.S. EN ISO 23936-1:2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| ASTM D 5593 : 1999 : EDT 1 | Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005) |
| ASTM D 6134 : 2007 : R2013 | Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems |
| ASTM D 6455 : 2011 : R2018 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs) |
| ASTM E 1783/E1783M : 1996 : R2017 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| CSA 6.26 : 2018 | FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| ISO 12086-2:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
| ISO 13628-2:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) |
| SAE J 2028 : 2016 | FRONT-WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS |
| MIL-B-21408 Revision G:1984 | BOOTS, SAFETY |
| MIL-B-83277 Revision A:1975 | BOOTS, FLYERS FWU-8/P |
| MIL S 23586 : E | SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR REQUIRED |
| MIL-C-10369 Revision D:1958 | CABLE, TELEPHONE, FIELD, FOR RAPID PAYOUT (MX-306 A/G) |
| CSA Z245.20 SERIES : 2014 | PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE |
| MIL R 82791 : 0 | RUBBER, SILICONE, RTV |
| DOD-STD-35-121 Base Document:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, EYELETS, FERRULES, AND GROMMETS |
| ASTM E 1612 : 1994 : R2009 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM A 975 : 2011 | Standard Specification for Double<span class='unicode'>–</span>Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
| MIL-A-47040 Base Document:1974 | ADHESIVE-SEALANT, SILICONE, RTV, HIGH TEMPERATURE |
| MIL-F-50022 Base Document:1959 | FACEBLANK (FOR CD V-805 MASK) |
| 07/30150249 DC : 0 | BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| SAE AMS 3194 E : 2014 | Silicone Rubber Sponge, Closed Cell, Firm, Extreme Low Temperature(STABILIZED Jun 2019) |
| MIL-DTL-83420 Revision P:2017 | WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR |
| L-T-790 Revision B:1976 | TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY AND MEDICAL USE) |
| 04/30091870 DC : DRAFT FEB 2004 | BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| SAE AMS DTL 23053 : 1999 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| ISO/TS 18226:2006 | Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
| ASTM F 790 : 2008 : R2013 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| ASTM C 542 : 2005 | Standard Specification for Lock-Strip Gaskets |
| CSA C22.2 No. 96.1 : 2016 | MINE POWER FEEDER CABLES |
| ASTM E 1612/E1612M : 1994 : R2013 : EDT 1 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM C 542 : 2005 : R2017 | Standard Specification for Lock-Strip Gaskets |
| ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
| ASTM C 1644 : 2006 | Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
| ASTM E 1783/E1783M : 1996 : R2013 : EDT 1 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM A 974 : 1997 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM A 1107/A1107M : 2017 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes |
| CSA/ANSI LC 1 : 2018 | FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING |
| ASTM D 3847 : 2001 : R2007 | Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures |
| ASTM C 864 : 2005 : R2015 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
| IEEE 789-2013 | IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments |
| BS 8081:1989 | Code of practice for ground anchorages |
| DIN EN ISO 12086-2:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ISO 974:2000 | Plastics Determination of the brittleness temperature by impact |
| ASTM E 608/E608M : 2013 : REDLINE | SPECIFICATION FOR MINERAL-INSULATED, METAL-SHEATHED BASE METAL THERMOCOUPLES |
| ASTM D 1790 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
| ASTM D 832 : 2007 : R2018 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.