ASTM D 7195 : 2021
Current
The latest, up-to-date edition.
Standard Guide for Setting Object Color Specifications
Hardcopy , PDF
English
23-06-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 12
|
| DocumentType |
Guide
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide leads the user through a process for establishing color specifications, including the target color and allowable tolerances. It refers to the appropriate ASTM standards that more thoroughly describe each step of the process beginning with expectations, encompassing caveats within the process and finally concluding with reporting.
1.2This guide does not suggest numerical values for tolerances. These values must be agreed upon by the parties involved.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1499 : 2016 | Standard Guide for Selection, Evaluation, and Training of Observers |
| ASTM E 805 : 2022 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM D 2244 : 2021 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 4086 : 2018 : R2023 | Standard Practice for Visual Evaluation of Metamerism |
| ASTM E 1808 : 1996 : R2015 | Standard Guide for Designing and Conducting Visual Experiments |
| ASTM D 2244 : 2023 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1729 : 2016 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 5531 : 2017 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM E 179 : 2017 | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
| ASTM E 2867 : 2014 : R2019 | Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry |
| ASTM E 284 : 2022 | Standard Terminology of Appearance |
| ASTM D 5531 : 2017 : R2023 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM E 1808 : 1996 : R2021 | Standard Guide for Designing and Conducting Visual Experiments |
| ASTM D 3134 : 2015 : R2024 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM E 179 : 2017 : R2022 | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
| ASTM E 805 : 2012 : REV A : R2017 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM E 1164 : 2012 : R2023 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1345 : 1998 : R2019 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 1499 : 2016 : R2023 | Standard Guide for Selection, Evaluation, and Training of Observers |
| ASTM D 3134 : 2015 : R2019 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM E 2214 : 2020 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM E 308 : 2018 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM D 2244 : 2022 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1164 : 2023 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 4449 : 2015 : R2021 | Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM D 1729 : 2022 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM E 2214 : 2023 | Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments |
| ASTM E 2867 : 2014 : R2023 | Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry |
| ASTM E 308 : 2022 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM E 1345 : 2024 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 1164 : 2012 : R2017 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 284 : 2017 | Standard Terminology of Appearance |
| ASTM D 4086 : 2018 | Standard Practice for Visual Evaluation of Metamerism |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.