Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 709 : 2017

Current

Current

The latest, up-to-date edition.

Standard Specification for Laminated Thermosetting Materials

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

18-04-2017

$147.32
Including GST where applicable

This specification covers laminated thermosetting materials consisting of two or more plies or layers of reinforcing material bonded by a thermosetting synthetic resin.

Committee
D 09
DocumentType
Standard
Pages
35
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification covers laminated thermosetting materials consisting of two or more plies or layers of reinforcing material bonded by a thermosetting synthetic resin. Examples of such reinforcement are cellulose paper, cotton fabric, glass fabric, and synthetic fiber fabrics. These materials are available in the form of sheets, rolled and molded tubes, and molded rods.

1.2The values stated in inch-pound units are to be regarded as the standard.

Note 1:This specification resembles IEC 60893-3 in title only. The content is significantly different.

1.3The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM F 992 : 2017 Standard Specification for Valve Label Plates
ASTM D 2132 : 2019 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
ASTM D 618 : 2021 Standard Practice for Conditioning Plastics for Testing

ASTM D 883 : 2023 Standard Terminology Relating to Plastics
ASTM D 495 : 2014 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM D 3636 : 2024 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D 883 : 2024 : REV A Standard Terminology Relating to Plastics
ASTM D 621 : 1964 : R1988 : EDT 1 Test Methods for Deformation of Plastics Under Load
ASTM D 3636 : 2000 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D 883 : 2024 Standard Terminology Relating to Plastics
ASTM D 2303 : 1997 : R2004 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials (Withdrawn 2013)
ASTM D 1711 : 2002 Standard Terminology Relating to Electrical Insulation
ASTM D 2304 : 2010 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ASTM D 257 : 2014 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D 883 : 2022 Standard Terminology Relating to Plastics
ASTM D 2304 : 2023 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ASTM D 2304 : 1997 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
ASTM D 1711 : 2011 Standard Terminology Relating to Electrical Insulation
ASTM D 3636 : 2013 : REV A : EDT 1 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D 1711 : 2011 : REV A Standard Terminology Relating to Electrical Insulation
ASTM D 1711 : 2024 : REV A Standard Terminology Relating to Electrical Insulation
ASTM D 2303 : 1997 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
ASTM D 6054 : 1997 Standard Practice for Conditioning Electrical Insulating Materials for Testing
ASTM D 1711 : 2013 Standard Terminology Relating to Electrical Insulation
ASTM D 621 : 1964 : R1988 Test Methods for Deformation of Plastics Under Load (Withdrawn 1994)
ASTM D 495 : 1999 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM D 3636 : 2006 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D 1711 : 1999 Standard Terminology Relating to Electrical Insulation
ASTM D 2303 : 2013 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
ASTM D 3636 : 2019 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D 3636 : 2013 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D 2303 : 2020 : EDT 1 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
ASTM D 1711 : 2014 : REV A Standard Terminology Relating to Electrical Insulation
ASTM D 1180 : 1957 : R1978 Method of Test for Bursting Strength of Round Rigid Plastic Tubing (Withdrawn 1989)
ASTM D 229 : 2019 : EDT 1 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
ASTM D 1711 : 2015 Standard Terminology Relating to Electrical Insulation
ASTM D 1711 : 2014 Standard Terminology Relating to Electrical Insulation
ASTM D 2304 : 2018 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ASTM D 1711 : 2024 Standard Terminology Relating to Electrical Insulation
ASTM D 1711 : 2022 Standard Terminology Relating to Electrical Insulation
ASTM D 3636 : 2013 : REV A Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D 1711 : 2020 Standard Terminology Relating to Electrical Insulation
ASTM D 1180 : 1957 : R1976 Method of Test for Bursting Strength of Round Rigid Plastic Tubing
ASTM D 3636 : 2011 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D 1711 : 2008 Standard Terminology Relating to Electrical Insulation
ASTM D 6054 : 1997 : R2004 Standard Practice for Conditioning Electrical Insulating Materials for Testing (Withdrawn 2012)
ASTM D 495 : 2022 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM D 257 : 2014 : R2021 : EDT 1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D 2303 : 2020 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more