ASTM D 704 : 1999 : R2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Melamine-Formaldehyde Molding Compounds
Available format(s)
Hardcopy , PDF
Superseded date
04-12-2020
Superseded by
Language(s)
English
Published date
12-12-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 08.01, 2015 Deals with compression molding, thermosetting, melamine-formaldehyde molding compounds, resin binder, with/without other resins, combined with pigments, fillers and any chemical agents required.
| Committee |
D 20
|
| DocumentType |
Standard
|
| Pages |
3
|
| ProductNote |
Reconfirmed 2012
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers compression molding, thermosetting, melamine-formaldehyde molding compounds as further defined in 4.1, resin binder, with or without other resins, intimately combined with fillers, pigments, and any chemical agents needed.
1.2The values stated in SI units are to be regarded as the standard.
Note 1—The properties included in this specification are those required to identify the types of molding compounds covered. There may be other requirements necessary to identify particular characteristics. These will be added to the specification as their inclusion becomes generally desirable and the necessary test data and methods become available. Transfer or injection molding will usually result in different physical and electrical characteristics than compression molding.
| ASTM D 1896 : 1999 | Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds |
| ASTM D 495 : 2014 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 3892 : 2015 : R2020 | Standard Practice for Packaging/Packing of Plastics |
| ASTM D 3638 : 2012 : REDLINE | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ISO 2112:1990 | Plastics Aminoplastic moulding materials Specification |
| ASTM D 6289 : 2013 | Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ASTM D 5224 : 2000 | Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds |
| ASTM D 5224 : 2000 : R2006 | Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds |
| ASTM D 3795 : 2000 : REV A : R2006 | Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer |
| ASTM D 3892 : 1993 : R2003 | Standard Practice for Packaging/Packing of Plastics |
| ASTM D 3892 : 2015 | Standard Practice for Packaging/Packing of Plastics |
| ASTM D 3892 : 1993 : R1998 | Standard Practice for Packaging/Packing of Plastics |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM D 3638 : 2007 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 1896 : 1999 : R2004 | Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds |
| ASTM D 3795 : 2000 : REV A : R2012 | Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer |
| ASTM D 3795 : 2020 | Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer |
| ASTM D 6289 : 2013 : R2019 | Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ASTM D 1895 : 1996 | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ASTM D 6289 : 1998 | Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ASTM D 6289 : 2003 | Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ASTM D 3638 : 2012 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 5224 : 2012 | Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds |
| ASTM D 1895 : 1996 : R2010 : EDT 1 | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM D 5224 : 2012 : R2019 | Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds |
| ASTM D 731 : 2010-07 | TEST METHOD FOR MOLDING INDEX OF THERMOSETTING MOLDING POWDER |
| ASTM D 3638 : 1993 : R1998 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 648 : 2016 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ASTM D 6289 : 2008 | Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ASTM D 3892 : 1993 : R2009 | Standard Practice for Packaging/Packing of Plastics |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| ASTM D 1895 : 1996 : R2003 | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ASTM D 1895 : 1996 : R2010 | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ASTM D 1895 : 2017 : REDLINE | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ASTM D 1895 : 2017 | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| ASTM D 1896 : 2009 | Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds |
| ASTM D 3892 : 2015 : REDLINE | PRACTICE FOR PACKAGING/PACKING OF PLASTICS |
| ASTM D 3795 : 2000 : REV A | Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.