ASTM D 695 : 2023
Current
Current
The latest, up-to-date edition.
Standard Test Method for Compressive Properties of Rigid Plastics
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
09-08-2023
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 20
|
| DocumentType |
Test Method
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers the determination of the mechanical properties of unreinforced and reinforced rigid plastics, including high-modulus composites, when loaded in compression at relatively low uniform rates of straining or loading. Test specimens of standard shape are employed. This procedure is applicable for a composite modulus up to and including 41,370 MPa (6,000,000 psi).
1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
Note 1:For compressive properties of resin-matrix composites reinforced with oriented continuous, discontinuous, or cross-ply reinforcements, tests may be made in accordance with Test Method D3410/D3410M or D6641/D6641M.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in 13.1.
Note 2:This standard is equivalent to ISO 604.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1425 : 2019 | Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures |
| ASTM D 6641/D6641M : 2016 : EDT 2 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
| ASTM F 3131 : 2014 : R2023 | Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages |
| ASTM D 5592 : 1994 : R2018 | Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
| ASTM D 7791 : 2022 | Standard Test Method for Uniaxial Fatigue Properties of Plastics |
| ASTM D 2990 : 2017 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ASTM F 1429 : 1999 : R2022 | Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell |
| ASTM F 450 : 2013 : R2019 | Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic) |
| ASTM D 4101 : 2017 : EDT 1 | Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
| ASTM D 3410/D3410M : 2016 : EDT 1 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
| ASTM F 2902 : 2016 : EDT 1 | Standard Guide for Assessment of Absorbable Polymeric Implants |
| ASTM F 1309 : 2023 | Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations |
| ASTM D 5364 : 2014 : R2019 | Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units |
| ASTM D 8066/D8066M : 2023 | Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates |
| ASTM D 229 : 2019 : EDT 1 | Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
| ASTM D 5948 : 2005 : R2020 | Standard Specification for Molding Compounds, Thermosetting |
| ASTM C 1292 : 2022 | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM F 2759 : 2019 | Standard Guide for Assessment of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
| ASTM F 1635 : 2016 | Standard Test Method for <emph type="bdit">in vitro</emph> Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
| ASTM D 2412 : 2021 | Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading |
| ASTM C 881/C881M : 2020 : REV A | Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete |
| ASTM F 639 : 2009 : R2015 | Standard Specification for Polyethylene Plastics for Medical Applications |
| ASTM F 3489 : 2023 | Standard Guide for Additive Manufacturing of Polymers — Material Extrusion — Recommendation for Material Handling and Evaluation of Static Mechanical Properties |
| ASTM F 2565 : 2021 | Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications |
| ASTM F 3087 : 2015 | Standard Specification for Acrylic Molding Resins for Medical Implant Applications |
| ASTM F 2150 : 2019 | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products |
| ASTM F 2820 : 2012 : R2021 : EDT 1 | Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
| ASTM F 3333 : 2020 | Standard Specification for Chopped Carbon Fiber Reinforced (CFR) Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| ASTM D 4000 : 2023 | Standard Classification System for Specifying Plastic Materials |
| ASTM D 3517 : 2019 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ASTM F 790 : 2023 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| ASTM D 5813 : 2004 : R2018 | Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems |
| ASTM D 5467/D5467M : 1997 : R2017 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
| ASTM D 3914 : 2002 : R2016 | Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod |
| ASTM D 6456 : 2010 : R2018 | Standard Specification for Finished Parts Made from Polyimide Resin |
| ASTM D 3754 : 2019 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
| ASTM C 582 : 2023 | Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment |
| ASTM F 711 : 2017 : R2022 | Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools |
| ASTM F 451 : 2021 | Standard Specification for Acrylic Bone Cement |
| ASTM F 2977 : 2020 | Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
| ASTM D 619 : 2021 | Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation |
| ASTM C 1424 : 2015 : R2019 | Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature |
| ASTM F 2953 : 2012 : R2021 | Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages |
| ASTM C 1358 : 2018 | Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures |
| ASTM D 3262 : 2020 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| ASTM D 3753 : 2020 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells |
| ASTM D 1039 : 2016 : R2022 | Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation |
| ASTM D 7745 : 2019 | Standard Practice for Testing Pultruded Composites |
| ASTM D 3748 : 2014 : R2019 | Standard Practice for Evaluating High-Density Rigid Cellular Plastics |
| ASTM F 3510 : 2021 | Standard Guide for Characterizing Fiber-Based Constructs for Tissue-Engineered Medical Products |
| ASTM F 561 : 2019 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| ASTM D 3846 : 2008 : R2015 | Standard Test Method for In-Plane Shear Strength of Reinforced Plastics (Withdrawn 2024) |
| ASTM F 2433 : 2005 : R2018 | Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness |
| ASTM D 4762 : 2018 | Standard Guide for Testing Polymer Matrix Composite Materials |
| ACI SPEC-548.10:2022 | Type Methyl Methacrylate Slurry (MMS) Polymer Overlays for Bridge and Parking Garage Deck— Specification |
| SAE AMS3643A | PLASTIC MOLDINGS, THERMOSETTING Silicone, Glass Roving Filled, Heat Resistant |
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM D 5947 : 2018 | Standard Test Methods for Physical Dimensions of Solid Plastics Specimens |
| ASTM D 6641/D6641M : 2023 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
| ASTM D 6641/D6641M : 2016 : EDT 2 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
| ASTM D 3410/D3410M : 2016 : R2024 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM D 5947 : 2024 | Standard Test Methods for Physical Dimensions of Solid Plastics Specimens |
| ASTM E 4 : 2024 | Standard Practices for Force Calibration and Verification of Testing Machines |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.