ASTM D 6373 : 2021
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Performance-Graded Asphalt Binder
Hardcopy , PDF
12-07-2023
English
09-02-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 04
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification2 covers asphalt binders graded by performance. Grading designations are related to the LTPPBind calculated maximum pavement design temperature and the minimum pavement design temperature. This specification contains Tables 1 and 2. Table 2 incorporates Practice D6816 for determining the critical low cracking temperature using a combination of Test Method D6648 and Test Method D6723 test procedures. If no table is specified, the default is Table 1.
Note 1:For more information on LTPPBind online, see https://infopave.fhwa.dot.gov/Tools/LTPPBindOnline accessed June 10, 2020.
Note 2:For asphalt cements graded by penetration at 25 °C, see Specification D946/D946M. For asphalt cements graded by viscosity at 60 °C, see Specification D3381/D3381M.
Note 3:AASHTO R 29 provides non-mandatory information for determining the performance grade of an asphalt binder.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6932/D6932M : 2021 | Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures |
| ASTM D 7064/D7064M : 2021 | Standard Practice for Open-Graded Friction Course (OGFC) Asphalt Mixture Design |
| ASTM D 6816 : 2021 | Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders (Withdrawn 2021) |
| ASTM D 6816 : 2011 : R2016 | Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders |
| ASTM D 6521 : 2019 : REV A | Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) |
| ASTM D 7175 : 2015 | Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer |
| ASTM D 6648 : 2008 : R2016 | Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) |
| ASTM D 6932/D6932M : 2008 : R2013 | Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures |
| ASTM D 6114/D6114M : 2019 | Standard Specification for Asphalt-Rubber Binder |
| ASTM D 7643 : 2016 | Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders |
| ASTM D 7564/D7564M : 2016 | Standard Practice for Construction of Asphalt-Rubber Cape Seal |
| ASTM D 4552/D4552M : 2020 | Standard Classification for Hot-Mix Recycling Agents |
| ASTM D 7064/D7064M : 2008 : R2013 | Standard Practice for Open-Graded Friction Course (OGFC) Mix Design |
| ASTM D 4887/D4887M : 2011 : R2016 | Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials |
| ASTM D 7405 : 2020 | Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer |
| ASTM D 8225 : 2019 | Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature |
| ASTM D 5360 : 2015 | Standard Practice for Design and Construction of Bituminous Surface Treatments |
| ASTM D 8044 : 2016 | Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures |
| ASTM D 946/D946M : 2020 | Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction |
| ASTM D 7553 : 2015 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
| ASTM D 6816 : 2011 : R2016 | Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders |
| ASTM D 7553 : 2015 : R2021 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
| ASTM D 6816 : 2021 | Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders (Withdrawn 2021) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.