ASTM D 6234 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
Hardcopy , PDF
12-09-2020
English
01-09-2013
This test method covers a procedure for the shake leaching of mining waste containing at least 80 % dry solids (≤20 % moisture) in order to generate a solution to be used to determine the inorganic constituents leached under the specified testing conditions that conform to the synthetic precipitation leaching procedure (SPLP).
Committee |
D 34
|
DocumentType |
Test Method
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method covers a procedure for the shake leaching of mining waste containing at least 80 % dry solids (≤20 % moisture) in order to generate a solution to be used to determine the inorganic constituents leached under the specified testing conditions that conform to the synthetic precipitation leaching procedure (SPLP).
1.2This test method calls for the shaking of a known weight of mining waste with acidic extraction fluid of a specified composition as well as the separation of the liquid phase for analysis. The pH of the extraction fluid is to reflect the pH of acidic precipitation in the geographic region in which the waste being tested is to be disposed.
1.3This test method is intended to describe the procedure for performing single batch extractions only. It does not describe all types of sampling, sample preservation, and analytical requirements that may be associated with its application.
1.4The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 8155 : 2017 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
ASTM E 2242 : 2013 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM E 1915 : 2013 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
ASTM D 8187 : 2018 | Standard Guide for Interpretation of Standard Humidity Cell Test Results |
ASTM E 2242 : 2002 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM E 1915 : 2007 : REV A | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry |
ASTM D 5744 : 2007 : EDT 1 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
ASTM D 3370 : 1995 : REV A : R2003 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
ASTM D 5744 : 2013 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
ASTM E 1915 : 1999 | Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry |
ASTM D 2777 : 2012 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
ASTM D 5744 : 1996 | Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell |
ASTM D 2777 : 2003 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
ASTM D 3370 : 2010 | Standard Practices for Sampling Water from Closed Conduits |
ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 5744 : 2012 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
ASTM E 1915 : 2005 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry |
ASTM D 2777 : 1998 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
ASTM D 3370 : 2008 | Standard Practices for Sampling Water from Closed Conduits |
ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
ASTM E 1915 : 2009 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
ASTM E 1915 : 2001 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry |
ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
ASTM D 3987 : 1985 : R1999 | Standard Test Method for Shake Extraction of Solid Waste with Water |
ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
ASTM E 2242 : 2007 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
ASTM D 5744 : 2013 : EDT 1 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
ASTM D 3987 : 2012 | Standard Practice for Shake Extraction of Solid Waste with Water |
ASTM E 1915 : 2011 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
ASTM E 1915 : 2013 | Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
ASTM D 2777 : 2008 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 2777 : 2006 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM E 2242 : 2013 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
ASTM D 3370 : 1976 | Standard Practices for Sampling Water |
ASTM E 2242 : 2012 : REV A | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
ASTM D 5744 : 2007 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
ASTM D 3370 : 1995 : REV A : R1999 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
ASTM E 2242 : 2012 : EDT 1 | Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
ASTM D 3370 : 2007 | Standard Practices for Sampling Water from Closed Conduits |
ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
ASTM D 3987 : 1985 : R2004 | Standard Test Method for Shake Extraction of Solid Waste with Water |
ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
ASTM D 3987 : 2006 | Standard Test Method for Shake Extraction of Solid Waste with Water |
ASTM D 5744 : 2018 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
ASTM D 2777 : 2008 : EDT 1 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 3987 : 2012 : R2020 | Standard Practice for Shake Extraction of Solid Waste with Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.