ASTM D 5900 : 2017 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
Available format(s)
Hardcopy , PDF
Superseded date
24-11-2020
Superseded by
Language(s)
English
Published date
16-02-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 11
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the chemical and physical quality specifications or requirements, or both, for Industry Reference Materials (IRMs) as cited in Practice D4678 and other standards.
1.2IRMs, as evaluated and referenced in Practice D4678, are vitally important to conduct product, specification, and development testing in the rubber and carbon black industries.
1.3Before a new lot of material can be accepted as an IRM, it must comply with the specifications prescribed in this specification. However, these specifications are only part of the requirements. Other requirements as given in Practice D4678 shall be met before a candidate material can be formally accepted as an IRM.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 4678 : 2015 : REV A | Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
| ASTM D 5964 : 2016 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
| ASTM D 471 : 2016 : REV A | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 4936 : 1996 | Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/ Titration |
| ASTM D 1646 : 2000 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 2161 : 2005 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 4569 : 2006 | Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur |
| ASTM D 4936 : 2010 : R2015 | Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration |
| ASTM D 3280 : 1985 : R1999 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM D 4569 : 2002 | Standard Test Method for Rubber Chemicals—Determination of Acidity in Sulfur |
| ASTM D 4574 : 2006 : R2012 | Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content |
| ASTM D 2161 : 2019 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 6738 : 2011 | Standard Test Method for Precipitated Silica<char: emdash>Volatile Content |
| ASTM D 1646 : 2004 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 2501 : 1991 : R2000 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 2007 : 2003 : R2008 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| ASTM D 3157 : 1984 : R2001 | Standard Test Method for Rubber from Natural Sources—Color |
| ASTM D 3194 : 2004 | Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI) |
| ASTM D 3280 : 1985 : R2020 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM D 2161 : 2010 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 1747 : 2009 : R2019 | Standard Test Method for Refractive Index of Viscous Materials |
| ASTM D 4315 : 1994 : R2001 | Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
| ASTM D 1993 : 1991 : R1997 | Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
| ASTM D 1646 : 1981 | Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer) |
| ASTM D 5289 : 2006 | Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
| ASTM D 4936 : 2005 | Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration |
| ASTM D 1993 : 2003 : R2013 | Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
| ASTM D 4578 : 2006 : R2012 | Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction |
| ASTM D 2140 : 1997 | Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 2161 : 1982 | Standard Method for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 1519 : 1995 : R2009 : EDT 1 | Standard Test Method for Rubber Chemicals-Melting Range |
| ASTM D 4569 : 1989 : R1998 | Standard Test Method for Rubber Chemicals-Determination of Acidity in Sulfur |
| ASTM D 6854 : 2012 : REV A | Standard Test Method for Silica-Oil Absorption Number |
| ASTM D 4570 : 2002 : R2012 | Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM D 1278 : 1991 : REV A : R2002 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 5289 : 2007 | Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
| ASTM D 5289 : 2017 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 2161 : 2010 : EDT 1 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 2007 : 2003 : EDT 1 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| ASTM D 1519 : 1995 : R2019 | Standard Test Methods for Rubber Chemicals—Determination of Melting Range |
| ASTM D 5289 : 2007 : REV A | Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
| ASTM D 1519 : 1995 : R2009 | Standard Test Method for Rubber Chemicals-Melting Range |
| ASTM D 4075 : 2002 | Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals |
| ASTM D 4571 : 1994 : R1998 | Standard Test Methods for Rubber Chemicals-Determination of Volatile Material |
| ASTM D 1278 : 1991 : REV A : R1997 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 4075 : 2006 : R2017 | Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals |
| ASTM D 4678 : 2004 | Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
| ASTM D 4004 : 2006 | Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
| ASTM D 2007 : 2019 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| ASTM D 6738 : 2015 : R2019 | Standard Test Method for Precipitated Silica—Volatile Content |
| ASTM D 4678 : 1994 | Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
| ASTM D 1500 : 2004 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 1646 : 2019 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 3280 : 1985 : R2004 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM D 1960 : 1986 : R1995 : EDT 1 | Standard Test Method for Loss on Heating of Drying Oils (Withdrawn 2003) |
| ASTM D 4075 : 1987 : R1997 | Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals |
| ASTM D 1980 : 1987 : R1998 | Standard Test Method for Acid Value of Fatty Acids and Polymerized Fatty Acids (Withdrawn 2007) |
| ASTM D 3157 : 2005 | Standard Test Method for Rubber from Natural Sources—Color |
| ASTM D 3157 : 2005 : R2010 : EDT 1 | Standard Test Method for Rubber from Natural Sources—Color |
| ASTM D 6845 : 2002 | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 1519 : 1995 : R2014 | Standard Test Methods for Rubber Chemicals—Determination of Melting Range |
| ASTM D 1646 : 2019 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 4678 : 2011 | Standard Practice for Rubber<char: emdash>Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
| ASTM D 6739 : 2020 | Standard Test Method for Silica—pH Value |
| ASTM D 5289 : 2019 : REV A | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 3157 : 2005 : R2015 | Standard Test Method for Rubber from Natural Sources—Color |
| ASTM D 2007 : 2011 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| ASTM D 5289 : 2019 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 4936 : 2010 | Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration |
| ASTM D 6739 : 2011 | Standard Test Method for Silica<char: emdash>pH Value |
| ASTM D 6739 : 2001 | Standard Test Method for Silica—pH Value |
| ASTM D 2007 : 2002 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method |
| ASTM D 4934 : 2002 : R2012 | Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles |
| ASTM D 4578 : 2006 | Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction |
| ASTM D 1965 : 1987 : R1998 | Standard Test Method for Unsaponifiable Matter in Drying Oils, Fatty Acids, and Polymerized Fatty Acids (Withdrawn 2007) |
| ASTM D 4578 : 1989 : R1998 | Standard Test Methods for Rubber Chemicals-Determination of Percent Insoluble Sulfur by Solvent Extraction |
| ASTM D 1500 : 2012 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 6845 : 2002 : R2008 | Standard Test Method for Silica, Precipitated, Hydrated<span class='unicode'>—</span>CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 6738 : 2001 | Standard Test Method for Precipitated Silica—Volatile Content |
| ASTM D 4315 : 1994 : R2017 | Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
| ASTM D 1993 : 2003 : R2008 | Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
| ASTM D 1959 : 1997 | Standard Test Method for Iodine Value of Drying Oils and Fatty Acids (Withdrawn 2006) |
| ASTM D 4574 : 2006 : R2017 | Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content |
| ASTM D 1278 : 1991 : REV A : R2015 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 2140 : 2008 | Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 4936 : 2010 : R2019 | Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration |
| ASTM D 1646 : 2003 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 2501 : 2011 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 1646 : 2015 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 4574 : 1994 : R1998 | Standard Test Methods for Rubber Chemicals-Determination of Ash Content |
| ASTM D 4578 : 2006 : R2017 | Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction |
| ASTM D 6854 : 2003 | Standard Test Method for Silica—<i>n</i>-Dibutyl Phthalate Absorption Number |
| ASTM D 6854 : 2015 : REV A | Standard Test Method for Silica—Oil Absorption Number (OAN) (Withdrawn 2018) |
| ASTM D 4678 : 2004 : R2009 : EDT 1 | Standard Practice for Rubber<char: emdash>Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
| ASTM D 3194 : 2004 : R2009 | Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI) |
| ASTM D 2007 : 2001 : REV A | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method |
| ASTM D 4574 : 2006 | Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content |
| ASTM D 4578 : 1989 : R2002 | Standard Test Methods for Rubber Chemicals—Determination of Percent Insoluble Sulfur by Solvent Extraction |
| ASTM D 1646 : 2003 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1500 : 2003 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 1278 : 1991 : REV A : R2011 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 2501 : 1991 : R2005 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 1747 : 1962 : R1978 | Standard Test Method for Refractive Index Of Viscous Materials |
| ASTM D 1500 : 1982 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 6739 : 2001 : R2006 | Standard Test Method for Silica - pH Value |
| ASTM D 1747 : 2009 | Standard Test Method for Refractive Index of Viscous Materials |
| ASTM D 3157 : 2005 : R2020 | Standard Test Method for Rubber from Natural Sources—Color |
| ASTM D 2140 : 2008 : R2017 | Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 5289 : 1995 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 5668 : 2009 | Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter |
| ASTM D 5289 : 2012 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 1500 : 2002 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 2007 : 2011 : R2016 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| ASTM D 6845 : 2018 | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 4570 : 2002 | Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM D 2501 : 2014 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 4934 : 2002 | Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles |
| ASTM D 1519 : 1995 : R2000 | Standard Test Method for Rubber Chemicals-Melting Range |
| ASTM D 3280 : 1985 : R2009 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM D 6845 : 2020 | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 1500 : 1998 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 3194 : 1999 | Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI) |
| ASTM D 5668 : 2009 : R2014 | Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter |
| ASTM D 1982 : 1985 : R1999 | Standard Test Method for Titer of Fatty Acids |
| ASTM D 1500 : 2012 : R2017 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 5668 : 2019 | Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter |
| ASTM D 4571 : 2006 : R2012 | Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material |
| ASTM D 4571 : 2002 | Standard Test Methods for Rubber Chemicals—Determination of Volatile Material |
| ASTM D 4570 : 2002 : R2017 | Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM D 1278 : 1991 : REV A : R2002 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 1747 : 2009 : R2014 | Standard Test Method for Refractive Index of Viscous Materials |
| ASTM D 4678 : 2015 : REV A | Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
| ASTM D 1646 : 2006 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 4569 : 2006 : R2017 | Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur |
| ASTM D 1951 : 1986 : R1995 : EDT 1 | Standard Test Method for Ash in Drying Oils and Fatty Acids (Withdrawn 2003) |
| ASTM D 3194 : 2017 | Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI) |
| ASTM D 6845 : 2012 | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 1646 : 2007 : R2012 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1982 : 1985 : R2009 | Standard Test Method for Titer of Fatty Acids |
| ASTM D 4574 : 2002 | Standard Test Methods for Rubber Chemicals—Determination of Ash Content |
| ASTM D 6738 : 2001 : R2006 | Standard Test Method for Precipitated Silica-Volatile Content |
| ASTM D 4934 : 1994 : R1998 : EDT 1 | Standard Test Method for Rubber Compounding Materials 2-Benzothiazyl Sulfenamide Accelerators-Insolubles |
| ASTM D 4004 : 1993 : R2002 | Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
| ASTM D 4569 : 2006 : R2012 | Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur |
| ASTM D 4571 : 2006 : R2017 | Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material |
| ASTM D 4572 : 1989 : R2017 | Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur |
| ASTM D 3280 : 1985 : R2014 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM D 4934 : 2002 : R2017 | Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles |
| ASTM D 4572 : 1989 : R2005 | Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur |
| ASTM D 1747 : 1999 | Standard Test Method for Refractive Index of Viscous Materials |
| ASTM D 2161 : 1993 : R1999 : EDT 2 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 1278 : 1991 : REV A : R2020 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 5668 : 1999 | Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter |
| ASTM D 4571 : 2006 | Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material |
| ASTM D 1982 : 2013 : R2017 | Standard Test Method for Titer of Fatty Acids |
| ASTM D 4678 : 2015 : REV A : R2019 | Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
| ASTM D 2007 : 2003 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| ASTM D 1646 : 2007 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 3037 : 1993 | Standard Test Methods for Carbon Black—Surface Area by Nitrogen Adsorption (Withdrawn 1999) |
| ASTM D 1646 : 2017 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 4315 : 1994 : R2006 | Standard Test Methods for Rubber Compounding Material-Zinc Oxide |
| ASTM D 1993 : 2018 | Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
| ASTM D 6854 : 2003 : R2008 | Standard Test Method for Silica<span class='unicode'>—</span><span class="bdit">n</span>-Dibutyl Phthalate Absorption Number |
| ASTM D 4572 : 1989 : R2012 | Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur |
| ASTM D 1993 : 2003 | Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
| ASTM D 1982 : 1985 : R2004 | Standard Test Method for Titer of Fatty Acids |
| ASTM D 4934 : 2002 : R2006 | Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators-Insolubles |
| ASTM D 6738 : 2015 | Standard Test Method for Precipitated Silica—Volatile Content |
| ASTM D 4315 : 1994 | Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
| ASTM D 4075 : 2006 | Standard Test Methods for Rubber Compounding Materials—Flame Atomic AbsorptionAnalysis—Determination of Metals |
| ASTM D 4678 : 2004 : R2009 | Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
| ASTM D 2161 : 2010 : R2016 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 2161 : 1966 | Standard Method Of Test For Conversion Of Kinematic Viscosity To Saybolt Universal Viscosity Or To Saybolt Furol Viscosity |
| ASTM D 4004 : 2006 : R2012 | Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
| ASTM D 6854 : 2012 | Standard Test Method for Silica—<emph type="bdit">n</emph>-Dibutyl Phthalate Absorption Number |
| ASTM D 1278 : 1991 : REV A : R2007 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 4004 : 2006 : R2017 | Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
| ASTM D 2007 : 2001 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method |
| ASTM D 4315 : 1994 : R2012 | Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
| ASTM D 1646 : 1992 | Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1500 : 2004 : REV A | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 6854 : 2015 | Standard Test Method for Silica-Oil Absorption Number |
| ASTM D 1500 : 2007 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 4004 : 1993 : R1998 | Standard Test Methods for Rubber-Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
| ASTM D 1993 : 2003 : R2013 : EDT 1 | Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
| ASTM D 2161 : 2004 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 1519 : 1995 : R2004 : EDT 1 | Standard Test Method for Rubber Chemicals-Melting Range |
| ASTM D 2501 : 2014 : R2019 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 4570 : 1986 : R1998 | Standard Test Method for Rubber Chemicals-Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM D 6739 : 2011 : R2015 | Standard Test Method for Silica—pH Value |
| ASTM D 2161 : 2017 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 4075 : 2006 : R2012 | Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals |
| ASTM D 5668 : 2008 | Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter |
| ASTM D 2161 : 2005 : EDT 1 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 2140 : 2003 | Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin |
| ASTM D 2007 : 1998 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay—Gel Absorption Chromatographic Method |
| ASTM D 4570 : 2002 : R2007 | Standard Test Method for Rubber Chemicals<span class='unicode'>—</span>Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM D 1982 : 2013 | Standard Test Method for Titer of Fatty Acids |
| ASTM D 4678 : 2015 | Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
| ASTM D 4572 : 1989 : R1999 | Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur |
| ASTM D 3157 : 1984 : R1995 : EDT 1 | Standard Test Method for Rubber from Natural Sources—Color |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.